Search
44 articles for “CF-ABS”
-
CFD Analysis of a Bladeless Propelling Unit for the Drones
Abstract: Conventionally, unmanned aerial vehicles (UAVs) and autonomous aerial vehicles (AAVs) utilize bladed propellers to produce lift, altitude, and thrust for propulsion. Yet, these blades are susceptible to abrasion when they contact external surfaces, resulting in diminished operational efficiency over time. Our ongoing investigation introduces a pioneering approach by integrating bladeless propeller technology, drawing inspiration from Dyson’s Bladeless Fan Theory. This study seeks to address the wear-related shortcomings of conventional propeller …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 3, 2024 · pp. 37–46 Read article
-
Aerodynamic Flow Separation Control Using Active Flow Devices
Abstract: Flow separation remains a significant challenge in aerodynamic applications, often leading to increased drag, loss of lift, and reduced efficiency in air and ground vehicles. This study investigates the use of active flow control (AFC) devices to mitigate flow separation and enhance aerodynamic performance. Active methods such as synthetic jets, plasma actuators, and pulsed blowing are examined for their ability to dynamically manipulate boundary layer behavior and delay or suppress …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–7 Read article
-
Effectiveness of Alcohol-Based Hand Rubs in Glove Hygiene: A Meta-Analysis and Systematic Review
Abstract: Introduction: Hand hygiene is crucial for preventing hospital-acquired infections, though gloves have been reported to curb the spread of infection, but they have their limitation. While recommended for specific procedures, they don't guarantee complete protection and frequent changes are resource limiting. This study investigates the potential of alcohol-based hand rubs (ABHR) for disinfecting gloves worn by healthcare workers (HCWs). Methodology: We conducted a meta-analysis searching six databases for studies on …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 16, Issue 1, 2026 · pp. 33–45 Read article
-
Dynamic Mechanical Analysis of Carbon Fiber Reinforced Polymer Composites
Abstract: This study investigates the thermal decomposition and mechanical properties of Fiber-Reinforced Polymer Composites (FRPCs) using Dynamic Mechanical Analysis (DMA). The research focuses on improving the recycling and recovery process of Carbon Fiber-Reinforced Polymers (CFRPs), addressing environmental concerns regarding their disposal. By analyzing the effects of different heating rates (5°C and 10°C per minute) and atmospheric conditions (nitrogen, oxygen, and a combination of both), the study identifies optimal parameters for maximizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 386–393 Read article
-
Design Conceptualization and Computational Analysis of Cryogenic Engine Nozzle-ABYOM
Abstract: The main purpose of this paper is to design a cryogenic engine nozzle with specified dimensions using CATIA V5 software and analyze the nozzle using ANSYS software. The realizable k-ε viscous model was used for calculation and the Hydrogen (H2) had retained as an ideal gas. The CFD simulations were done on the nozzle to find the pressure, density, velocity, and temperature. In the graph, there are 500 points streamlined …
Published in Journal of Materials & Metallurgical Engineering Read article
-
High-Velocity Impact Response of CFRP and Hybrid Composites: A Comprehensive Review on Ballistic Resistance and Damage Mechanisms
Abstract: This review consolidates recent advances in the study of high-velocity impact response of carbon fiber reinforced polymer and hybrid composites. Carbon fiber reinforced polymer composites are widely applied in aerospace, automotive, and defense due to their high strength-to-weight ratio, stiffness, and durability. However, their susceptibility to impact damage such as delamination, matrix cracking, and fiber breakage limits their performance under dynamic loading. To overcome these challenges, researchers have explored reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 100–122 Read article
-
A Systematic Review of Advanced Composite Materials for High-Performance Spur Gear Applications
Abstract: This is a review which provides specific and detailed information regarding the fiber-reinforced polymer (FRP) composite to replace traditional steel in high-performance spur gears with emphasis on mechanical performance, computational modeling, and experimental validation. Methods: The current literature was thoroughly investigated that includes material properties, material simulation (e.g., finite element analysis, FEA), and experimental gear testing procedures (e.g., DIN 51354, ASTM G99). Certain case studies in the aerospace and automotive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 209–220 Read article
-
Problems and Difficulties in the Additive Manufacturing of Composites with Carbon Fiber Reinforcement for Medical Application
Abstract: Amputation is more prevalent than one may think due to an accident, war, or disease. Prosthetics and associated orthotics have a combined global market value of $2.8 billion. Carbon fibre has found a market due to increased demand for foot prostheses. Fused deposition modeling (FDM) is a rapidly advancing three-dimensional (3D) printing technique. PEEK (polyether-ether-ketone) is a biocompatible, high-performance polymer that could potentially be utilised as an orthopedic surgery implant …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 8–12 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Enhancing Worker Comfort in High-Heat Environments: A Triangular Bladeless Cooling Fan Approach
Abstract: Workers in high-heat industrial environments frequently encounter thermal stress, fatigue, and dehydration, which significantly impact both productivity and safety. Existing cooling solutions such as pedestal fans, ceiling fans, and central air-cooling systems often fall short due to limited airflow reach, safety concerns from exposed blades, high energy consumption, and poor suitability for dynamic workshop layouts. To address these challenges, this study presents a novel triangular bladeless fan designed specifically for …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 25–31 Read article
-
A Study of The Performance of surface modified NACA 2416 Airfoils at various Angles of Attach at Re80000
Abstract: This study delves into the aerodynamic effects and characteristics of surface-modified NACA 2416 airfoils, placing a greater emphasis on the aerodynamic efficiency of a two-dimensional surface-modified NACA 2416 airfoil under subsonic flow conditions at Re=80000 and various angles of attack (AOAs). The surface-modified airfoils were crafted using CATIA V5, and simulations were conducted in ANSYS Fluent for angles of attack ranging from 0° to 12°.The CFD results encompass a broad …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 34–39 Read article
-
Comparative Environmental and Economic Assessment of Wind Turbine Blade Materials
Abstract: Wind energy has proven to be one of the most stable and non-polluting renewable energy sources to mass power production. For energy production wind turbine is an essential part of the wind power plant. The choice of the blade material and coating applied on it has a strong impact on aerodynamic performance, mechanical strength, fatigue life, manufacturing possibility, and environmental effects throughout the operating life of the turbine. Hence, authors …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 91–99 Read article
-
Design and Implementation of Lightweight Polymer-Based Drone System for Targeted Agricultural Spraying
Abstract: Agriculture has entered a new era of innovation, with drone technology emerging as a key tool in pesticide and fertilizer application. Unlike conventional methods that expose farmers to hazardous chemicals resulting in health issues such as skin disorders, neurological impairments, and in extreme cases, fatal illnesses drone-based spraying offers a safer and more efficient alternative. In India, the adoption of this technology is accelerating due to its ability to reduce …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 476–486 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
A New Design and CFD Analysis of UAV for Military and Other Applications
Abstract: The new era of unmanned aerial vehicles (UAV) started long back. The purpose of this project was to make a new innovative approach to the designing of UAVs for better use in the field of surveillance and commercial photography and videography. The UAV was designed in such a way that holds the camera connected to a wireless transmission system, this feeds the live information to the ground station. This UAV …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 181–187 Read article
-
Analysis of a Battery Pack Module for a Formula Student Car
Abstract: This research aims to evaluate the development of a high-voltage accumulator system that meets established standards of safety and operation. It examines key components, protocols, and techniques used in its creation while assessing performance in electronic cooling and structural integrity. Polymers, serving as electrical insulators and flame retarders, have found an interesting application in EV battery packs. This study focuses on polycarbonate materials' ability to withstand thermal and structural loads …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 320–339 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Development And Examination of a Composite Material Reinforced with Natural Bamboo Fiber
Abstract: This work provides a novel replacement for fiber-reinforced polymers (FRP) by integrating bamboo fibers into an epoxy matrix. Numerous studies are being conducted in this area to reach the intended standard. This composite exhibits a strong resemblance to synthetic fiber-based composites. This is mainly because to the benefits, which include low cost, biodegradable qualities, easy availability, non-toxicity, non-abrasiveness, and light weight. The representation used for the BFRP was a single …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 417–425 Read article
-
Bacteria on Salt Water Medium Evaluation: The Conceptual Impacts of Temperature
Abstract: The potential impact of temperature on bacteria on salt water medium for crude oil degradation in an aerated lagoon system was simulated using MATLAB Simulation software. The specific rate of bacteria obtained revealed maximum at temperature of less than 35oC with the order of 90 o C (11 cfu/ml) > 60 o C (40 cfu/ml) > 45 o C (35 cfu/ml) > 30 o C (28 cfu/ml). Most of the …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 16, Issue 1, 2026 Read article
-
The Integrity of Bio-Stimulant Efficiency of Mint Leaf (Mentha Piperita) on Crude Oil Remediation in Soil Environment
Abstract: This research addresses the integrity of biostimulant efficiency of mint leaf (Mentha piperita) on crude oil remediation in soil environments. The soil environment consideration in this investigation is loamy and some soil properties were examined; obtained data revealed a nitrogen value of 5.82%, phosphorus value of 46.91mg/kg, potassium value of 417.51mg/kg, and hydrogen-utilizing bacteria (HUB) value of 13.19cfu/g for unpolluted loamy soil, whereas polluted soil with crude oil data are …
Published in International Journal of Pollution: Prevention & Control · Vol. 4, Issue 1, 2026 · pp. 41–47 Read article