Search
1508 articles for “surface”
-
Synthesis of Zinc Oxide Nanoparticles Through Polymeric Precursor Route and their Integration into Functional Nanocomposites
Abstract: A polymer precursor approach for creating zinc oxide (ZnO) nanoparticles with regulated size and shape is described in this work. By stabilising and capping particles, the polymer-assisted pathway efficiently reduces particle agglomeration while facilitating controlled nucleation and growth. The surface shape and dispersion of the produced ZnO nanoparticles were assessed using the scanning electron microscopy (SEM). When compared to traditional synthesis techniques, the addition of polymer greatly enhanced surface homogeneity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 883–890 Read article
-
Growth of Cu2O on TCO by SILAR method acts as an alternative buffer electrode layer towards the development of organic solar cell
Abstract: In many types of optoelectronic devices, layer of PEDOT: PSS is sandwiched between the indium-tin oxide (ITO) electrode and the active layer. Buffer PEDOT: PSS provides a well- defined work function which is higher than that of ITO (4.2eV), it smooths the ITO surface and so avoids shorts, and it also protects the active layer from ingress of indium or oxygen, leading to longer device lifetimes. The role of PEDOT: …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 20–27 Read article
-
Sustainable Carbon Materials for Catalysis, Energy Conversion, and Environmental Remediation
Abstract: Among the most ancient and adaptable materials used by humans, carbon finds use in a wide range of industries, including electronics, energy production, medicine, water purification, air filtration, and catalysis. Among them, activated carbon's highly developed microporous structure, remarkably large specific surface area, and adjustable surface functions have drawn a great deal of attention from both science and industry. Activated carbon materials have been widely used as molecular sieves, adsorbents …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 47–52 Read article
-
Anti-Soiling Coating Technologies for PV Panels Under Dust Storm Conditions
Abstract: Background: Deployment of photovoltaics (PV) in arid and semi-arid areas where there is ample sunlight has been increasing quickly because of their high solar irradiation. The rising number of dust storms, as well as depositing particulate matter into the air, has caused a significant decrease in energy production due to reduced transmittance of light through the surface of the PV panel from the dust on the panel’s surface. This has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 28–38 Read article
-
Interfacial Bonding Efficiency in Jute-Carbon Fiber Polyester Matrix Composites Evaluated Through Short-Beam Shear and Interlaminar Fracture Toughness Testing
Abstract: The natural Fiber–synthetic Fiber hybrid composites are jute–carbon Fiber hybrid in polyester matrix which could be used in semi-structural applications of automotive, construction and marine industry as an eco-friendly and cost-effective alternative of conventional carbon Fiber reinforced polymer. But the hydrophilic nature of jute Fibers and the relatively inert surface of carbon Fiber’s cause weak bonding at the interface of the polyester matrix, which causes premature delamination, poor interlaminar shear …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 68–80 Read article
-
A Comparative Study of the Structure–Property Relationships in CAD/CAM Milled vs. 3D-Printed High-Performance Polymers: Impact of Molecular Orientation on Abrasive-Wear Resistance
Abstract: Background: The transition from subtractive to additive manufacturing in prosthetic dentistry has introduced significant variations in the macromolecular architecture of high-performance polymers. While CAD/CAM milling utilizes high-density, industrially polymerized blocks, 3D printing (Additive Manufacturing) relies on layer-by-layer deposition, which may induce anisotropic molecular orientation. This retrospective study investigates how these distinct manufacturing “thermal histories” influence the long-term abrasive-wear resistance of PEEK and PEKK restorations. Materials and Methods: Data were retrospectively …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 133–140 Read article
-
Numerical and Experimental Investigation of AlHE30 for Rectangular Finned Cooking Vessel
Abstract: AbstractFins are basically extended surface, which is used to increase the heat transfer rate, this is basically a secondary surface mounted on primary surface to augment heat transfer from it. A numerical study using ANSYS were conducted to optimize fin shape based on base temperature and maximize the heat transfer across the cooking vessel. By investigating fin of (AlHE30) material were conducted experiments the fin of diameter 14 and 195 …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 28–36 Read article
-
Design Simulation and Analysis of Improved Anti Reflecting Coating for Reflection Loss Minimization of Solar Cell
Abstract: Antireflection coatings are made up of a thin layer of dielectric material with a specific thickness and refractive index that causes the wave reflected from the top surface of the antireflection coating to be out of phase with the wave reflected from the semiconductor surface due to interference effects in the coating. Anti-reflective coating design and modelling were utilised to improve the efficiency of solar cells. When integrated into arrays …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 3, 2021 · pp. 32–41 Read article
-
Natural Convection flow through Heated Vertical parallel plates
Abstract: This article presents the theoretical and experimental analysis of natural convection heat transfer through heated vertical parallel plates. Two vertical parallel plates are heated by providing electrical heating coils on the external surface of the plates maintaining uniform heat flux conditions at the wall. The length, width and thickness of each plate is 500 mm, 150 mm and 5 mm respectively. Outer surface is insulated and thus allowing the heat …
Published in Journal of Thermal Engineering and Applications · Vol. 9, Issue 1, 2022 · pp. 9–17 Read article
-
Experimental Investigations on the Durability of PMMA Microfluidic Devices Fabricated by Hot Embossing Lithography with Plasma Processing for Bioengineering Applications
Abstract: In this research paper, total 1290 individual static contact angles of different working liquids have been measured and recorded on the flat polymethylmethacrylate (PMMA) surfaces. Total 474 individual PMMA microfluidic devices have been fabricated by the maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory and mechanical engineering workshop to determine the durability of these microfluidic devices. Total nine individual working liquids have been used to …
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 3, 2016 · pp. 1–18 Read article
-
Wet Multi Plate Clutch Failure: A Review
Abstract: To create a successful design that satisfies modern demands, the traditional theoretical method of computing temperature area, in particular the maximum temperature considered inside the surfaces of the friction take hold of disc best during the single engagement, is used. The entire engagement time was 5s, although the temperature fields were calculated during 6 consecutive engagements. In order to calculate the heat conductivity of the friction grasp machine, a three-dimensional …
Published in Journal of Automobile Engineering and Applications · Vol. 10, Issue 1, 2023 · pp. 1–10 Read article
-
Comparative Adsorption Studies on Raw Rice Husk, Acid Leached Rice Husk and Base Leached Rice Husk by Using Methylene Blue as Dye
Abstract: Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use of raw rice husk (RRH), acid-leached rice husk (ALRH) and base-leached rice husk (BLRH) as adsorbents for decolorization. Characterization of raw rice was done by powder X-ray diffraction (P-XRD) analysis, surface area analysis and scanning electron microscopy. Raw rice husk was collected directly from …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 32–39 Read article
-
Organophilicization of Bentonite by HDTMA+ and TMPA+ Cations for Sorption of 2,4-Dichlorophenol (2,4-DCP) in Aqueous Solution
Abstract: Bentonite (Bt) was converted to organoclays by intercalation of cationic surfactants into its interlayer space. Two types of organoclays were synthesized from HDTMA and TMPA at 100% CEC, and the adsorbents were characterized by FTIR, XRD and SEM. The adsorption capacities of Bt and the organoclays for the removal of 2,4-dichlorophrnol (2,4-DCP) from aqueous solutions were tested under different conditions. Two adsorption isotherm models (Langmuir and Freundlich isotherms) were used …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 22–32 Read article
-
Investigation of Physical Characteristics and Machining Parameters of Improved Al-SiC MMC Using Dry EDM Process for Aerospace Industries
Abstract: Aluminium-based composite is widely used in aerospace and automobile industries because it is lighter in weight; but the trouble is that it is easily worn-out and life of the components is decreased. To overcome these problems, aluminium silicon carbide composite material has been developed with good wear-resistance, hardness and lighter weight. Silicon carbide has good mechanical properties like wear resistance, hardness, toughness and high melting point. Silicon carbide weight fractions …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 1, 2018 · pp. 15–32 Read article
-
Rocker Bogie System using RF Communication
Abstract: AbstractThe rocker-bogie system is a robot that can travel in rough terrain. Its mechanism helps in maintaining stability. It is a multispecialty robot that can be used for various applications. The use of Rocker-Bogie mechanism helps in maintaining the balance of the robot which is used to travel on an uneven surface, usually called as an All-Terrain Vehicular Robot. The conditions preferably needed for the robot to work are in …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 2, 2019 · pp. 22–29 Read article
-
Geotechnical study of a landslide reactivation in clay soils (central Piedmont, NW Italy).
Abstract: In March 2015, exceptional meteoric events occurred in southern Piedmont caused a remarkable rise of the rivers water level of the Tanaro Basin with flooding and many landslides. The engineering geological study reported here, concerns a triggering of a previous landslide occurred in 1982 in the hills, shaped in the marine sedimentary succession (Lugagnano Clay, lower Pliocene) of the southern Asti Reliefs, near San Martino Alfieri village. Detailed geological, morphological …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 1, 2020 · pp. 21–36 Read article
-
Effect of Improvement of Collapsible Soils with Bitumen Emulsions on Collapsibility Rate for Varying Degrees of Saturation
Abstract: Collapsible soils are one of many problematic soils in Iraq. Many foundation failure problems that occurred in Iraq are associated with percolation of water; the change in the degree of saturation can affect the stability of these soils and may encounter large volumetric change. A series of tests conducted on collapsible soil using oedometer apparatus and the settlement–time curves are determined accurately, then each test is determined to a different …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 1, 2016 · pp. 63–74 Read article
-
Evaluation of J-Integral and Fatigue Crack Growth Rate of Semi-elliptical Crack in Compressor Blade
Abstract: Gas turbine compressor blades are subjected to centrifugal, gas bending and vibratory loads. This repeated loading and unloading can reduce the life of compressor blades. This research aims at the estimation of fatigue crack growth rate of various three-dimensional cracks in a compressor blade considering the J-integral calculations for a semi-elliptical crack, subjected to centrifugal loading. Static stress analysis was carried out to ascertain the critical region or crack zone …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 2, 2014 · pp. 39–46 Read article
-
Short Review on the Probability of Carbon Nanotube Based Nanofluidics in Fluid Mechanics
Abstract: In this short review, author has briefly introduced the subject named as nanofluidics. Also, author has provided a short review on passive (surface-driven) capillary flow related to microfluidics. The effects of channel aspect ratio, surface wettability, liquid viscosity, effective viscosity, centrifugal force, and bend angle, are described to control the passive capillary flow in microfluidic devices and systems. Author has demonstrated the difference between leaky-device and non-leaky device in microfluidics. …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 3, 2020 · pp. 14–17 Read article
-
Laser ablation to secure electronic fabrication
Abstract: This article is study of laser pulse treat of matter to produce nano-materials. Nano-particulated formation of semiconducting metalloids has showed optoelectronic sensibility to scheme eco-friendly production from Si and Ge. Of various techniques of nano-fabrication principles laser ablation has been as such production of stable, otherwise decisive scope has spelt to involve ligand as well. Liquid prohibitive laser ablation has scoped production of nano-in-meso-matter when bulk material has ablated underneath …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 2, 2021 · pp. 9–15 Read article