Search
381 articles for “flexural”
-
Effect on Mechanical Properties of Concrete Using Industrial Waste
Abstract: Waste management is a great challenge for any country in current and future aspect. Solid waste generates from different industry i.e. stone, marble, coal, tire etc. are major issues in India. These wastes create major environmental & health problems for surrounding people. This study represents the utilization of waste kota stone slurry and marble powder as sand & cement replacing material with 15% fly ash of class-C. Waste kota stone …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 2, 2023 · pp. 19–25 Read article
-
A POLYESTER RESIN COMPOSITE-BASED EXPERIMENTAL INVESTIGATION OF CHARCOAL PARTICLE REINFORCED GLASS FIBRE
Abstract: The mechanical characteristics of jute/E-glassfibre polyester composites were examined (AC) after theincorporation of activated carbon particles. The polyestermatrix was loaded with five different particle loading ratios(0, 5, 10, 15 and 20 percent). To increase the adhesion of jutefibres to the polyester matrix, they were treated in a NaOHsolution. Hardness, tensile, and water absorption tests wereperformed on polyester, Activated Carbon- filled polyesterand jute/E-glass fibers polyester with and without ActivatedCarbon filter. The …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 1, 2023 · pp. 57–62 Read article
-
Experimental Investigation of High Strength Geopolymer Concrete
Abstract: This paper presents the experimental studies concerning high strength in geopolymer concrete. So far many researches were carried out in geopolymer concrete and also it enhances the strength and durability of OPC concrete. Several compositions of geopolymer concrete mixes were executed by varying the percentage of fly ash and GGBS. By finding the optimum percentage of fly ash and GGBS from the experimental results, the mechanical properties of geopolymer concrete …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 2, 2017 · pp. 29–31 Read article
-
Fracture Characterization of Glass-Sheep Wool Fabric Reinforced Epoxy Hybrid Composite using Stacking Sequence
Abstract: AbstractFibre-reinforced composites are advance market share in structural applications, but further growth is restricted by their lack of toughness. Fibre hybridization is a hopeful approach to toughen composite materials. By combining two or more fibre types, these hybrid composites offer a better balance in mechanical properties than non-hybrid composites. The research and advancement in the area of natural fiber composites (NFC) are gaining more importance due to its eco-friendly, biodegradable, …
Published in Journal of Instrumentation Technology & Innovations · Vol. 8, Issue 3, 2018 · pp. 8–14 Read article
-
Effect of Mixing Time on Mechanical Properties of Epoxy-Fly Ash Composite
Abstract: Particulate reinforced polymer composites have been designed to improve the (polymer) composite properties and with reduction of cost. In the present study, fly-ash is used as a filler material. Samples are made with different mixing times i.e. 5, 10, 15, 20, 25 and 30 min. Ultrasonic and magnetic mixing are the two ways to mix the particulate as fillers. The resulting mechanical properties such as flexural strength, tensile strength and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 2, 2015 · pp. 11–17 Read article
-
Advance green fiber reinforced thermosetting composites for reliable assistive device fabrication
Abstract: The biodegradable green fibers derived from natural plants are abundantly available and are currently considered as potential reinforcements. Present study aims at investigating the mechanical properties of green jute fiber reinforced thermoset composites as possible alternatives to the inorganic glass fiber reinforced prosthetic assistive device. Continuous green jute fiber are treated with sodium hydroxide and acetic acid, and then added to epoxy and polyester at varying fiber loadings to produce …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 1–8 Read article
-
Preparation and Characterization of a Novel Lignocellulosic Fiber from Calotropis gigantea Stem Fiber for Thermoplastic Composites
Abstract: In the current article, Calotropis gigantea fiber mat (CGM)/thermoplastic polypropylene (PP) strengthened non-woven unidirectional composites were successfully manufactured by hot compression molding using the film piling method. Micromechanical and physicomechanical properties such as tensile, flexural, compressive, impact properties, thickness, swelling, and water absorption of CGM/PP composites were evaluated for the effects of CGF composition, mercerization of CGF as well as the inclusion of two types of coupling agents (vinyltriethoxysilane and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 15–33 Read article
-
Influence of Polypropylene fibres in mechanical properties of fly ash concrete
Abstract: The abundant production of fly ash from coal-based thermal power plants as waste products becoming the problem for their disposal and it is also hazardous to the environment. The inclusion of fly ash in concrete reduces environmental pollution and improves the workability and durability properties of concrete. The present work has been carried out to find mechanical properties such as compressive, split tensile and flexural strength polypropylene fly ash-based concrete …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 54–64 Read article
-
A Review on Sisal Fiber Reinforced Composite Materials and Effects of Various Factors on its Mechanical Properties
Abstract: AbstractIn the modern world of science and technology, there is current rising trend towards the augmentation of mechanical properties of composites by introducing different materials in many flexible ways to overcome the newly resurgent demands, especially in engineering practices. Many natural fibers like jute, sisal, bamboo, bagasse, hemp and banana find their application as a reinforcing component in composite materials due to their light weight, low cost, low density, biodegradability, …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 25–28 Read article
-
Investigation of Jute Mat with Waste Fish Net by Varying Matrices in Hybrid Composites
Abstract: AbstractIn this study the low cost material of multi filament waste fish net and jute fibres were incorporated as the main reinforcing materials with epoxy resin and polyester resin as the matrix in order to increase the strength of the hybrid composites. The samples were fabricated using hand layup technique. The nylon fibre of waste fish net possesses high impact strength, elasticity property and highly resistant to abrasion of chemicals …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 27–34 Read article
-
STUDIES ON MECHANICAL, THERMAL AND PERMEATION PROPERTIES OF HDPE (BLOW GRADE) WITH MICROSILICA CLAY
Abstract: HDPE is widely used in container applications. The mechanical properties and barrier properties can be further improved by the addition of reinforcements like nanoclays. But, however the cost of nanoclays are higher about Rs.5000 – 6000/kg whereas micro silica cost is economical about Rs.450-1000/kg. Hence we used micro silica of 270nm particle size in this project with HDPE blow grade. HDPE (High density polyethylene) was melt blended with micro silica …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 41–53 Read article
-
Effect of Polymer Modified Fibers on Strength of Concrete
Abstract: AbstractThe results of an experimental investigation to study the effects of hooked steel fibers with varying dosage and polymer latex with fixed dosage in concrete are studied. In this experimental study, varying volume fraction of hooked steel fibers from 0% to 7% by weight of cement at the interval of 1% of fiber and SBR latex polymer of fixed volume of 15% by weight of cement were used. All specimens …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 15–24 Read article
-
Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Abstract: AbstractParticulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 44–56 Read article
-
A Study on the Sintering Behavior of Al2O3/Y2O3 Doped ZrO2 Composites
Abstract: AbstractZirconia ceramics are widely used as cutting tools due to their very high hardness, excellent fracture toughness, flexural strength, and wear-resistance properties. Tetragonal zirconia exhibits better mechanical properties due to the transformation toughening of zirconia. The superior mechanical properties in zirconia are mainly due to higher density and controlled microstructure. In the present work, an attempt has been made to prepare near full-dense zirconia bodies with controlled microstructure by optimizing …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 1–8 Read article
-
Effect of Processing Methods and Fiber Content on Mechanical and Abrasive Wear Performance of Sisal Fiber/PLA Biocomposites
Abstract: AbstractIn this work, an attempt is made to study the effect of processing methods and fiber content on mechanical properties and abrasive wear behavior of polylactide-based biocomposites reinforced with sisal fiber. Three processing methods namely film-stacking, melt- impregnation and solvent-impregnation were used for fabricating unidirectional sisal fiber- reinforced biocomposites. The impact of processing methods and fiber content on biocomposites was assessed through evaluation of mechanical properties, viscoelastic behavior and abrasive …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 1–9 Read article
-
Investigate the Physical and Mechanical Properties of Short Coconut, Short Bamboo Fibers and Short Glass Fiber Reinforced Phenol Formaldehyde Composites
Abstract: In the field of research, the composite materials become the dominant materials from last forty years. Because of eco-friendly nature and sustainability, the researchers are using natural fibers in polymer composites to obtain good thermal, acoustic insulating properties, excellent formability and weight-resistance compared to traditional building materials. In the present research work, seven different fiber reinforcement Phenol formaldehyde matrix polymer composite i.e., short coconut, short bamboo and short glass fiber …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 53–61 Read article
-
Microstructural Characteristics and Mechanical Properties of the Green Composites Reinforced Bamboo Optimized the Treated Parameters
Abstract: Concrete and steel are traditional building materials with high strength and stress. They are usedeffectively in civil construction, structures of bridges and others. According to the current trend, theconstruction materials have more attention for low density and high durability which produced fromnatural materials; moreover, they are able to be recycled and reused. In this study, the green compositeswere fabricated based on the highly performance epoxy combined with bamboo to get …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 28–38 Read article
-
Thermally Trigged Self-Healing Smart Shape Memory Polymer Composite
Abstract: Temperature-responsive self-actuating PU/MWCNTs composites were prepared with micro-compounder through in-situ polymerization. For making of 1CNTPU composite sample 1 part per hundred multiwall Carbone nanotubes (MWCNTs) were reinforced into the neat polyurethane (PU) base matrix. Surface characterizations for pure and composite have studying by using Atomic Force Microscope (AFM), high resolutions Scanning Electron Microscopy (SEM). Properties like shape recovery, storage modulus, loss modulus, tensile stress, degree of hardness, and flexural stress …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 10–18 Read article
-
Glass Fiber Layer Effect on Chemico-mechanical Properties of Light Cure Adhesive Systems
Abstract: Introduction: Orthodontic adhesives should have clinically acceptable shear and tensile bond strength to withstand masticatory forces and those generated by treatment mechanics. Mechanical properties of the adhesive, such as flexural modulus of elasticity, tensile strength, and compressive strength, are more heavily influenced by the resin matrix's Degree of cure (DC). Aim: The study compares the effect of the Glass fiber layer on Chemico-mechanical properties using three different light cure adhesive …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 1–9 Read article
-
Mechanical Properties of Composites Made from Waste PET and Coconut Husk Fibres Using an Innovative Method
Abstract: The main purpose of this study was to develop a composite material based on two waste products, namely, polyethylene terephthalate (PET) bottles and coconut husk fibres using a simple innovative method to improve its mechanical properties. The fibres, after extraction, were treated with 5 wt% NaOH. They were then coated with a thin layer of polyester resin. The composite specimens were then manufactured in an industrial furnace. The shredded PET …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 56–71 Read article