Search
1120 articles for “Performance characterization”
-
Electro-chemical treatment of graphite oxide: preparation and Characterization of high quality Graphene material
Abstract: With the enlargement of flexibility and suitability in material industries, high-performance thermal management materials are demanded with high thermal conductivity and electrical insulation are growing. In recent years, graphene has received a numerous focus from science community due to its high thermal conductivity and electrical insulation. Fabrication of light weight graphene and its derivatives as graphene Oxide (GO) and reduced graphene oxide (rGO) via facile processing method is yet a …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 25–36 Read article
-
Factors Influencing the Design of Parabolic Trough Collector: A Review
Abstract: Due to limited resource availability and high conventional energy usage, research into renewable energy has increased during the past few years. Utilizing collecting systems, significant renewable energy can be produced from the available solar radiation. The majority of solar energy harvesting systems use parabolic trough concentrating collectors. The performance of parabolic trough collectors as a whole is examined in this paper. The operating characteristics, such as the type of receiver …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 2, 2023 · pp. 1–8 Read article
-
Data-Driven Material Design and Performance Improvement: Constructing Sustainable Polymer Nanocomposites Using Deep Learning
Abstract: In the formation of sustainable polymer nanocomposites, the effective material techniques are required to balance the mechanical qualities, environmental compatibility and processing efficiency. The optimization of polymer matrix, nanofiller loading, processing conditions and material properties is typically time consuming, resource intensive and highly dependent on trial-error methodology using standard experimental techniques. The present work provides a data-driven approach that combines deep learning with sustainable polymer nanocomposite design for predicting and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Automotive Aluminium Advancements: Driving Efficiency and Performance in Manufacturing
Abstract: Due to the special qualities of aluminum and its alloys, aluminum is one of the most versatile materials used in engineering and construction. Its electrical and thermal characteristics are good, and it reflects light and heat well. It is highly corrosion-resistant under many service conditions. Besides, it is soft, ductile and possesses lower specific gravity. It can be cast and worked into almost any form and can be given a …
Published in International Journal of Manufacturing and Production Engineering · Vol. 1, Issue 2, 2023 · pp. 20–24 Read article
-
Corn Husk Fiber–Reinforced PLA Biocomposites: Mechanical, Thermal, and Biodegradation Performance
Abstract: The increasing environmental burden caused by conventional petroleum-based plastics has driven significant interest in the development of sustainable polymer composites reinforced with renewable natural fibers. In the present work, corn husk fiber (CHF), an agricultural waste by-product, was utilized as a reinforcing phase in a polylactic acid (PLA) matrix to fabricate eco-friendly biocomposites. Composite samples with varying fiber loadings (0–40 wt.%) were produced through twin-screw melt blending followed by compression …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 312–327 Read article
-
Bio-physiochemical analysis of Algae –Gasoline and Butanol-Gasoline blended fuels
Abstract: AbstractThe main objective of this paper was to formulate and identify the physiochemical characteristics of fuel blended with algae oil, butanol and gasoline. The comparison of the characteristics of algae and butanol blended with gasoline is also presented in the paper. These blends have been prepared with three different blending ratio 5%, 10% and 15%, respectively. The requirement of another source of energy is increasing rapidly as fossil fuels are …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 8, Issue 1, 2018 · pp. 10–16 Read article
-
Experimental Investigation of Hardness of FSW Al 5083 Alloy for Naval and Marine Application
Abstract: Friction stir welding (FSW) is a relatively novel method of solid-state joining. This connecting method is adaptable, environmentally benign, and low-energy. The present study focuses on hardness testing on welded butt joints, introducing the Friction Stir Welding procedure on aluminium alloys Al 5083, which are known for their remarkable performance in severe conditions. It is widely used in naval and marine applications due to its excellent resistance to seawater damage. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 227–236 Read article
-
Evaluation of the Emission and Engine Operability of Biodiesel and Biodiesel Blends Produced from Alkali-Catalyzed Esterification and Transesterification of Jatropha Oil Feedstock
Abstract: This study reports on the engine performance analysis of biodiesel and blends produced from jatropha-based bio-oil feedstock via combined esterification and transesterification process, the physiochemical of the bio-oil, and subsequent biodiesel produced. Jatropha bio-oil was characterized to determine its fuel properties. A liquid phase transesterification reaction at 60 min reaction time, 50°C temperature, using a methanol-oil molar ratio of 40:1 and 0.35 g of sodium hydroxide (NaOH) catalyst was carried …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 9–21 Read article
-
Effect of Blunt Truncation in an Aerospike Nozzle
Abstract: Aerospike nozzles are gaining attention as a more advanced alternative to conventional bell nozzles, mainly because they can perform efficiently across a wide range of altitude conditions. Unlike traditional converging–diverging nozzles, aerospike designs naturally adjust to changes in ambient pressure, allowing the exhaust flow to expand more effectively. This results in better thrust performance under varying operating conditions, making them a strong candidate for future aerospace propulsion systems. In this …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Effect of Sol-Gel Coating on Fire Performance and Optical Properties of Wood Panels
Abstract: Investigates the impact of sol-gel coating on the fire performance and optical properties of wood panels.SEM, EDX, and infrared spectroscopy with the Fourier transform were used to characterize the sol-gel coating, which was put on to the wood panels using a dip-coating technique. The fire performance of the coated and uncoated wood panels was evaluated by measuring the ignition time, flame spread rate, and total heat release rate. The optical …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 20–24 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Investigating the Effect of Spectral Variations on the Performance of Monocrystalline, Polycrystalline and Amorphous Silicon Solar Cells
Abstract: The study of spectral variations is very important in the characterization of silicon solar cells. The spectral variations of monocrystalline, polycrystalline and amorphous solar cells is studied through the spectral response with the help of spectral response evaluation meter, CEP-25HS-50SR. PVsyst 6.4.3 software is used to study the variation of air mass throughout the day and the year and to understand that how solar irradiance varies with the changing air …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 3, 2016 · pp. 28–36 Read article
-
Developing an AI-Based Novel Forecasting Framework for Surface Irregularity in Metal Matrix Materials
Abstract: Surface irregularity in metal matrix materials (MMM) signifies the deviations from smoothness, influencing structural integrity and performance frequently arising from the manufacturing process along with intrinsic material characteristics that influence effectiveness. Limitations in data, model interpretability and complexity are the difficulties that impede artificial intelligence (AI) based surface irregularity in MMM. In this study, we suggested a novel framework of Gaussian regression fused multi-strategy adaptive boosting classifier (GR-MABC) for the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 48–56 Read article
-
Melanoma Skin Cancer Detection Using Deep Learning
Abstract: Melanoma, a fatal type of skin cancer, is a major global health concern. For better patient outcomes, early and precise detection is essential. A branch of artificial intelligence called deep learning has demonstrated encouraging outcomes in medical image analysis, particularly the identification of skin cancer, in recent years. We present a new method for detecting melanoma skin cancer in this paper by utilizing the ResNet-50 architecture, a deep convolutional neural …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 14, Issue 2, 2025 · pp. 1–9 Read article
-
Use of Alccofine and Porcelain Waste Aggregate in Concrete Composite for Strength Enhancement
Abstract: Building construction applications benefit from recent studies on alumino-silicate alkaline activation geo-polymers and their supplementary modifier alccofine as well as new process advancements characteristics including flexural strength and split tensile strength determine structural performance and durability. The construction sector utilizes supplementary cementitious materials, waste materials, and Geo Polymer Concrete (GPC) for concrete composites because it requires environmental sustainability along with better functionality and longer service life of concrete structures. This …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 23–33 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
A Comparative Study on Carbon Nanotube MOSFET, Silicon Nanowire MOSFET and Single Gate MOSFET
Abstract: Among many of the concerns for the researchers in nano-electronics, Single Gate MOSFET, Silicon Nanowire MOSFET and Carbon Nanotube MOSFET were very popular three. All of them are different in their structures and performance. This paper is focused on the comparison of their characteristics in terms of Current- voltage relations, Mobility charge density and Quantum capacitance. ‘FETToy’ in ‘nanohub’ was used to simulate the predefined models in room temperature. Drain …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 2, 2015 · pp. 7–12 Read article
-
Optimization of Surface Roughness and Material Removal Rate for Dry Turning Operation in CNC Lathe UsingTaguchi Method
Abstract: In this work the cutting of AISI 1045 material will be carried out using CNC lathe followed by Taguchi methodology. Taguchi method is usedto formulate the experimental layout. A Taguchi L9 design of experiment (DOE) will be applied and the analysis ofvariance (ANOVA) will carried out to determine the effect of process parameters on process performance. To analysethe effect of each parameter on the machining characteristics and to predict the …
Published in Trends in Machine design · Vol. 5, Issue 1, 2018 · pp. 46–53 Read article
-
Formulation and Evaluation of Herbal Cream from Ethanolic Extract of Panfuti (Bryophyllum pinnatum) Leaves
Abstract: Bryophyllum pinnatum, commonly referred to as the "miracle leaf" or "life plant," is a succulent medicinal plant widely valued in traditional medicine. It is well known for its broad range of pharmacological activities, including wound-healing, anti-inflammatory, and antioxidant properties, making it an important species in natural and herbal therapeutics. This study aimed to formulate a topical cream incorporating Bryophyllum pinnatum extract and evaluate its physicochemical properties, stability, and potential for …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 3, 2026 Read article
-
Polymer Composite-Enabled UAV Platform for Edge AI-Based Precision Agriculture: A System-Level Evaluation
Abstract: This study investigates the system-level role of commercially available polymer composite materials in enabling lightweight and energy-efficient unmanned aerial vehicle (UAV) platforms integrated with edge artificial intelligence for real-time agricultural monitoring. Rather than developing or experimentally characterizing new composite materials, the work evaluates fiber-reinforced polymer (FRP) composites and epoxy-based laminates as enabling structural components whose established properties support UAV performance in precision agriculture. Their high strength-to-weight ratio, corrosion resistance, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 218–240 Read article