Search
475 articles for “mechanical testing”
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Feedback Based Three Finger Robotic Gripper
Abstract: This research presents the development and validation of a novel three-finger robotic gripper system enhanced with force feedback capabilities. Leveraging Force-Sensing Resistor (FSR) sensors and servo actuators, the gripper is engineered to dynamically adjust its grasp based on real-time force feedback. Through a series of iterative design iterations and experimental validation, the gripper demonstrates robustness and adaptability in various gripping scenarios. The integration of force feedback allows the gripper to …
Published in Journal of Mechatronics and Automation · Vol. 11, Issue 1, 2024 · pp. 11–17 Read article
-
Toxicological Optimization and Assessment of Buccal Films Containing Felodipine Co-crystals to Enhance Bioavailability
Abstract: The preformulation study of felodipine was carried out and it was found that the drug is poorly water soluble. The co-crystals were prepared using three different co-formers sorbitol, ascorbic acid and oxalic acid. The solublity enhancement was observed in combination with sorbitol compared to other co-formers used. The characterization of co crystals was performed like PXRD, FTIR, SEM Analysis. XRD results indicates the amorphous form of the drug. The co-crystals …
Published in Research and Reviews: A Journal of Toxicology · Vol. 14, Issue 2, 2024 · pp. 10–29 Read article
-
Experimental Study on Load Transfer Mechanism in Columns Retrofitted by Bonding Precast Segments and FRP Wrapping
Abstract: An experimental study was conducted to investigate the load transfer mechanism in columns retrofitted with precast segments and Fiber-Reinforced Polymer (FRP) wrapping. As the demand for structural retrofitting grows, it becomes crucial to comprehend the behavior and effectiveness of retrofit techniques to ensure the safety and integrity of existing infrastructure. The study involved subjecting a series of column specimens to axial compression loads in order to evaluate the load transfer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 153–165 Read article
-
Testing of Efficiency of Wind Turbine Blade NACA2415 Aerofoil Type Using Recycled Carpet Waste Polymer Composite Material
Abstract: In 2020, over 50% of residential properties in the United States were outfitted with carpet flooring, boasting an average longevity ranging from 10 to 18 years. Carpets are crafted from various fibers, including woven nylon, polyester, polypropylene, or wool fibers. Historically, nearly 6 billion pounds of discarded carpets were directed to landfill sites, perpetually undergoing decomposition processes. My current project entails the fabrication of a wind turbine blade utilizing a …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 314–324 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article
-
An Experimental Investigation of High Performance by Using Steel and Polypropylene Fibres
Abstract: This study explores the feasibility of partially substituting conventional cement in concrete with steel and polypropylene fibers to improve mechanical performance and introduce alternative composite materials. Concrete cube specimens measuring 150 × 150 × 150 mm were cast with varying mix designs corresponding to M20 and M25 grades. The experimental program was executed in two distinct phases. In Phase I, control mixes of M20 and M25 grade concrete were prepared …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 7–13 Read article
-
Zinc Oxide Nanoparticles from Murayya koenigii: Antibacterial Potential Review
Abstract: Nanoparticles (NPs) display unique characteristics in contrast to conventional physico-chemical synthesis methods, and they are utilized in various life science fields including surface coating, catalysis, food packaging, corrosion prevention, environmental cleanup, electronics, biomedical applications, and antimicrobial purposes. Metal NPs synthesized through green methods, particularly from plant origins, have garnered significant interest because of their inherent traits such as environmental friendliness, quick production, and cost efficiency. Over the past few years, …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 14, Issue 1, 2024 · pp. 54–67 Read article
-
Effectiveness of PTFE-Based Nano-coatings in Improving Corrosion and Wear Resistance of Stainless Steel
Abstract: Polytetrafluoroethylene (PTFE) has emerged as a highly effective material for enhancing the durability and performance of metal surfaces, particularly in environments requiring superior corrosion resistance and low friction. This study investigates the application of PTFE coatings on various metallic substrates, with a focus on stainless steel and carbon steel, to improve their corrosion resistance, wear protection, and tribological performance. Utilizing advanced deposition techniques such as sol-gel and plasma spray, PTFE …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 32–38 Read article
-
Experimental Analysis of Wear Characteristics in Natural Fibre Composite Materials
Abstract: In mechanical systems, energy loss and material degradation due to attrition are frequently the consequences of sliding contacts, which frequently lead to premature system failure. In this study, at 50°C, 80°C, and 110°C, the hardness was tested; the results showed that the values were 350.7, 422.5, and 455.5 HV, respectively. After conducting a high-temperature wear test, the mass loss of the as-deposited composite coatings was assessed by an electrochemical approach …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 444–450 Read article
-
Systematic Review on: Peptic Ulcer and Its Management
Abstract: Peptic ulcer disease (PUD), which affects 5–10% of people worldwide, is still a significant global health concern. Gastric acid and pepsin's corrosive effects cause mucosal injury in the stomach, duodenum, or lower oesophagus. Long-term use of nonsteroidal anti-inflammatory drugs (NSAIDs) and Helicobacter pylori infection are the primary reasons. This review's goal is to examine PUD's aetiology, risk factors, pathophysiology, clinical symptoms, diagnostic methods, and evidence-based treatment modalities. PubMed, Google Scholar, …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 16, Issue 1, 2026 Read article
-
Study of an Improved Quantum Particle Swarm Optimization-Based Framework for Neural Network Optimization in Modelling of Polymer Data
Abstract: The accurate forecasting of polymer viscosity at various physicochemical conditions has been quite critical due to the nonlinear interactions and interrelations between the variables. This paper suggests a better hybrid modelling framework, which involves the use of Artificial Neural Networks (ANN) and more advanced versions of Quantum Particle Swarm Optimization (QPSO) to better predict polymer viscosity. The input parameters taken are, namely, log (shear rate), polymer concentration, NaCl concentration, Ca …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Enhancement of Mechanical Properties in Hemp Fiber-Reinforced Epoxy Composites Using Graphene Nanoplatelets
Abstract: This study investigates how incorporating graphene nanoplatelets (GNPs) influences the mechanical performance of hemp fiber–reinforced epoxy composites. Hemp fibers were chemically treated by alkali treatment to improve fiber–matrix adhesion owing to their high specific strength, stiffness, renewability, and environmental friendliness. Graphene nanoplatelets were dispersed in acetone by probe sonication and added to acetone epoxy matrix at a concentration of 0.5 wt% and 1.0 wt%, respectively. Composite laminates were prepared by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 98–109 Read article
-
Synthesis of Novel Hybrid Biocomposites and Experimental Investigation of Mechanical Properties
Abstract: As industries increasingly adopt additive manufacturing, the demand for materials that offer better mechanical properties and functionality is on the rise. The purpose of present research work is to develop a novel hybrid biocomposites for 3D printing applications. The acacia bark, waste powder obtained from wet mahanarayan oil consisting of herbs and other bio filler was added in polylactic acid (PLA) for synthesis of hybrid biocomposites filament by twin screw …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
Virtual Method to Predict Dental Disease
Abstract: The integration of technology and medicine in the healthcare domain has led to the emergence of inventive strategies to improve patient care and diagnostics. One such groundbreaking methodology is the utilization of Convolutional Neural Networks (CNNs) within the domain of deep learning, particularly for image recognition and processing tasks. In this paper, we propose a novel approach to image recognition that employs state-of-the-art deep learning algorithms to create a user-friendly …
Published in Journal of Artificial Intelligence Research & Advances · Vol. 11, Issue 1, 2024 · pp. 8–15 Read article
-
Mechanical Property Assessment of Hybrid Fiber Reinforced Composites Through Experimental Research
Abstract: Natural fibre reinforced composites are gradually taking the place of synthetic fibre composites due to its inexpensive cost, low density, and ease of supply. Furthermore, the addition of some waste materials to composites has remarkable properties that are attracting interest from a wide range of technical domains. Fibre reinforced with glass, carbon, and jute were used to generate hybrid composites. As a filler, different amounts of eggshell powder were mixed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 244–251 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Prototype Model Development and Design Analysis of A Solar Tricycle for Physically Challenged People in India
Abstract: Society is greatly concerned about the mobility of individuals with physical disabilities. The scarcity of energy resources and the issue of pollution are currently the primary concerns. These issues can be resolved by employing alternative energy sources such as solar power. This paper presents an overview of the existing solar tricycles designed for those with disabilities. It also improves a handicapped-friendly solar-powered tricycle. The goal is to reduce handicapped people's …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 1, Issue 1, 2023 · pp. 43–56 Read article