Search
75 articles for “CC”
-
Role of Clay Liners in Municipal Solid Waste Landfills: A Review
Abstract: Rapid population growth has significantly increased the generation of municipal solid waste (MSW) in urban and suburban regions. Disposal of MSW in landfills without proper liner systems may lead to leachate migration and subsequent contamination of groundwater and surrounding soils. The use of liner systems at the base of landfills is therefore essential to minimize leachate percolation and protect the environment. Geosynthetic clay liners (GCLs) and compacted clay liners (CCLs) …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 2, 2026 · pp. 50–56 Read article
-
Dielectric Studies of 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 Nanoceramic Fabricated by Chemo-mechanical Process
Abstract: The present investigation is aimed toward investigate a straightforward, inexpensive, and environmentally friendly chemo-mechanical method for preparing high-dielectric materials, specifically 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 (BCT-CCTO), by combining metal nitrate combustion with solid TiO2 powder and titanium isopropoxide, Ti (OR)4. The composite was prepared by the mixing of individual materials of Ba0.8Ca0.2TiO3 and CaCu3Ti4O12 through the chemo-mechanical method. Initially, 99% pure Ba (NO3)3, Cu (NO3)2∙3H2O, TiO2 and glycine were taken in their stoichiometry ratios. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–21 Read article
-
Comparison of Various Load Balancing Algorithms in Cloud Computing
Abstract: The components associated with distributed computing are customers, datacenter and appropriated server. One of the principal issuesin distributed computing isload adjusting. Adjusting the heap intends to circulate the outstanding task at hand among a few hubs uniformly so no single hub will be over- burden. Burden can be of any kind that is it very well may be CPU load, memory limit or system load. Right now, introduced a design …
Published in Recent Trends in Parallel Computing Read article
-
Breakup Fusion of 18O with 144Sm
Abstract: Excitation function measurements have been done for the evaporation residues populating in the system 18O+144Sm. For this purpose, the stacked foil activation technique has been used subsequently accompanied by offline γ-ray spectrometry. The analysis of the experimental cross section of three evaporation residues 158Tm(p3n), 157Tm(p4n), and 155Ho(ap2n) has been done in the light of theoretical code PACE-4. Current findings demonstrate that the experimental cross sections of evaporation residues formed via …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 53–59 Read article
-
A Review of IoT-enabled Smart Street Light Power Management Systems: Challenges and Opportunities
Abstract: In the contemporary world, people expect all their demands to be satisfied. To address this human desire, scientific and technological developments are accelerating. One important factor in the quick development of technology is the Internet of Things (IoT). The goal of smart led street lighting systems is to create and implement cutting-edge IOT developments for energy-saving street lighting. Automation of street lighting is the best way to reduce electrical power …
Published in International Journal of Solid State Innovations & Research · Vol. 1, Issue 1, 2023 · pp. 1–7 Read article
-
A Comparative Techno-economic Analysis of Hydrogen Production Processes from Locally Available Resources in Nigeria
Abstract: In this work we report result of techno-economic analyses of three hydrogen production pathways - Steam Methane Reforming (SMR), SMR with Carbon Capture (SMR+CC) and Proton Exchange Membrane electrolysis (PEM) – using integrated process-cost simulation-estimation methodologies. Process modeling and simulation is performed with Aspen Hysys® and Aspen Plus® (V10). Cost modeling and estimation is based on full lifecycle cost of production using the Levelized Cost of Hydrogen (LCOH) approach. Feedstock …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 1, 2024 · pp. 29–46 Read article
-
The Role of Automation in Modern Healthcare: Innovations and Impact.
Abstract: Automation technology encompasses a broad array of systems and tools designed to perform tasks with minimal human intervention, thereby increasing efficiency, reducing errors, and enhancing productivity. This study explores the core components of automation technology, including sensors, actuators, controllers, and software, and examines their applications across various industries. In manufacturing, automation leads to significant improvements in production speed and precision. In healthcare, it enhances patient care and operational efficiency. In …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 2, Issue 2, 2024 · pp. 1–9 Read article
-
Pharmacological evaluation of Hepatoprotective activity of Indian medicinal plants Cordia Myxa and Canscora diffusa on wistar albino rats
Abstract: Two plants (Cordia myxa and Canscora diffusa), which were claimed to possess hepatoprotective activity, were selected. The Selected plants were authenticated by an expert botanist. In the current study, herbal extraction involving solvents of decreasing polarity (petroleum ether, ethyl acetate, and hydroalcoholic) was used to extract bioactive compounds from the plants of Cordia Myxa and Canscora diffusa in polyherbal preparations. A phytochemical evaluation was performed, including an acute toxicity study …
Published in International Journal of Tropical Medicines · Vol. 2, Issue 1, 2025 · pp. 31–44 Read article
-
Carbon Capture Technologies: Innovations, Challenges, and Environmental Implication
Abstract: This review work provides a comprehensive overview of carbon capture and storage (CCS) technologies, their status, and future directions. It examines various capture methods, including pre-combustion, post-combustion, oxyfuel combustion, and direct air capture, as well as emerging and hybrid technologies such as metal-organic frameworks, ionic liquids, and microencapsulation. The study discusses the limits of current technologies and attempts to point out innovations needed to ameliorate these challenges. It also explores …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 15, Issue 1, 2025 · pp. 7–18 Read article
-
Comparative Analysis of Sustainable Materials in Road Construction: A Review
Abstract: The immediate need for sustainable infrastructure has driven research into new materials in road construction with the goal of reducing environmental degradation and enhancing resource efficiency. This review is a comparative analysis of four innovative technologies involving industrial and natural waste products: recycled aggregates from construction and demolition (C&D) waste, feldspar powder from lithium mining, stabilized dam sediments using eucalyptus ash, and calcium carbide residue (CCR) blended with dredged sludge. …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 93–98 Read article
-
The Decision of the Maximum Synchronous Torque During the Solar Array Deployment Using the Closed Cable Loop
Abstract: It was a long time since mankind explored and studied the universe, but the early-age power sources have not changed a lot over that period. Solar panels have been used long ago and are still in use today. However, their efficiency has improved considerably. Large and complicated solar arrays are now used instead of simply attaching the panels directly on the face of the satellite. A solar array is essential …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 37–49 Read article
-
Performance Evaluation of Eco-friendly Cutting Fluid in Machining Process—An Approach towards Environmentally Friendly Production
Abstract: The machining industry's evolving environmental consciousness has prompted a growing demand for cutting fluids devoid of chlorine and sulphur, thus fostering sustainable machining practices. This surge in demand is driven by mounting apprehensions over environmental contamination and worker safety. As the industry transitions to modern cutting fluids, it becomes imperative to comprehend their effectiveness and the optimal machine parameters required for their deployment in the turning process. In our current …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 149–160 Read article
-
Gene prioritization of colorectal cancer using computational approach
Abstract: Colorectal cancer (CRC) continues to be a major worldwide health issue, underscoring the need to pinpoint crucial genetic elements influencing its initiation and advancement. In this investigation, we utilize sophisticated computational methods to prioritize potential genes linked to CRC development. Through the utilization of various bioinformatics tools and comprehensive methodologies, we systematically examine extensive microarray datasets to identify potential genetic contributors. Initially, a vast amount of CRC microarray data (approximately …
Published in International Journal of Bioinformatics and Computational Biology · Vol. 2, Issue 1, 2024 · pp. 39–52 Read article
-
Influence of Center Cut Geometry and Power Law Index on the Free Vibration of Functionally Graded Shells
Abstract: This study explores the influence of power law variations and center cut geometries on the vibrational characteristics of functionally graded material (FGM) shells using finite element analysis (FEA). Stainless steel-alumina oxide (Al2O3) composites serve as the FGM, offering a unique blend of ceramic heat resistance and metallic toughness. Power law functions within APDL tailor material properties across the shell thickness. The research investigates vibrations under various boundary conditions (CCCC, CCFF, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 194–209 Read article
-
Sensor Guard: Thermal Sensor System for Lion Detection and Collision Prevention
Abstract: This paper presents a novel system that utilizes thermal imaging and CCTV cameras integrated with sensors to detect heat sources, specifically focusing on the detection of lions near railway tracks to prevent collisions. The system employs infrared thermal imaging to identify heat signatures of animals, particularly lions, that may create risk to his/her life. By combining thermal sensors and machine learning algorithms, the system is capable of accurately the heat …
Published in Recent Trends in Sensor Research & Technology · Vol. 12, Issue 1, 2025 · pp. 21–28 Read article
-
Carbon Sequestration in Mineralogy: Potential of Ultramafic Rocks for CO₂ Storage
Abstract: The increasing concentration of atmospheric carbon dioxide (CO₂) due to anthropogenic activities has necessitated the development of effective carbon sequestration strategies. Mineral carbonation, particularly utilizing ultramafic rocks, has emerged as a promising approach for long-term CO₂ storage. This review explores the potential of ultramafic rocks in sequestering CO₂, discussing their mineral composition, reaction mechanisms, advantages, and challenges associated with their utilization in carbon capture and storage (CCS). Additionally, advancements in …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 30–35 Read article
-
The Relationship between Presentation of Online Self and Conscientiousness in Emerging Adults in India
Abstract: With the rise of social media use, understanding how individuals curate their online presence and experiment with different aspects of their digital identity is crucial in determining whether their online self is an extension of their offline identity or a distinct construct. This necessitates an examination of personality traits, particularly conscientiousness, to explore its role in online self-expression. Existing research suggests that individuals with high conscientiousness tend to maintain consistency …
Published in International Journal of Behavioral Sciences · Vol. 2, Issue 2, 2025 · pp. 38–45 Read article
-
Current Controlled Oscillator Using FinFET
Abstract: A current-controlled oscillator using 18 nm FinFET technology is proposed in this study which consists of a Current Controlled Differential Difference Current Conveyor (CCDDCC) block to control the current. FinFET technology has better scalability and lower leakage current compared to traditional CMOS, which allows it to surpass the obstacles faced by CMOS-based oscillators. The suggested oscillator is suitable for electronic applications such as Phase-Locked Loop (PLL) systems, radio frequency (RF) …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 3, 2025 · pp. 17–28 Read article
-
Predicting Dielectric Constants of Polymers Using Molecular Structural Descriptors and Explainable Machine Learning: A Data-Driven Approach
Abstract: Accurate prediction of dielectric constants in polymeric materials is fundamental to the rational design of advanced electronic components, energy storage capacitors, flexible substrates, and high-frequency communication circuits. Conventional approaches to identifying suitable polymer dielectrics rely on extensive experimental synthesis and characterisation, which are both time-consuming and resource-intensive. In this work, an explainable machine learning framework is developed to predict the dielectric constant of polymers directly from molecular structural descriptors derived …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 297–304 Read article
-
Research Paper on Thermal Comfort Analysis of Tractor Considering Multi-Parameters
Abstract: The main functions of a vehicle cabin are to provide a comfortable and relaxing environment for its operator and to protect them from vibrations, noise, and other adverse influences. Modern agricultural tractor cabins are complicated, high-efficiency systems, and the goal of their development is to reduce their negative influence on the environment. Main factors for thermal comfort are the dry-bulb temperature, relative humidity, surrounding surface temperature, and air motion. A …
Published in Journal of Mechatronics and Automation Read article