Search
48 articles for “Optimized Metal Matrix Optimization”
-
Mechanical and Morphological Analysis of Jute/Manila Hemp Hybrid Composites for Enhanced Structural Performance
Abstract: Natural fiber composites are renowned for their lightweight, strength, corrosion resistance, and high strength-to-weight ratio, often surpassing traditional metals. Despite challenges such as poor fiber-matrix adhesion and moisture susceptibility, hybridizing composites present a viable solution by enabling tailored properties for optimal performance. This study investigates hand-lay-up processed natural fiber composites, specifically woven jute/epoxy, non-woven manila hemp/epoxy, and their hybrid variants. Extensive testing was conducted on mechanical properties including hardness, flexural …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 1–11 Read article
-
Examining Experimentally the Impact of Spot-Welding Process Variables on Metal Matrix Composites
Abstract: Metal matrix composites work in concert with reinforcement to improve the material's qualities. Reliability in joining metal matrix composites using traditional methods is challenging. Friction Stir Welding has demonstrated the ability to solve numerous issues that arise in traditional welding procedures. Initially, the Friction Stir Welding (FSW) welding procedure produced metal seams that were solid. Additionally, FSW was expanded to join MMCs and their alloys. The purpose of this review …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 193–201 Read article
-
High-Performance Aluminum Matrix Composites Reinforced with Graphene Nanoplatelets a Study on Mechanical and Thermal Behaviour
Abstract: This study investigates the effect of graphene nanoplatelets (GNPs) on the mechanical and thermal properties of aluminum matrix composites (AMCs) fabricated using the powder metallurgy route. Aluminum alloy Al-6061 powder was reinforced with varying GNP concentrations (0, 0.5, 1, 2, and 3 wt%), followed by uniaxial compaction and sintering. The influence of GNP content on the composite’s structural integrity, strength, and thermal behavior was thoroughly evaluated through tensile testing, hardness …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 38–49 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
Enhancement of Mechanical Properties in Eutectic Al-Si Alloy Matrix Composites Reinforced with Kyanite and Graphite via Stir Casting
Abstract: The purpose of this work is to enhance the mechanical performance of a eutectic Al–Si alloy by incorporating hard ceramic (kyanite) and soft solid lubricant (graphite) reinforcements using a liquid-state stir casting route. Metal matrix composites were fabricated with kyanite contents of 2, 4, and 6 wt.% and a constant 2.5 wt.% graphite. Their microstructures and mechanical properties were systematically evaluated. The microstructure was examined using optical microscopy and energy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 90–100 Read article
-
Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance
Abstract: The ever-growing demands of modern mechanical applications necessitate the development of materials with superior mechanical properties. In this research, we delve into the creation and evaluation of Aluminum Metal Matrix Composites (Al MMCs) made via the powder metallurgy route, reinforced with both micro and Nano-scale particles. The key aim is to investigate the possible cooperative effects of this dual reinforcement approach on the mechanical behavior of the composite. Traditional aluminum …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 220–229 Read article
-
Improvement of Geometric Tolerances and Mechanical Properties of Aluminum Hybrid Metal Matrix Composites
Abstract: In the field of metal matrix composite materials, there has been a generous thrust towards the development of electrical discharge machining (EDM). In this study, stir casted aluminum hybrid metal matrix composites were successfully machined using EDM by analyzing the input process parameters namely, pulse-on time, peak current, and gap voltage using L27 orthogonal array. The ideal conditions for various output responses such as material removal rate, circularity, and radial …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1583–1592 Read article
-
Wear Attribute of Aluminium Metal Matrix Composite Reinforced With MWCNT, Produced By FSP, On A Vertical Milling Machine
Abstract: The exceptional properties of Aluminium metal matrix composites (AMMCs) like good hardness, specific strength, enhanced wear rate made huge demand in the automobile and aerospace industries. The classical methods of manufacturing AMMCs leave problems at the interface of matrix and reinforcement segregation, like an agglomeration of reinforcements, wettability etc. To overcome this, an alternate, innovative method of fabricating aluminium matrix surface composites has been invented, which is termed friction stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 525–539 Read article
-
Magnetic Metal–Polymer Composites with Ferromagnetic Particle Networks for EMI Shielding in Flexible Electronics
Abstract: The rapid expansion of flexible and wearable electronic systems has intensified the demand for lightweight, mechanically compliant materials capable of effective electromagnetic interference (EMI) shielding. In this study, magnetic metal–polymer composites with magnetically aligned ferromagnetic particle networks were developed and systematically investigated for EMI shielding in flexible electronics. Thermoplastic polyurethane (TPU) was employed as an elastomeric polymer matrix due to its excellent flexibility, dielectric characteristics, and compatibility with particulate fillers. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 25–39 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Direct Synthetic Routes of MXenes and Their Application in Carbon Fiber Reinforced Plastics (CFRPs) As Supplementary Sizing Layer†
Abstract: Sized carbon fibers with a supplementary sizing layer of MXenes (synthesized via traditional MAX phases), bonded to carbon fibers (CFs) as well as the resin matrix via different kinds of physicochemical (van der Waals force, hydrogen bonding, covalent bonding) interactions enhanced the performance of the resulting carbon fiber reinforced plastic (CFRP) materials. This is because of the strong interface generated due to the appearance of MXene at the interface of …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 1, 2024 · pp. 07–13 Read article
-
Assessment of Sustainable Composite for UAV structural Application
Abstract: Now-a-days aligned with global mission the growth of Unmanned aerial vehicle (UAV) application is enormous in the field of agriculture, defence, surveying etc., This research work investigates the improvement in strength of polymer matrix composite material of adding epoxy polymer resin with novel bio fibers such as Tamarindus and Morinda. The composite material was fabricated by using hand-layup method later its mechanical properties are analysed by numerical method as well …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 359–377 Read article
-
An Experimental Investigation of Machining Parameters on Aluminum Composites
Abstract: The need for a material with good mechanical, thermal, and wear resistant properties is satisfied by aluminum composite. However, the biggest obstacle to substituting it with alternative materials is the machining challenges. For this kind of hard-to-cut material, electric discharge machining is a very efficient method. Thus, using a Taguchi-based method, an attempt has been made to determine the most advantageous amount of input parameters for EDM of Al composite. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 8–13 Read article
-
Low density polyurethane based antistatic coating for PU flexible foam for launch vehicles
Abstract: Polyurethane (PU) is a multi functional polymer prepared by using more than two types of monomers. The unique properties of PU come from monomers, thus broadening the applicability of PU in many different sectors. Furthermore, the antistatic property of PU coatings can be improved by the addition of conductive fillers into matrix thus broadening its application in the manufacture of electronic products, aerospace systems and daily necessities and so on. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 25–30 Read article
-
Recent Progress in Magnesium Hybrid Metal Matrix Composites: Processing, Properties, and Applications
Abstract: Magnesium hybrid composites have emerged as promising materials to meet the growing demands of advanced sectors such as biomedical, aerospace, defense, automotive, electronics, and marine industries. However, the inherent drawbacks of magnesium, specifically low wear resistance, have encouraged scientists to develop magnesium-based MMC with improved mechanical properties and thermal properties. To achieve this, various mixtures of reinforcement are employed. These include ceramics with high strength and wear resistance; solid lubricants …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1287–1301 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Stabilization of Heavy Metal Sludge to Pass the TCLP Test Using Cement with a Sinter as a Additive
Abstract: According to the U.S. Stabilisation is the best-proven technology now in use, according to the Environmental Protection Agency's definition in Title 40, Part 268 of the Code of Federal Regulations (40 CFR 268).This method prevents harmful contaminants from leaking into the environment by physically and chemically trapping them all in a matrix. The investigations used 15 different water-mixed combinations of cement, fly ash, sinter, and lime. The study also examined …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 16–24 Read article
-
Effect of Hybridization on Tensile and Flexural Strengths of Carbon, Glass and Steel Fiber Composites: A Comparative Study
Abstract: Fiber reinforced polymer composites are widely recognized for their high strength-to-weight ratio, excellent corrosion resistance, and design flexibility making them ideal for various engineering applications. Despite their numerous advantages, traditional composites possess significant limitations such as restricted mechanical performance under diverse loading conditions. To address this, hybrid fiber polymer composites are developed while enhancing material performance. In the present study, synthetic (carbon, glass) and metallic (steel) fiber reinforced composite materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 621–635 Read article
-
Design and Validation of an Artificial Intelligence-Driven Digital Twin for Real-Time Monitoring and Control in Polymer Composite Manufacturing
Abstract: Polymer Matrix Composites (PMCs) have become indispensable in high-performance sectors such as aerospace and automotive engineering, offering exceptional strength-to-weight ratios that outperform traditional metals in many demanding applications. However, the reliability of manufacturing PMCs via Vacuum-Assisted Resin Transfer Molding (VARTM) is frequently undermined by stochastic process variabilities. Unpredictable fluctuations in thermal history, preform permeability, resin rheology, and ambient conditions often lead to some defects; namely voids, dry spots, and incomplete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 224–233 Read article