Search
1948 articles for “and yielded a damage-estimation R² of 0.946” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Continuous Thoracic Epidural Infusion: A Comparative Study of Fentanyl and Ropivacaine V/S Fentanyl and Bupivacaine in Upper Abdominal Surgery for Postoperative Analgesia
Abstract: To measure and compare the efficacy of analgesia with the both techniques with measurement of changes in hemodynamics, respiratory rate, and SPO2 with the two techniques and to compare their side effects and evaluate the patient’s satisfaction. The random selection of patients was allocated in two groups. Each group consist of 25ASA group I–II patients. Infusion was given at the rate of 0.1 ml/kg/h. Group RF: continuous thoracic epidural infusion …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 3, Issue 2, 2014 · pp. 1–10 Read article
-
Evaluation of the Effect of Zinc Supplementation on Glycemic Control and Lipid Profile in Normoglycemic and Streptozotocin-induced Type-2 Diabetic Rats
Abstract: Diabetes mellitus is a chronic, progressive disease, which is accompanied by multiple complications. Hyperglycemia and dyslipidemia are common complications of diabetes mellitus. The current approaches for treatment of diabetes are mostly dependent on insulin and other oral standard drugs, which have their own put falls. Thus, micronutrients supplementation is gaining momentum as the quest for management of diabetes continues. Certain micronutrients increase insulin synthesis secretion and insulin sensitivity thereby improve …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 5, Issue 2, 2016 · pp. 41–51 Read article
-
Women’s Satisfaction with Care Providers Interaction and Associated Factors among Pregnant Women Attending Antenatal Clinic in Tiyo District, Arsi Zone, Ethiopia, 2016: Institutional Based Cross-Sectional Study
Abstract: Background: Health care provider-client interaction during antenatal care is an effective strategy to improve maternal health care seeking behavior. When clients are informed and involved in decision making, they are more adherent to medical recommendation and carry out more health related behavioral changes. However, the unsatisfactory interaction between health care providers and women pose a significant challenge in the health care service utilization.Objective: This study is aimed to assess women’s …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 6, Issue 1, 2017 · pp. 30–38 Read article
-
Therapeutic Treatment of Acute Inflammatory Demyelinating Polyneuropathy: Single Case Report
Abstract: Background: Guillain-Barré syndrome is an acute inflammatory demyelinating poly-radiculoneuropathy (AIDP) characterized by weakness and a reflexia, typically. The cause of AIDP is still unknown, with suspicions of viral or bacterial infection preceding diagnosis. It can affect people of all ages, gender, or ethnic background, with equal incidence rate in both men and women. The incidence rate for AIDP is rare, affecting 1–2 people in 100,000 annually. Acute Inflammatory Demyelinating Poly-radiculoneuropathy …
Published in Research and Reviews: A Journal of Neuroscience · Vol. 9, Issue 1, 2019 · pp. 13–18 Read article
-
Assessment of Modern Contraceptive Utilization and Factors Associated Among Married Women of Reproductive Age Group at Mekelle City, North Ethiopia in August 2013
Abstract: Ethiopia is the second most populous nation in Africa. Its population has increased nearly seven times from 11.8 million at the beginning of the 20th century to about 80 million today. Where, only 27% in reproductive age groups are currently using modern contraceptive and number of factors could affect for effective use of modern contraception. But, still evidence showed that, as there is high maternal mortality and unwanted pregnancy. However, …
Published in Research and Reviews: A Journal of Neuroscience · Vol. 5, Issue 2, 2015 · pp. 1–23 Read article
-
Effect of Jawarish Zarooni and Sharbat Buzoori in a Diagnosed Case of Nephrotic Syndrome
Abstract: Nephrotic syndrome is a manifestation of kidney disease involving the glomeruli, characterized by oedema, proteinuria, hyperlipidemia and low serum albumin. It may be caused by primary kidney disease such as focal segmental glomerulosclerosis, and mutations in the podocin gene (shown in familial and sporadic forms of steroid-resistant nephrotic syndrome). A study by Michael B. Rothenberg and Walter Heymann M. showed 5-year survey of the incidence of the nephrotic syndrome in …
Published in Research and Reviews : Journal of Surgery · Vol. 9, Issue 1, 2020 · pp. 33–35 Read article
-
Evaluation of Marine Waste Water And Aromatic Hydrocarbons Toxicity Using A Battery of Assays
Abstract: Abstract The aim of this study is to evaluate the toxic effects of marine wastewater and representative aromatic hydrocarbons using a battery of assays. The methods employed for the toxicological evaluation involve physic-chemical analysis of the marine wastewater, toxi-chromo test using mutant E coli and sub-chronic animal toxicity testing with emphasis on body weight determination, biochemical indices and histopathological examination. The results showed that Nembe water side wastewater sample contain …
Published in Research and Reviews: A Journal of Toxicology · Vol. 10, Issue 2, 2020 · pp. 1–13 Read article
-
Cadmium Accumulation in Different Tissues and DNA Content Alteration in Cat Fish (Clarias batrachus) Exposed to Lethal Concentration of Cadmium
Abstract: In the present study, the acute toxicity experiment was conducted to evaluate LC50 of Cadmium chloride (CdCl2) on Clarias batrachus which was found to be 450 ppm for 96 h. Clarias batrachus (average length of 8.5 ± 0.4 cm and the average weight of 13.5 ± 0.393 g) was exposed to sub-lethal concentration (140 ppm) and lethal (450 ppm) concentrations of Cd for 14 days. The Cd accumulation in tissues …
Published in Research and Reviews: A Journal of Toxicology · Vol. 10, Issue 3, 2020 · pp. 1–8 Read article
-
Structure–Property-Guided Polymer–Metal Hybrid Design of a Wall Plastering Spray Assembly
Abstract: Wall plastering spray equipment requires a combination of low mass, dimensional stability, abrasion resistance, chemical compatibility with cementitious mortar, and comfortable operator interaction. The original assembly was primarily developed as a metallic mechanical system; however, a polymer-focused material architecture can reduce non-load-bearing mass while retaining a safe metallic pressure path. This study, therefore, presents a structure–property-guided polymer–metal hybrid design in which the pressure housing and nozzle insert remain metallic, whereas …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 197–211 Read article
-
Systematic Hydroponic Review and Cultivation Strategies for Bacopa Monnieri
Abstract: Bacopa monnieri (L.) Wettst. (Brahmi; Plantaginaceae) is a medicinally important herb whose nootropic, antioxidant and anti-inflammatory properties derive largely from a group of triterpenoid saponins known as bacosides. Rising global demand for such compounds has made reliable, high-yield production a research priority and has prompted a search for cultivation systems superior to conventional field cultivation. This review compares field cultivation, in vitro micropropagation, bioreactor culture, hydroponics and elicitation for their …
Published in International Journal of Trends in Horticulture · Vol. 3, Issue 2, 2026 · pp. 23–28 Read article
-
Assessment of Groundwater Quality in Rumuodara, Rivers State, Nigeria
Abstract: The assessment of groundwater quality from selected borehole in Rumuodara, Rivers State, Nigeria was evaluated. The results of the physicochemical parameters revealed that pH ranged from 6.57-6.60, temperature: 26.10-28.54oC, turbidity: 1.57-2.96NTU, conductivity: 41.24-68.44 μS/cm, salinity: 26.10-50.37mg/l, total dissolved solid: 18.9-63.14mg/l, total hardness: 38.21-48.30mg/l, alkalinity: 55.30-70.17mg/l, chloride: 28.40-75.14mg/l, sulphate: 21.50-30.60mg/l, nitrate: 1.50-3.04mg/l, phosphate: 59.24-65.40mg/l, calcium: 37.81-45.27mg/l, Iron: 0.133-0.190mg/l, sodium: 16.70- 21.13mg/l, copper: 0.22–0.50mg/l, total suspended solid: 2.94-3.60mg/l, Lead: < 0.01mg/l-2.27mg/l, zinc: …
Published in Research & Reviews : Journal of Ecology Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
Physicochemical Analysis of Groundwater Quality In Owerri Municipal, Imo State, Nigeria Using MATLAB and ANN Models.
Abstract: The physicochemical analysis of groundwater quality in Owerri Municipal council, Imo state, Nigeria was carried out. Fifteen water samples were randomly selected from the five villages that make up Owerri municipal council were anlayzed for physicochemical parameters using standard methods. The results from the study area showed that the temperature ranged between 26.5-28.0oC; рH ranged between 4.80-5.32. Electrical conductivity ranged between 77-166 µЅ/cm. The total dissolved solids were between 35.4-168.4mg/l; …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 1, 2024 Read article
-
Predictive Modeling and Optimization of Tensile and Flexural Strength in FDM 3D Printing Using Decision Trees and Bayesian Optimization.
Abstract: This research investigates predictive modelling and optimization technique for the tensile and flexural strength of PlA (Poly Lactic Acid) in Fused Deposition Modelling (FDM) 3D printing. Employing Decision Trees and Bayesian Optimization enhances comprehension and control of 3D printing process. Precise model predicts PLA material properties based on input parameters. Methodology involves rigorous data preprocessing, encompassing, cleaning, transformation, and normalization. Hyperparameter optimization via grid search systematically explores configurations, optimizing model …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 203–214 Read article
-
Lower Genital Tract Infections in Pregnant Women: Epidemiology and Risk Factors Associated in Dakar, Senegal
Abstract: Vaginal infections are responsible for many problems in women of childbearing age and significantly influence pregnancy outcomes. This study sought to ascertain the prevalence of lower genital tract infections and the risk factors associated with them in pregnant women under observation at the Nabil Choucair Health Centre in Dakar, Senegal. This nine-month cross-sectional study, which involved women between 34 and 38 weeks gestation (WG), was carried out from July 2020 …
Published in Recent Trends in Infectious Diseases · Vol. 1, Issue 2, 2024 · pp. 47–59 Read article
-
Crystallinity of commercial carbon fibers from X-ray diffraction (XRD) studies
Abstract: Sized carbon fibers have commercial significance. Such carbon fibers serves has excellent reinforcing material with the polymer resin filler matrix leading to the formation of carbon fiber reinforced composites (CFRCs). Polarized carbon fibers find applications in the realms of health, energy, environment, defence, catalysis and smart materials. For brevities sake, the focus of the current research paper is only on the structural characterization of carbon fibers using XRD. The structure …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 1, 2023 · pp. 17–27 Read article
-
Effectiveness of Deep Breathing Exercise on Respiratory Parameters Among Post Extubated Patients Admitted in ICUs
Abstract: Introduction: Deep breathing exercises may be used to restore lung oxygenation ventilation function and are anticipated to enhance respiratory parameters. Aim: This study was done to examine the effectiveness of deep breathing exercise on respiratory parameters among post extubated patients. Methodology: A quasi experimental (pre-test, post-test control group) with quantitative approach study was conducted to assess the effect of deep breathing exercise on respiratory parameters among 30 post extubated patients …
Published in Research and Reviews: A Journal of Health Professions · Vol. 14, Issue 2, 2024 · pp. 25–31 Read article
-
Evaluating the Effect of NPSB Fertilizers on Barely (Hordeum vulgare L.) Production and Productivity at Tocha Woreda, Southwest Ethiopia.
Abstract: A number of blended fertilizers (BFs) were formulated and introduced but site and crop specific rate was not identified. A research was conducted in Tocha woreda to evaluate the rate of NPSB fertilizer to improve barely yield during main cropping season of 2019 and 2020. The experiment consists of seven treatment such as control(0) , recommended NP (69kg N and 20kg P), NPSB: 18.9-37.7-6.95-0.1 (100kg NPSB), NPSB: 41.9-37.7-6.95-0.1(100kg NPSB + …
Published in Research & Reviews : Journal of Botany · Vol. 13, Issue 3, 2024 · pp. 39–45 Read article
-
Microwave-Assisted Synthesis of Li₃Ba₂Gd₃(MoO₄)₈ Phosphors Doped with Pr³⁺ and Sm³⁺ for High-Performance Red Emission in LED Applications
Abstract: In this study, we report the successful synthesis of Li₃Ba₂Gd₃(MoO₄)₈ (RE³⁺ = Pr³⁺, Sm³⁺) phosphors using a novel, microwave-assisted solid-state reaction method at ambient temperature. The synthesis involved the use of analytical grade reagents including Lithium Nitrate (LiNO₃), Barium Nitrate, Gadolinium Nitrate (Gd(NO₃)₃·6H₂O), Ammonium Molybdate ((NH₄)₆Mo₇O₂₄·24H₂O), and high-purity oxides of Praseodymium (Pr₂O₃) and Samarium (Sm₂O₃). The reagents were mixed in stoichiometric ratios, ground thoroughly in a pestle and mortar, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 18–32 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article