Search
538 articles for “structural parameters”
-
COMPARATIVE SEISMIC RESPONSE OF IRREGULAR HIGH-RISE RCC 25 STOREY BUILDINGS WITH AND WITHOUT SHEAR WALLS CONSIDERING P–DELTA EFFECT
Abstract: The seismic performance of high-rise reinforced concrete (RCC) buildings is significantly affected by plan irregularity, lateral stiffness distribution, and second-order (P–Delta) effects. Irregular structural configurations may generate torsional response and increased deformation demand under seismic excitation while geometric nonlinearity further amplifies displacement and internal forces in tall structures . This study presents a comparative seismic assessment of a G+24 storey RCC building having overall plan dimensions of 30,000 mm × …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Analyzing the Influence of Soil-Structure Interaction on High-Speed Rail Embankments: A Plaxis 3D Simulation Study
Abstract: The introduction of high-speed rail (HSR) in India has seen an increase in travel demand and areduction in travel time. However, the stability and deformation characteristics of railwayembankments and soil structure interaction behavior under high-speed design requirements forIndian soil conditions need to be predicted using simplified 3-D finite element modelling. Theobjective of this research is to analyze the rigid ballast-less and flexible ballast-based high-speed railtrack embankments for various critical conditions …
Published in Trends in Transport Engineering and Applications · Vol. 10, Issue 1, 2023 · pp. 18–45 Read article
-
Enhancing Surface Roughness of Polylactic Acid (PLA) 3D-Printed Parts Using CO₂ Laser Scanning: An Experimental Study on Parameter Optimization
Abstract: Fused deposition modeling (FDM) of polylactic acid (PLA) often suffers from poor surface finish due to the inherent layer-by-layer deposition process, limiting its use in high-precision applications. This study investigates CO₂ laser scanning as an efficient post-processing technique to reduce the surface roughness (Ra) of PLA parts while maintaining structural integrity. Specimens (100 × 80 × 5 mm) were fabricated with varying infill densities (35%, 70%, and 100%) to assess …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 503–511 Read article
-
Design and Simulation of Improved Multilevel Inverter For Solar Photovoltaic Applications
Abstract: The energy is extending rapidly, anyway will stand up to the modernization of India and fiscal turn of events, further reviving the pace of the test, especially considering the improvement of India's basic amassing approach needs. Starting late, influence age has extended rapidly, yet the business is filled by neighborhood dispersion associations, circulation frameworks and transmission frameworks, and the cash related condition is moderate and convincing. The display of photovoltaic …
Published in Journal of Power Electronics and Power Systems · Vol. 10, Issue 2, 2020 · pp. 34–46 Read article
-
Acoustical and Thermodynamical Studies of L- Glycine in Buffer Solution of Different pH at 298.15 K
Abstract: The volumetric, viscometric, and acoustical studies are used to investigate the exchange of L-Glycine in a buffer solvent system of different pH at 298.15K within a concentration range of 0.02 to 0.10 molal. L-glycine, being the simplest amino acid, serves as an important model compound for understanding molecular exchanges in biological systems. The effect of pH on the physicochemical properties of amino acid solutions is of considerable significance, as it …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 2, 2026 · pp. 48–58 Read article
-
Squeeze Casting of Hybrid Aluminum Matrix Composites: A Critical Review of Process Optimization, Reinforcement Strategies, and Performance Outcomes
Abstract: Increasing demand for lightweight, performance-oriented components in automotive, aerospace, and defense industries has driven advancements in squeeze casting, a hybrid technique merging forging and die-casting advantages to produce near-net-shape aluminum matrix composites (AMCs) with superior mechanical-tribological properties. This review critically examines the interplay of process parameters (e.g., squeeze pressure: 70–150 MPa, melt temperature: 650–800°C), reinforcement characteristics (volume fraction ≤10%, particle size: 10–71µm), and interfacial engineering strategies (flux-assisted bonding, ultrasonic dispersion) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 52–60 Read article
-
Application of Artificial Neural Networks in Optimizing Polyhouse Roof Truss Design
Abstract: Polyhouses are specialised agricultural structures developed to maintain controlled environmental conditions for crop cultivation, thereby ensuring consistent productivity even under adverse climatic circumstances. The performance of these systems largely relies on the structural stability and cost efficiency of the roof truss, which must achieve an effective balance between strength, adaptability, and economy. In this research, an Artificial Neural Network (ANN)-based modelling framework is introduced to optimise the members of polyhouse …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 15–25 Read article
-
Synthesis and Characterization of VO 2+ doped SrMg 2 (PO 4 ) 2 Nanopowder by Solid State Reaction technique suitable for White LED material
Abstract: VO2+ doped SrMg2(PO4)2 nanopowder was synthesized by using solid state reaction (SSR) technique. Various experimental techniques have been performed on prepared sample. XRD analysis has revealed that prepared nanopowder is in monoclinic phase. The average crystallite size, micro strain and dislocation density evaluated and make an analogy with W-H plot method. SEM micrographs shows that agglomerated stone like structure and EDS spectrum shows elemental compositions of synthesized sample. FTIR spectrum …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 95–110 Read article
-
Numerical Study of Natural Convection Heat Transfer in Porous Particles Through Composite Filters
Abstract: The study of heat transmission through porous materials within the confines of reactor configurations stands as a pivotal realm of inquiry in the realms of engineering and the applied sciences, possessing wide-ranging applications spanning from soil mechanics to the refinement of heat exchange systems. Porous substances, distinguished by their interconnected voids or interstices, present an array of reactor forms that profoundly shape the flow of fluids and the conveyance of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 268–279 Read article
-
Evaluation of Polymer-Ceramic Scaffolds for Dental Bone Regeneration
Abstract: Looking at the aspects of periodontal disease, traumatic injury, congenital defects, and the preparation of implant sites, the deficiency of dental bone, and its reconstruction, which has been simplified by many by oral and maxillofacial surgery, has proven to be a very hard and tedious task. There are many solutions which are clinically accepted, as the use of auto, allo, and xenografts, very common practices in surgery, but they come …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Physics-Adaptive Digital Twin with Neural-Operator Reduced-Order Modelling
Abstract: This study proposes a novel Physics-Adaptive Digital Twin with Neural-Operator Reduced-Order Modelling (PADT-NO) framework for predictive modelling of complex, nonlinear, and multiscale fluid flows. The proposed mathematical framework integrates fundamental conservation laws, Navier–Stokes dynamics, physics-constrained neural operators, adaptive reduced-order modelling, and uncertainty-aware state estimation within a unified computational architecture. Unlike conventional computational fluid dynamics and purely data-driven approaches, the proposed model dynamically couples high-fidelity physical information with a low-dimensional latent …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 · pp. 89–103 Read article
-
Effect of Heat Exposure on Structural Integrity of Geopolymer Concrete Composites
Abstract: The research evaluates the thermal degradation effects of high temperatures on Geo Polymer Concrete Composite (GPCC) by examining alccofine concrete, concrete made with alccofine and porcelain waste aggregates. Knowing how GPCC behaves under high temperatures proves essential for protecting buildings during fires as well as industrial applications. Each mix design received composite concrete samples that underwent increased heating conditions from 100°C to 700°C at 200°C intervals. Post-heating, various parameters were …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 318–328 Read article
-
Enhancement of Horizontal Jet Impingement Heat Transfer Analysis on Vertical Flat Plate
Abstract: This research investigates the heat transfer characteristics and heat flux distribution associated with parallel jet impingement on a vertical flat plate. A comprehensive computational fluid dynamics (CFD) analysis is carried out and systematically validated against available experimental data to ensure the accuracy and reliability of the numerical model. The jet length is maintained constant at 12 mm, while the jet-to-plate separation distance is varied at 6, 12, 18, and 24 …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 65–80 Read article
-
Effect of Annealling on Optical Band Gap of Fe2O3 Thin Films on Amorphos Transparent Glass Substrate by Spray Pyrolysis Method
Abstract: The Fe 2 O 3 thin film has widely used photo-electrochemical cells. In this paper, the optical properties like band gap of thin films is depend on annealed temperature at 100 o C and 200 o C was discussed. The optical property of Fe 2 O 3 are studied by UV- Vis spectroscopy .The optical band gap decreased after increasing annealing temperature. The refractive index of Fe 2 O 3 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 25–29 Read article
-
Synthesis of A Supercapacitor Based on Nanomaterials
Abstract: Demand for various energy storage technologies in electronic and electrical devices continuously goes on increasing. In that context, objective of this research work is to develop and test an electrode of a energy storage module (supercapacitor) using nickel hydroxide and carbon-based nanocomposite materials. Electrochemical performance of electrode is enhanced by optimizing synthesis parameters and designing the electrochemical cell. Conventional and all solid-state supercapacitors are developed with notable electrochemical performance. Pure …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 24–39 Read article
-
Advancements in Seismic Analysis Based on Shear Walls Composite Materials
Abstract: In this study more than 30 research papers are thoroughly reviewed in the area of Seismic Analysis based on Shear Walls. Seismic performance evaluation is used to assess a construction's seismic behavior in accordance with predetermined performance criteria. These methods have been applied in a number of assessment studies to investigate the seismic behavior of shear wall designs, and their findings have advanced the field overall. Shear wall is works …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 235–243 Read article
-
Optimal Design of Solar Roof Top Photovoltaic Plant Under Various Operating Conditions
Abstract: As conventional energy sources are quickly exhausted, the need to switch to sustainable alternatives has never been more urgent. The transition from conventional energy resources to renewable sources, particularly solar energy, has emerged as a pivotal step towards sustainable development This paper explores the advantages of solar power plants, with a focus on rooftop solar installations. Installing solar panels on a roof is revolutionizing the industry. The design phase of …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 1, 2023 · pp. 35–45 Read article
-
Experimental and Simulated Analysis of Hybrid Auxiliary Energy Storage System for Electric Vehicles
Abstract: Electric mobility contributing to greater extent to balance the energy and power demands, energy storage unitsas well as environment safety for current automobile sector. Electric vehicle has major efficient features of zerocombustion, longer charging and discharging cycle which plays a vital role to replace the ongoing increase in price ofpetroleum fuels and its harmful effect son environment with their degrading store. Many non-conventional energysources like solar, tidal, wind etc. Can …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 1, 2023 · pp. 23–40 Read article
-
Experimental Investigation of Effect of Laser Process Parameters and Heat Input on Hardened Bead Geometry and Power Density of ASTM Grade 3 Pure Titanium using CW Laser Beam
Abstract: This research paper presents the experimental study of laser process parameters and heat input on hardened bead profile of ASTM Grade 3 commercially pure titanium sheet of 1.5 mm thickness using 2kW CW Nd: YAG laser. The selected two laser process parameters are: (1). Low laser process parameter (LLPP): Laser Power (LP): 600 Watts, Scanning speed (SS): 2000 mm/min, Focused position (FP): -10 mm with heat Input (HI): 180 J/cm …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 2, 2017 · pp. 42–52 Read article
-
MODELLING HETEROGENEOUS POROSITY IN ALLUVIA PLAIN DEPOSITION IN DELTAIC FORMATION
Abstract: Abstract Porosity of soil are basically determine for various purpose, but this papers monitor degree of porosity in alluvia plain deposition under heterogeneous lithostratification, the study examine the predominant deposition of heterogeneous porosity in alluvia plain, such condition were observed in deltaic environment, such heterogeneous degree of porosity will definitely affect other engineering soil properties, this paper try to effectively investigate and determination of total evaluation for such heterogeneous porosity …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 1–10 Read article