Search
62 articles for “Cut-off frequency”
-
Optimization and Analysis of InGaAs Vertical Nanowire Transistor for Memory Array Applications
Abstract: In this paper, we present a cylindrical gate all around In 0.53 Ga 0.47 As Vertical Nanowire Transistor (VNWT) on silicon at ultra-shortchannel gate length 14nm by numerical simulation approach. The In 0.53 Ga 0.47 As VNWT device dimensions like diameter, source and drainextension length and channel doping are taken as critical process parameters and optimized for better performance. The proposed device isscalable up-to 10nm with a maximum On-current of …
Published in Journal of VLSI Design Tools and Technology · Vol. 13, Issue 2, 2023 · pp. 32–44 Read article
-
Comparison Between Theoretical, Analytical and Experimental Vibration Analysis Method and Different Circular Tile Cutter by Using FFT and ANSYS
Abstract: Circular cutters with uniform radial cracks are extensively used in the cutting processes. Unwanted noise, vibration and accidental failure associated with the cutting process have become an important economic and technological problem in the industry. The knowledge of natural frequencies of components is of great interest in the study of response of structures to various excitations. Hence, it is important to study a circular tile cutter with central hole, which …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 3, 2015 · pp. 31–42 Read article
-
Assessment of Acoustic Noise Generated from Machines in a Mechanical Workshop Using 1-Octave Band Frequency Analysis
Abstract: Acoustic noise is one of the prominent occupational health hazards, particularly in manufacturing and process industries. Prolonged exposure to loud noise can cause noise induced hearing loss of the exposed personnel. Limiting the exposure to noise intensity within its permissible exposure limit is adopted as one of the administrative control measures to reduce the risk of hearing loss. However, frequency specific assessment of occupational noise exposure is limited. Here, we …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 1, 2021 · pp. 10–14 Read article
-
Finite Element, Experimental, and Machine Learning-Based Optimization of Machining Stability for Polymer Composite Material Processing
Abstract: The machining of polymer composite materials, particularly fibre-reinforced polymer-matrix composites, requires stable spindle-tool performance to avoid delamination, fibre pull-out, matrix cracking, thermal softening, poor surface integrity, and premature tool wear. In line with the scope of the Journal of Polymer & Composites, this study presents an integrated finite element, experimental, and machine learning framework for improving machining stability during end-milling of composite material systems. The spindle-tool assembly is modelled using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
FEA Simulation for Optimization of Laminated Composite Plate with Cutout in Free Vibrations
Abstract: Laminated composites have a large application in engineering. The work done in this study is to seethe free vibration response of graphite epoxy composite square plate subjected to different boundaryconditions. Finite element analysis has been done on the software ANSYS. The results obtained by thesimulation have been compared with those obtained from a published data obtained by semianalyticalsolution. It is observed that the solutions through ANSYS and that obtained throughanalytic …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 1, 2021 · pp. 6–17 Read article
-
FEA Simulation for Optimization of Laminated Composite Plate with Cutout in Free Vibrations
Abstract: Laminated composites have a large application in engineering. The work done in this study is to see the free vibration response of graphite epoxy composite square plate subjected to different boundary conditions. Finite element analysis has been done on the software ANSYS. The results obtained by the simulation have been compared with those obtained from a published data obtained by semianalytical solution. It is observed that the solutions through ANSYS …
Published in Journal of Experimental & Applied Mechanics Read article
-
Advancing UAV Video Transmission: A Full-Duplex System with RF and Signal Processing for Reliable, Long-Range HD Communication
Abstract: Unmanned aerial vehicles (UAVs) have transformed industries by enabling advanced aerial imaging and data collection. However, transmitting high-definition (HD) video from UAVs to ground stations poses challenges such as limited range, bandwidth constraints, and interference. This paper presents the development of an HD, full-duplex video transmission system using cutting-edge electronic technologies, including advanced radio frequency (RF) systems and signal processing. These electronic systems are designed to ensure fast, reliable, and …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 2, Issue 2, 2024 · pp. 38–45 Read article
-
Piezosurgery in Periodontics and Implantology: The Future Tool for Traditional Procedures?
Abstract: This review summarizes current knowledge and experience of piezosurgical device in periodontics and implantology which was developed in 1988. This device uses a modulated ultrasonic frequency that permits highly precise and safe cutting of hard tissue. The chief advantages of piezosurgery include decreased blood loss, soft tissue protection and less vibration and noise that increases comfort of the patient. The main indications in periodontics are supragingival and subgingival scaling and …
Published in Research and Reviews: A Journal of Dentistry · Vol. 4, Issue 2, 2013 · pp. 15–22 Read article
-
Broadband, M- shaped Rectangular Cutting Slotted Antenna at 2.5 GHz for Mobile and WLAN Application
Abstract: In this paper, the authors have discussed M-shaped cutting slotted antenna for mobile and WLAN applications. After designing the antenna on 2.5 GHz frequency, the authors used the dielectric substrate 4.4, loss tangent 0.0012 and having the substrate height 1.6 mm and the antenna is showing the bandwidth 52.4%; the maximum return loss is −14.5 db.
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 1, 2015 · pp. 5–8 Read article
-
A Watch E-cut shape Textile Antenna for WB Application
Abstract: AbstractIn this article, a Watch E-cut shape Microstrip textile antenna has been simulated under CST Software using bending material i.e. Jeans. The dielectric constant of Jeans material is 1.7. For antenna to be wearable Jeans substrate is used. The return loss of Watch E-cut shaped antenna is -54 dB at 6.3 GHz resonant frequency. It covers the bandwidth from 5 GHz to 7 GHz. In this paper simulated results like …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 29–32 Read article
-
Triangle Cut Circle Shape Bending Antenna for Wide Band Application
Abstract: In this article, an antenna has been simulated for the frequency range of 2.00 GHz to 13.00 GHz, i.e., wideband applications under simulation Software CST using bending material. This bending material is having very less dielectric constant of 1.7. For bending the antenna, Jeans material is used. The return loss of bending antenna is -26 dB at 3.837 GHz resonant frequency. Also, the loss tangent of the antenna is 0.025. …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 14–17 Read article
-
RFID-Enabled Smart Shelves and Cart System
Abstract: With the fast-paced development of Radio Frequency Identification (RFID) technology, the retail sector is seeing a revolutionary change to improve stock management, cut operational costs, and improve consumer satisfaction. The comparative advantages of RFID-smart shelves and carts over conventional stock management practices, such as barcode scanning and manual stock management, are investigated in this work. Compared to the other methods, in terms of accuracy, efficiency, cost-effectiveness, and scalability, RFID smart …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 2, 2025 · pp. 31–37 Read article
-
Optimization of Process Parameters of an Induction Furnace for Aluminium 6061 using Robust Design Approach
Abstract: Electric induction furnaces are extensively used in the foundry industries for the preparation of alloys and metal castings. The induction furnace works on the principal of electromagnetic induction. Some of the applications of induction heating include heat treatment, melting, surface treatment and in food industry. The detailed study about the working of an induction furnace was done. The induction furnace procured by mechanical department of our college is made by …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 1, 2017 · pp. 6–12 Read article
-
Power System Stabilizer Design based on Honey-Bee Mating Optimization Algorithm
Abstract: Power system stability is one of the main factors in performance of electrical system. A control system must retain frequency and voltage size under any distortion such as sudden increase in load, to leave a generator from circuit or cut off a transmission line in a constant level. In this paper, Honey-bee mating optimization (HBMO) algorithm has been used to design power system stabilizer. It is based on the mating …
Published in Trends in Electrical Engineering · Vol. 4, Issue 3, 2014 · pp. 18–25 Read article
-
Rectangular Micro Strip Patch Antenna Interconnected with Symmetrical Cut Hexagonal Shaped between Horizontal Lines Meta Material Structure Enhancement Bandwidth at 1.80 GHz
Abstract: This paper proposes a new generation of antenna that applies Metamaterial (MTM) properties at ground plane. The paper analyzes the performance of Microstrip Patch Antenna with and without using the MTM structure. Rectangular Microstrip Patch Antenna (RMPA) interconnected with symmetrical cut hexagonal shaped between horizontal lines MTM structure is proposed for enhancement of bandwidth and reduction of return loss at operating frequency of 1.80 GHz. The proposed antenna is designed …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 15–20 Read article
-
Piezo in Implant Surgery: A Literature Review
Abstract: Dental Implants are Titanium cylinders that are widely used by dentists as prosthesis to replace damaged or lost tooth. The process where the implant locks and attaches itself with the bone is termed as osseointegration. Factors like bone quality and quantity, primary stability of implant, surface characteristics of implant are some of the factors that determine osseointegration of the implant.Acceleration of osseointegration may depend on the removal of negative tissue …
Published in Research and Reviews: A Journal of Dentistry · Vol. 14, Issue 2, 2023 · pp. 17–20 Read article
-
EMERGING CHALLENGES IN RFID IN LIBRARY: A REVIEW
Abstract: A library is a living, breathing entity. Because of the advancement of the Internet and new information technology, library and information workers now have tremendous potential. RFID (Radio Frequency Identification), the pinnacle of ubiquitous computer technology, has long been the talk of the town and is employed by a variety of organizations, including libraries and information centers. RFID is a cutting-edge automated library technology that automatically identifies and tracks library …
Published in Journal of Advancements in Library Sciences · Vol. 11, Issue 1, 2024 Read article
-
6G Frontier Exploration Analysis: Technologies, Vision, Insight and Challenges
Abstract: 6G wireless communication represents a revolutionary leap forward in connectivity, offering unprecedented speed, reliability, and security. Emphasizing machine-to-machine communication, terahertz frequencies, and advanced security protocols, 6G aims to create a data-driven society where connectivity is instant and limitless. By integrating cutting-edge innovations such as artificial intelligence, 6G has the capacity to reshape various sectors, including healthcare, urban planning, and manufacturing, facilitating smarter and more efficient systems. The current paper provides …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 11, Issue 2, 2024 · pp. 25–33 Read article
-
Design of Ultra Wideband Square Aperture Shaped Microstrip (ASM) Antenna
Abstract: AbstractA compact coplanar waveguide-fed (CPW) microstrip antenna for ultra-wideband (UWB) wireless communication is presented. The antenna comprises a square aperture (24 mm × 24 mm) etched on the ground-plane of a printed circuit board and a modified rectangular shaped stub, also total size of the antenna is 30 mm × 30 mm. The lower edge of the band is attained by properly decoupling the resonant frequencies due to proper selection …
Published in Journal of Communication Engineering & Systems · Vol. 3, Issue 2, 2013 · pp. 15–19 Read article
-
Histopathological Findings of Endometrium and its clinico-pathological co-relation
Abstract: Background: Endometrial diseases are ranked among the most common gynecological disorders that affect women globally. These diseases cut across all age groups and contribute significantly to increased morbidity and mortality. Aim: To establish a database with respect to histopathological patterns and frequencies of endometrial diseases in women of various age groups. Materials and Methods: This prospective study was conducted in a Tertiary care Hospital in Sangli (Maharashtra) for a period …
Published in Research and Reviews: A Journal of Health Professions · Vol. 7, Issue 3, 2017 · pp. 33–38 Read article