Search
100 articles for “crystallinity”
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Flaws and Defects in Crystals
Abstract: Crystalline materials are defined by their long-range atomic order; however, no real crystal is completely free from imperfections. This article provides a comprehensive overview of the various types of crystal defects and imperfections that occur in solid materials and their significant influence on material properties. Point defects, including vacancies, interstitials, and substitutional atoms, are examined alongside line defects such as edge and screw dislocations, as well as planar defects encompassing …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 1–15 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Structure–Optical Property Correlation of Co-Doped TiO₂ and ZnO Nanofillers for Advanced Functional Composite Applications
Abstract: This study investigates the enhancement of the structural and optical properties of titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles through cobalt (Co) doping. Pristine TiO₂ and ZnO are widely studied metal oxides; however, their large band gaps and limited visible-light absorption restrict their performance in optoelectronic, photocatalytic, and environmental applications. Co doping is employed as an effective strategy to overcome these limitations by inducing band-gap narrowing, creating defect-related electronic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1374–1394 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
A Comparative Study of the Structure-Property Relationships in CAD/CAM Milled vs. 3D-Printed High-Performance Polymers: Impact of Molecular Orientation on Abrasive Wear
Abstract: Background: The transition from subtractive to additive manufacturing in prosthetic dentistry has introduced significant variations in the macromolecular architecture of high-performance polymers. While CAD/CAM milling utilizes high-density, industrially polymerized blocks, 3D printing (Additive Manufacturing) relies on layer-by-layer deposition, which may induce anisotropic molecular orientation. This retrospective study investigates how these distinct manufacturing "thermal histories" influence the long-term abrasive wear resistance of PEEK and PEKK restorations.Materials and Methods: Data were retrospectively …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Comparative Study of Soft Soils Characteristics with Cement Waste Dust, Lime Powder and Boiled Rice Water
Abstract: Improvement of soft soil properties and effective pavement system performance of soft soils can be done only by stabilization process. It is an effective method. Jointly or individually, Chemical and/or Mechanical stabilization is done for various soils depending on the nature of that soil. As far as soft soils are concern, they are having reactive nature and so chemical stabilization is the best choice to improve such soil. Mainly, in …
Published in Recent Trends in Civil Engineering & Technology Read article
-
AQUASOMES: A Vesicular, Self-assembled Ceramic Nanoparticulate Drug Carrier
Abstract: Nano-biopharmaceutics involves delivery of biopharmaceutical product through different biomaterials like multi-functional nanoparticles, quantum dots, aquasomes, super-paramagnetic iron oxide crystals, and liposomes dendrimers. Aquasomes are considered as one of the most recently developed delivery systems for bioactive molecules like peptides, proteins, hormones, antigens and genes to specific sites. Aquasomes have a spherical shape and a particle size of 60–300 nm. These are three layered self-assembled nano-particulate carrier system. This three-layered structure …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 12, Issue 3, 2025 · pp. 1–14 Read article
-
Preparation and Characterization of TiO2 Nanoparticles by Green Method
Abstract: In this study, we attempted to synthesize TiO2 nanoparticles utilizing titanium tetrachloride as a precursor and an aqueous extract of Sansevieria plant leaves. Atomic force microscopy (AFM), X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) analysis were used to identify the synthesized TiO2 nanoparticles As per the surface topography, the average diameter of nanoparticles is considered as 67.73 nm. Debye-Scherrer equation was …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 61–67 Read article
-
A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition
Abstract: In the proposed work, Zinc oxide nano particles (ZnO NP's) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal decomposition. The samples are characterized using X- ray diffraction (XRD), UV visible spectroscopy (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The XRD pattern exhibit single-phase polycrystalline nature of all the samples exhibiting the most intense peak at (101). The diffraction peaks are located at 31.80, 34.46, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 39–45 Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article
-
Examining the Medicinal Role of Alum in Unani Medicine: An Overview of Traditional Uses and Scientific Investigations
Abstract: Alum, also known as Shibb-e-Yamani, is a crystalline substance devoid of color, transparent, and lacking any scent. It possesses a sweetish astringent flavor and is categorized as a hydrated double salt. Typically, it comprises aluminum sulfate, water molecules as part of its structure, and the sulfate of another element. Frequently, it's found mixed with impurities. To render it suitable for medicinal usage, a process involves dissolving it in boiling water, …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 13, Issue 1, 2024 · pp. 1–9 Read article
-
Crystal Engineering Strategies for Tailoring Mechanical Properties of Structural Materials
Abstract: Crystal engineering has emerged as a promising approach for designing materials with tailored mechanical properties, enabling advancements in various fields such as aerospace, automotive, and construction. This review examines the diverse strategies employed in crystal engineering to manipulate the mechanical behavior of structural materials. One key strategy involves controlling the crystal structure at the atomic level through techniques such as alloying, doping, and phase transformations. Alloying introduces foreign atoms into …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 1, 2024 · pp. 01–06 Read article
-
Molluscan distribution in and around Munroe Island, Kollam, Kerala
Abstract: The current investigation endeavors to comprehend the variation of Molluscan species, specifically gastropods, at Munroe Island in the Kollam district of Kerala. Munroe Island, is a traditional backwater village positioned at the meeting point of the Ashtamudi backwater and the Kallada River system. Comprising of eight small islands, it covers a combined area of 13.4 km2.The primary lithology of the island consists of sedimentary rocks on the mainland and low-lying …
Published in International Journal of Marine Life · Vol. 1, Issue 1, 2024 · pp. 1–7 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
Pharmacological Review On Enzalutamide
Abstract: A key therapeutic option in the treatment of prostate cancer, especially metastatic castration-resistant prostate cancer (mCRPC), is Enzalutamide, a second-generation anti androgen drug. Enzalutamide, discovered by Charles Sawyer and Michael Jung at the University of California, Los Angeles, was developed and Food and Drug Administration (FDA)-approved in 2012. Its therapeutic significance was further solidified with subsequent extensions in indications to encompass metastatic castration-sensitive prostate cancer and non-metastatic castration-resistant prostate cancer. …
Published in Trends in Drug Delivery · Vol. 11, Issue 2, 2024 · pp. 7–15 Read article
-
Temperature dependence of Schmidt number of composite material based liquid lithium
Abstract: This work presents a simple formalism for Schmidt number and its temperature dependence for liquid lithium. It is explained that the temperature dependence of Schmidt number (Sc = η/ ρD) can be understood through dependence of topological-short-range-order (TSRO) parameter on temperature. Expression for Schmidt number has been deduced in terms of average potential energy US of superficial core, probability of diffusional displacement (P) and the TSRO parameter (x) . Calculations …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 206–212 Read article
-
Differential Scanning Calorimetry, Thermogravimetric Analysis, and Dynamic Mechanical Analysis for Advanced Medical Materials
Abstract: Modern healthcare depends on advanced medical products that come up with new ways to care for and help patients. Characterizing these products is important to make sure they are safe, effective, and work well. While there are many analysis methods, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and Dynamic Mechanical Analysis (DMA) are the most important ones for checking the temperature and mechanical qualities of medical materials. By measuring the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 57–72 Read article
-
Effect of Bismuth doping on Thiourea crystals : A NLO Material
Abstract: Single crystals of pure and thiourea-substituted bismuth were successfully grown using the slow evaporation solution growth technique at ambient temperature. The impact of thiourea doping on the crystal properties was thoroughly investigated. Solubility tests for the grown samples were conducted at various temperatures, providing crucial data on the dissolution characteristics. Structural characterization of these crystals was performed using single crystal X-ray diffraction (XRD), confirming their crystalline nature. Energy-dispersive X-ray spectroscopy …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 10–16 Read article