Search
473 articles for “Chemical processing”
-
Effect of Annealing Temperature on the Structural, Morphological and Electrochemical Properties of Ruthenium Oxide Electrodes
Abstract: Transition metal oxide thin films are in great demand for a variety of technical applications, Ruthenium oxide is one of them having distinct structural, optical, chemical, and electrical properties. The structural and morphological characterization of Ruthenium oxide thin film electrodes created using the sol-gel spin coating process is covered in this work. For annealing, temperatures between 200°C and 900°C were employed. To examine electrochemistry, cyclic voltage measurement and chronopotentiometry were …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 15–24 Read article
-
Production and Properties Estimation of Algal Biodiesel
Abstract: The current study examines the production of biodiesel from algal biomass. The investigation was conducted to identify the optimum conditions for oil extraction and transesterification. Solvent extraction method with hexane/isopropanol as a solvent was used for oil extraction. Extracted algal oil was converted into biodiesel with conventional transesterification process, maximum yield was obtained at 1:6 molar ratio with 1 % concentration of NaOH as catalyst at 65°C. The systematic physio-chemical …
Published in Journal of Automobile Engineering and Applications · Vol. 7, Issue 1, 2020 · pp. 24–27 Read article
-
Effect of Cell Carrier Loading on Phenol Degradation in Association with Production of Exopolymeric Substances and Biofilm Characteristics during Start up and Steady State in a Pulsed Plate Bioreactor
Abstract: Biodegradation of phenol in a continuous pulsed plate bioreactor (PPBR) using immobilized bacterial cells has been shown to be a highly efficient process. The present paper reports the studies on the effect physical characteristics of biofilm (biofilm thickness, attached dry biomass and biofilm dry density) and chemical characteristics in terms of exopolymers viz. protein, carbohydrate and humic substance produced by Pseudomonas desmolyticum (NCIM 2112) bacterial cells immobilized on granular activated …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 24–30 Read article
-
Understanding Food Spoilage: Mechanisms, Shelf-Life Determination, and Safety Standards
Abstract: Food spoilage poses significant challenges to the global food industry, impacting both food safety and economic sustainability. The main causes of food quality deterioration are microbial and non-microbial spoiling. Microbial spoilage primarily results from the activity of bacteria, yeasts, and molds, which thrive under favorable environmental conditions. These microorganisms can lead to food poisoning and spoilage through the production of off-flavors, discoloration, slime formation, and the accumulation of harmful toxins. …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 14, Issue 1, 2025 · pp. 6–9 Read article
-
Envirotech: A Leading Innovation For Future Generation
Abstract: Envirotech or Environmental technology is the usage of environmental science and technology to monitor and conserve the natural environment and resources, and to reduce the negative impacts of human involvement. It involves the purification of the contaminated environment, waste management and production of sustainable energy without harming the nature. It aims to facilitate the human needs without harming the nature. Many technologies are developed to conserve water, reduce waste, produce …
Published in Journal of Control & Instrumentation · Vol. 12, Issue 3, 2021 · pp. 38–44 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
Process Parameters Optimization of Fiber Laser Cladded SS316 Surface Using RSM Analysis
Abstract: This paper presents the laser cladding experiments on the surface of SS316 to study the variations in process parameters, such as scanning speed (100-250 mm/min), laser power (50-250 W), and % volume of B4C (5- 25%) + SS316 powder on the mechanical, metallurgical and tribological performance of the modified surface. A central composite design (CCD) was used to develop the response surface methodology (RSM) to design the experiments and for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 186–201 Read article
-
Polyurethane: Chemistry, Production, Applications, and Future Prospects—An Overview
Abstract: Polyurethane (PU), a class of versatile polymers, has emerged as one of the most significant materials in modern industry owing to its remarkable mechanical strength, elasticity, durability, and resistance to abrasion, chemicals, and environmental degradation. Its wide range of tunable properties has made PU indispensable across multiple sectors, including fashion, automotive, manufacturing, biomedical, coatings, and construction. This review emphasizes the diverse applications of polyurethane and explores how its unique chemistry …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 17–25 Read article
-
Properties and Recent Progress in Oxide-Based Thermoelectric Materials
Abstract: Advanced thermoelectric materials that can be used efficiently for energy conversion have received significant research interest for the last decade because of the mounting demand for sustainable and eco-friendly energy technologies. The main advantage of thermoelectric materials is their capability to directly convert the waste heat into electrical energy which makes them highly promising for the recovery of waste heat from industrial processes, automotive systems and power generation applications. Oxide-based …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 2, 2026 Read article
-
Synthesis, Characterization and Drug Delivery Application of Poly (Acid Fuchsin) Based Triblock Copolymer
Abstract: Synthesis, characterization and its drug delivery application of Poly (acid fuchsin) (PAF) was done under inert atmosphere. The (M0/I0) was maintained at 100. In order to increase the molecular weight and processability, it was block copolymerized with ε-caprolactone (CL) and tetrahydrofuran (THF) separately. The conductivity value of PAF was found to be decreased after the chemical conjugation with poly(ε-caprolctone) (PCL) and poly(tetrahydrofuran) (PTHF) blocks. Thus obtained triblock copolymer was subjected …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 2, 2016 · pp. 33–43 Read article
-
Review on Environmentally Friendly Chemicals
Abstract: Early-career researchers who want to specialize in green chemistry should be interested in training in toxicology, sustainability, and environmental impact assessment of prepared products. The most demanding fields for specialists in environmentally friendly chemistry are industrial fields, especially in the sectors of technology, pharmaceutical industry, biotechnology, and consumer health. They are also in demand in entertainment companies and supply offices. Researchers should also strengthen their marketing abilities, gain a better …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 2, 2021 · pp. 25–31 Read article
-
Detailed Study On Physical Properties Of Silicon Nitride Films Deposited By Plasma Enhanced Chemical Vapour Deposition System
Abstract: Amorphous silicon nitride films have been deposited by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) technique using silane (SiH4) and ammonia (NH3) as source gases. Investigations have been made in detail to understand the influence of process parameters such as RF power, substrate temperature, gas flow ratio, working pressure etc, on the optical, electrical and surface properties in order to obtain dielectric Si3N4 films for semiconductor device applications. Amorphous …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 1–8 Read article
-
Comparative Analysis of MOSFET, CNTFET and NWFET for High Performance VLSI Circuit Design: A Review
Abstract: Nanowires are inimitable materials for considering phenomenon in nanoscale regime. Nanowires development exhibits ample of applications by controlling their, structure, composition as well as their electrical properties. This paper review diverse types of nanowires, nanowire field-effect transistor (NWFET) structure and their comparison with novel devices. Firstly, this paper describes different types of nanowires and nanowire heterostructure that shows nanowire heterostructures eliminates various factors that limit the performance of homogeneous nanowire …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 2, 2016 · pp. 19–32 Read article
-
AI-based Drug Discovery-Revolutionizing Pharmaceutical Research
Abstract: The traditional drug discovery process is often costly, time-consuming, and prone to high failure rates. The advent of Artificial Intelligence (AI) has revolutionized this field by significantly enhancing efficiency, reducing costs, and improving success rates. AI-driven approaches, including machine learning (ML), deep learning (DL), and natural language processing (NLP), have transformed key areas such as drug target identification, molecular screening, lead optimization, and clinical trial design. AI models can analyze …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 12, Issue 2, 2025 · pp. 30–44 Read article
-
Need For Renewable Source of Energy
Abstract: Our(human) demands are accelerating day by day for improving our lifestyles in terms of facilities and resources. For fulfilling these demands globally, we are still largely dependent on non-renewable resources of energy like coal and petroleum (fossil fuel) etc. In recent years, Renewable Source ofenergy is playing very important role in the production of potential energy. But with the unlimited use of fossil fuels, energy crises have arisen, especially in …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 12, Issue 1, 2022 · pp. 14–20 Read article
-
Aspect of Power Transformer Design and Optimization
Abstract: Transformer is one of the most important components of power system. Preliminarily it looksa simple device but from analysis and innovative point of view, it is the big bank ofengineering, which comprises civil, mechanical, chemical and electrical engineering. It is thetime of taking challenges and respective solution of minimizing cost of transformer withoutaffecting customer specifications. This is only possible by design optimization process.Optimization is the process of making something better. …
Published in Trends in Electrical Engineering · Vol. 7, Issue 1, 2017 · pp. 8–18 Read article
-
Exploring Emerging Water Disinfection Technologies: A focus on Hydrodynamic Cavitation
Abstract: Availability of clean drinking water is an ongoing global demand. Contaminated water sources, inappropriate waste disposal, and inadequate hygiene procedures exacerbate it. These elements support the growth of pathogenic microbes like bacteria, viruses, and parasites, which cause a variety of diseases that are transmitted by water. Disinfection plays a vital role in water treatment processes by eliminating these pathogens and ensuring public health safety. Commonly used methods like Chlorination, Ozonation, …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 1, 2024 · pp. 44–53 Read article
-
Atmospheric Modeling: A Comprehensive Review of Numerical Approaches and Applications
Abstract: Atmospheric modeling plays a crucial role in understanding and predicting atmospheric processes, weather patterns, and climate variability. This review synthesizes current methodologies and applications across several types of atmospheric models, including numerical weather prediction (NWP), climate models, air quality models, and chemical transport models. We explore the intricacies of data assimilation, model evaluation, parameterization, and the importance of high-performance computing in advancing model accuracy and efficiency. Special emphasis is placed …
Published in International Journal of Atmosphere · Vol. 1, Issue 2, 2024 · pp. 16–21 Read article
-
Dodecahedron Methane Hydrate Cage Structure – An Ab initio Study
Abstract: Comparative study of 512clathrate hydrate cage having different numbers of methane guest molecules encapsulation is carried out by calculating interaction energy, encapsulation energy and thermo-chemical stability parameters using density functional theory-based calculation with B3LYP functional and 6-31G(d) basis set. Nuclear magnetic resonance spectroscopy(NMR), Infrared spectroscopy (IR spectroscopy) and Raman spectroscopy of empty and methane encapsulated 512clathrate hydrate cages, change in Gibbs free energy and methane hydrate formation enthalpy are predicted …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 51–64 Read article
-
Comparative Evaluation of Dodders, Giloy, Onion Peels and Fruit Waste-Prepared Composite Biochar Polymeric Adsorbent (CBPA) For Use in Wastewater Treatment
Abstract: Due to pollutants that have a negative impact on water bodies, wastewater treatment has attracted a lot of attention throughout the years. In many developing countries domestic and industrial wastewater treatment plants are lacking or not working efficiently for detergents due to the refractory nature of such chemicals. Generally the industrial wastewater is directly discharged into the existing water bodies (drains, nallahs etc.) after primary settling tanks. These refractory contaminants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 72–80 Read article