Search
347 articles for “thermal effects”
-
Enhanced Heat Transfer in Double Pipe Heat Exchanger with Circular Fins Using Copper Nanofluid and Twisted Tape Inserts: A Computational Study
Abstract: The enhancement of convective heat transfer in a double-pipe heat exchanger utilizing circular finned twisted tape inserts and helical screw-tapes with centre rods, in conjunction with copper oxide nanofluid as the heat transfer medium was studied in this project. Computational Fluid Dynamics (CFD) simulations were conducted across Reynolds numbers ranging from 500 to 5000 to analyse heat transfer characteristics. The investigation focuses on Nusselt number improvement and friction factor analysis …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 11–22 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Sustainable Architecture for Rural Communities: The Tanzanian Family House Model
Abstract: Sustainable rural housing in East Africa must respond simultaneously to climatic stress, water scarcity, sanitation challenges, and socio-cultural practices. This article presents the Tanzanian Family House as a climate-responsive and resource-efficient housing model developed specifically for rural Tanzanian communities. The project integrates low embodied energy materials, passive environmental strategies, and decentralized infrastructure systems to create a durable and culturally grounded dwelling that can be constructed using local skills and materials. …
Published in International Journal of Rural and Regional Development · Vol. 4, Issue 1, 2026 · pp. 1–12 Read article
-
Fabrication and Testing of Advanced Concrete Made with Carbonized Bio Waste Available Locally: Special Consideration of Waste from Rajasthan
Abstract: In today's world, the construction sector must contend with a number of challenges on account of factors such as increasing urbanization and diminishing natural resources. More ecologically friendly building materials are being produced by industry as a result of increased awareness of the effects of climate change. Among other possible substitutes, rice husk ash (RHA), sugarcane bagasse ash (SCBA), and bamboo leaf ash (BLA) are already being used in the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 571–581 Read article
-
Development and Fabrication of Biohydrogel for Targeted Delivery of Delafloxacin for Bacterial Skin Infections
Abstract: The escalating challenge of bacterial resistance necessitates innovative drug delivery systems to enhance the efficacy of antibiotics. This study focuses on the development and optimization of a biohydrogel formulation for the targeted delivery of Delafloxacin, aiming to improve its therapeutic outcomes against resistant bacterial strains. Utilizing a 3² factorial design, biohydrogel formulations incorporating Poly(N-isopropylacrylamide) (PNIPAM) and Genipin were synthesized. The optimization process was guided by Design Expert software, focusing on …
Published in Research & Reviews: A Journal of Drug Design & Discovery Read article
-
Evaluating the Performance of Mobile Air Compressor Component of Radiator Unit using the Application of Reliability
Abstract: The application of reliability to monitor and predict the performance of mobile air compressor component of radiator unit was considered in this research. This study demonstrated some of the root causes of the radiator unit failure as effect of temperature and the nature of coolers used, because these two parameters cause corrosion, affect shortage on fluid level and in turn influence the internal heat generated by radiator unit of the …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 1, 2023 · pp. 39–43 Read article
-
Selection of Appropriate Porous Material for Designing and Developing Hybrid Absorptive Muffler: A Wave 1-D Based Approach
Abstract: In this study, glass wool and rock wool are used as sound-absorbing materials to assess the sound transmission loss (STL) of hybrid absorptive mufflers. Improving the muffler's acoustic performance and assessing how well these materials attenuate noise are the main goals. Rock wool, which offers greater thermal resistance and broader frequency absorption, is contrasted with glass wool, which is renowned for its lightweight construction and high-frequency absorption. Wave 1-D simulation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 148–160 Read article
-
Heat Stress Mitigation in Resource-Constrained Dairy Farming Systems: Practical Strategies for Sustainable Development
Abstract: Heat stress poses a critical threat to dairy production, particularly in resource-constrained systems prevalent across tropical and subtropical regions. Elevated ambient temperatures, compounded by high humidity, directly impair feed intake, milk yield, reproductive efficiency, and overall animal welfare. In low-resource settings, conventional cooling technologies such as automated fans, sprinklers, and climate-controlled housing remain economically inaccessible. Therefore, cost-effective, locally adaptable, and sustainable solutions are essential for maintaining productivity and animal health. …
Published in International Journal of Climate Conditions · Vol. 2, Issue 2, 2025 · pp. 1–12 Read article
-
Catalytic Performance Improvement in Polymer Derived Nanostructures for Fuel Cell Applications
Abstract: The performance and operational lifetime of PEMFCs are closely linked to the catalytic activity and durability of cathode electrocatalysts. In this research, a polymer-derived cobalt–iron nitrogen-doped carbon (CoFe–N/C) nanostructured catalyst is developed to enhance the ORR performance for PEMFC applications. PAN and melamine serve as nitrogen-rich polymer precursors, while cobalt and iron salts generate highly dispersed metal–nitrogen active sites within a porous carbon matrix through thermal treatment at 900 °C. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 968–979 Read article
-
Fabrication and Characterization of Almond Skin Powder Reinforced PLA Based Composite Filaments for Fused Filament Fabrication
Abstract: Researchers around the globe are increasingly utilizing recycling methods to address waste generated from polymers, spurred by the dire need to deal with environmental challenges promoting sustainable practices. Polymers are having highly-stable long-chain polymer structure which makes it difficult to degrade easily posing many environmental and health challenges, hence, recycling of the polymers is the sole method to mitigate harmful effects. However, there has been relatively little focus on producing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 530–539 Read article
-
Electro Less Duplex Nickel Coating and Tribological Characterization Under Elevated Temperature
Abstract: Electroless Ni-P (EN) coatings had previously demonstrated their ability to improve the tribological properties of the underlying substantial. This is due to its high hardness, fatigue strength, and chemical resistance. Nevertheless, the EN coverings' effectiveness at high temperatures, as well as their heat resistance, have yet to be evaluated. The current work investigates the tribological properties, namely friction and wear, of EN coatings at increased temperatures (100 ºC, 200 ºC, …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 1, 2023 · pp. 12–17 Read article
-
Remote Controlled Boat for Water Pollution Monitoring
Abstract: The global issue of water quality degradation caused by pollution has become a critical environmental concern. Leaving water unchecked for an extended period make it unfit for human needs and eradicate the entire water ecosystem. Water being considered as a vital element in sustaining living things need to be protected. To address this challenge, novel technological solutions are being devised to effectively monitor and manage water resources. This study introduces …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 1, 2024 · pp. 34–43 Read article
-
Marine Algal Fiber Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Autonomous Drones for Search and Rescue Opera-tions: State of the Art and Future Prospects
Abstract: Autonomous drones have significantly transformed search and rescue (SAR) operations by improving the speed, precision, and overall effectiveness with which rescuers are able to locate and provide assistance to individuals in need. By leveraging state-of-the-art technologies such as computer vision, artificial intelligence (AI), machine learning, and advanced navigation systems, drones have proven invaluable in carrying out complex rescue missions. These technologies enable drones to navigate hazardous environments autonomously, even in …
Published in International Journal on Drones · Vol. 1, Issue 2, 2025 · pp. 9–13 Read article
-
Exploring Type-II Diabetes Potential of Phyto-Derived Carbon Dots
Abstract: The integration of phytoconstituents with carbon dots (C-dots) presents a novel and sustainable approach to the development of nanotherapeutics for type 2 diabetes mellitus (T2DM). C-dots, zero-dimensional carbon-based nanomaterials, exhibit unique physicochemical properties including high fluorescence, tunable surface chemistry, biocompatibility, and low toxicity. Their ability to enhance the solubility, bioavailability, and targeted delivery of poorly soluble phytochemicals renders them highly suitable for biomedical applications. This study explores the synthesis of …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 3, 2025 · pp. 08–25 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Impact of Fly Ash Pollution on Quality of Agricultural Soils Around Thermal Power Station
Abstract: The coal-fired Khaparkheda Thermal Power Station (KTPS) and its fly ash pond in Nagpur District, Maharashtra, India has been responsible for serious fly ash pollution incidents of agricultural soil. The present study was carried out on the quality of soil samples around the fly ash pond and KTPS. The physicochemical and chemical characteristics of soil samples were observed to be affected due to fly ash pollution. The fertility of soil …
Published in Research & Reviews : Journal of Ecology · Vol. 14, Issue 1, 2025 · pp. 6–17 Read article
-
Environmental Advantages of Renewable Energy: A Review
Abstract: There is a shortage of fuel in many emerging nations, including India, because of increased manufacturing for many different development initiatives. If the thermal energy sources used to meet this rise in demand are coal-based, environmental damage and high production costs ensue. So, the greatest alternative approach is for the nation to build renewable energy-based power facilities. Sustainable in light of current and future societal, economic, and social demands, renewable …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 1, Issue 1, 2023 · pp. 31–39 Read article
-
Structural Optimization of FDM-Processed ASA Polymer Frames through Acetone Solvent Welding, Variable Infill Strategy, and Layer Orientation: Experimental Validation via Quadcopter Flight Testing
Abstract: Acrylonitrile styrene acrylate (ASA) is an amorphous terpolymer with superior UV resistance compared to acrylonitrile butadiene styrene (ABS), as its acrylate rubber phase lacks photodegradation-prone carbon–carbon double bonds. This study proposes acetone solvent welding as a polymer joining method to produce monolithic structures from FDM-processed ASA components, addressing three processing challenges: achieving structural continuity through polymer chain interdiffusion at solvent-wetted interfaces, correcting thermal warping via post-print geometric correction during welding, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 689–703 Read article