Search
472 articles for “Load Condition.”
-
Analysis of RC Frames Using Different Bracing Systems in Different Positions and Zones
Abstract: Structures are mainly built to enhance the performance of several activities like recreation, transportation, power generation, etc. They are built to sustain the loads coming on them during their service life by carrying adequate strength and also limit the deformation by possessing enough stiffness. Strength of a structure depends mainly upon the characteristics of material with which it is constructed. Stiffness is dependent upon the cross-sectional and geometrical properties of …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 1, 2016 · pp. 16–27 Read article
-
Response Study of High Rise Building under Wind Load
Abstract: Wind is a phenomenon of great complexity because of the many flow situations arising from the interaction of wind with structures. Wind is of the most significant forces of nature that must be considered in design of buildings. The characteristics of wind-induced loads on buildings continuously vary in temporal and spatial dimensions. Adequate design of buildings depends on the success in predicting the actual effects of turbulent wind forces to …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 35–45 Read article
-
Study on the Bio-kinetic Coefficients of Kitchen Effluent using UASB Reactor
Abstract: The upflow anaerobic sludge bed (UASB) reactor was operated at optimum organic loading rate (OLR) of 2.4 kg-COD/m3-day, with hydraulic detention time (HDT) of 10–12 h during the study. It was concluded from the study that the treatment of high-ranged kitchen mill effluent is technically feasible provided that the pH of the system is kept near to neutral. This can be achieved by adding NaHCO3 to the feed solution. The …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 1, 2015 · pp. 14–18 Read article
-
Synthesis and Evaluation of MgO-Supported Activated Carbon for Carbon dioxide Capture
Abstract: Carbon dioxide (CO₂) capture has emerged as a critical strategy for mitigating greenhouse gas emissions and addressing global climate change. In this study, a series of MgO-supported activated carbon adsorbents containing 2, 4, 6, 8, and 10 wt% MgO were successfully synthesized using the impregnation method to evaluate their CO₂ adsorption performance. The structural, chemical, and surface properties of the prepared materials were characterized using powder X-ray diffraction (PXRD), Fourier-transform …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 3, 2026 · pp. 53–57 Read article
-
Automation of 1.5tr Air Conditioning Systems Used in Different Cabins in Different Areas
Abstract: India is the world's most populous country and temperatures in many states regularly exceed 40°C. Therefore, people living in humid climates need a means to control temperature. Scientists have determined that human comfort is between 22°C and 27°C. This research determines all the properties of air relevant to the operation of water pipes. Exploring automation in air conditioning systems with Passive Infrared Sensor is to develop and implement intelligent climate …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 1, 2024 · pp. 1–8 Read article
-
Poisson’s Ratio in Stone Dust and Steel Fiber Reinforced Composite Concrete: A Theoretical Approach
Abstract: Poisson's ratio characterizes a material's deformation under load, offering insights into its structural behavior. Yet, there's a lack of research on SDSFC's Poisson's ratio, hindering its widespread adoption. This study aims to fill this gap by investigating SDSFC's Poisson's ratio under various curing conditions and material compositions. By analyzing how curing methods and material components influence Poisson's ratio, we can better comprehend SDSFC's behavior under different circumstances. Additionally, we'll explore …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 88–94 Read article
-
Advancing Pavement Durability and Sustainability through Glass Fiber Reinforced Concrete Technology
Abstract: This research evaluates the application of Glass Fiber Reinforced Concrete (GFRC) for improving road pavement durability and sustainability. The primary objective was to ascertain the optimal glass fiber content that enhances pavement performance while maintaining economic feasibility. To achieve this, experimental investigations compared the mechanical properties of GFRC to traditional Portland Cement Concrete (PCC). The experiments focused on key performance metrics such as tensile, compressive, and flexural strengths, with GFRC …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 760–774 Read article
-
Bio-removal of Cr (VI) from tannery wastewater using Saccharomyces cerevisiae
Abstract: Chrome tanning is the most and widely used types of tanning process and the wastewater generated by these industries is a major source of chromium pollution in the form of Cr (III) & Cr(VI) and become a cause for many human health problems. Several researchers have published papers to find the solution for removal of Cr (VI) but at its low concentration and this research work investigates at high concentration …
Published in Emerging Trends in Chemical Engineering · Vol. 7, Issue 1, 2020 · pp. 29–39 Read article
-
Identifying Risk Consequences Affecting Berth Construction Projects
Abstract: Construction project is a complex system which has several characteristics such as specific objectives, time limit, financial constraints and economic requirements, organizational and legal conditions, complexity and systematic characteristics. Many construction companies working in the port and harbor projects are facing several issues during the construction period and influence complicated relations which include direct, indirect, obvious and unpredictable. Berth is a ship platform used for loading and unloading of cargo …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 1, 2016 · pp. 57–60 Read article
-
Applicability of a Balcony Function for Bridge Deck Analysis under HA and HB Loading
Abstract: A bridge is one of the major infrastructures in the society used to connect roads separated by rivers or any other obstructions. This work is all about the applicability of a balcony function for bridge deck analysis under HA loading and HB loading. The HA loading comprises of uniformly distributed load and knife edge load while HB comprises of abnormal load which is as a result of abnormal vehicles. Different …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 12–22 Read article
-
Fabrication, Interfacial Characterization, and Superparamagnetic Properties of Fe₃O₄@γ-Fe₂O₃ Core/Shell Nanoparticle-Reinforced Chitosan Biopolymer Composites
Abstract: Magnetite/maghemite core/shell nanoparticles were prepared by alkaline co-precipitation of Fe(II) and Fe(III) precursors followed by controlled thermal oxidation at 350 °C and subsequently incorporated into chitosan at 1, 3, and 5 wt% loadings by solution casting. The resulting films were evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), high-resolution transmission electron microscopy (HR-TEM), vibrating-sample magnetometry (VSM), thermogravimetric analysis (TGA), and tensile testing. XRD showed the characteristic cubic spinel reflections …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
A Review on Predicting Wear and Friction of PTFE Composites - Fillers to Machine Learning Models
Abstract: Polytetrafluoroethylene (PTFE) composites, a self-lubricating material with low friction, became an indispensable material in engineering applications where load carrying capacity and wear are crucial. The pure PTFE has poor mechanical strength and wear resistance which can be enhanced by the addition of fillers in appropriate volume fraction. The wear performance is dependent on various factors such as fillers, operating parameters, environmental conditions as well as manufacturing attributes. This makes the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 114–128 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Modelling, Simulation & Optimization of Renewable Energy-Based Hybrid Microgrid for Electrification of Rural Areas
Abstract: Rural electrification in India faces persistent challenges due to unreliable grid connectivity, elevated transmission and distribution costs, and the geographical isolation of remote communities. Insufficient access to reliable electricity constrains economic development, educational opportunities, healthcare delivery, and overall quality of life in these areas. This study details the design and simulation of an off-grid, renewable-based hybrid micro grid for two rural villages: Khirgitola in Chhattisgarh, which has an electrification rate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1206–1218 Read article
-
Comparative CFD Analysis of Major and Minor Aerodynamic Modifications for Tall Building Shapes under Wind Loading
Abstract: Aerodynamic performance of tall buildings is significant to structural safety and serviceability under wind. The major and minor aerodynamic changes of the tall building shape are compared with the computational fluid dynamics (CFD) simulation. The base model was a rectangle of 75 m × 75 m × 300 m. Various aerodynamic modifications of shapes were examined: circular, elliptical, tapered, twisted, rounded-corner, and chamfered-corner shapes. Simulations were carried out in the …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 2, 2026 · pp. 9–35 Read article
-
Quasi-Static Thermal Stress Analysis in a Thin Circular Cylinder Due To Internal Heat Generation Under Transient Temperature Conditions
Abstract: This paper is concerned with inverse quasi-static thermal stress analysis in a thin circular cylinder due to internal heat generation under transient temperature conditions. The internal heat generation is modeled as a cylindrical surface heat source located in the annular region along the axial length of the cylinder. This source is placed concentrically inside the cylinder and begins releasing heat spontaneously at a specific point in time. The thin circular …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 2, 2025 · pp. 17–28 Read article
-
Piezo in Implant Surgery: A Literature Review
Abstract: Dental Implants are Titanium cylinders that are widely used by dentists as prosthesis to replace damaged or lost tooth. The process where the implant locks and attaches itself with the bone is termed as osseointegration. Factors like bone quality and quantity, primary stability of implant, surface characteristics of implant are some of the factors that determine osseointegration of the implant.Acceleration of osseointegration may depend on the removal of negative tissue …
Published in Research and Reviews: A Journal of Dentistry · Vol. 14, Issue 2, 2023 · pp. 17–20 Read article
-
Modelling and Analysis of Morphing Wing Structure for Variable Camber
Abstract: This study explores the modelling and analysis of a morphing wing with variable camber configurations to observe its aerodynamic characteristics compared to conventional form. The morphing wing is the concept where the shape of the wing is altered mid-flight based on different phases of flight to improve its aerodynamic characteristics. Morphing wing structure designs such as the corrugated and FISHBAC designs were considered for this analysis. The NACA 2412 airfoil …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 209–224 Read article
-
Polymer Matrix-Based High-Performance Thermoplastic Composites for Automotive Applications: Design, Characterization, and Interface Behavior
Abstract: The study emphasizes the role of high-performance thermoplastic polymer matrices such as PEEK, PPS, and PA6, selected for their superior thermal stability, mechanical strength, and recyclability in automotive environments. The expanded usage of electric vehicles (EVs) and self-driving transportation creates a demand for advanced materials which are weight-conscious yet high in strength relative to their weight, impact-resistant yet still being environmentally friendly. This study aims to create and define fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 216–237 Read article
-
Tailoring the Compressive Behavior of Tetrachiral Auxetic Structures Through FDM Process-Parameters
Abstract: This research evaluates how fused deposition modeling (FDM) fabrication process parameters affect the compressive behavior of tetrachiral auxetic structures created from Polylactic Acid (PLA). Auxetic materials have several useful properties, including reversible deformation and high-energy absorbing capabilities, which are beneficial to creating ultra-lightweight structural, protective, and shock-resistance designs. Among the available auxetic topologies, the tetrachiral configuration is particularly attractive for engineering use, because its rotation-dominated node–ligament deformation gives a negative …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 58–70 Read article