Search
491 articles for “surface properties”
-
Effect of Heat Treatment on Mechanical Properties of Silver Nanoparticles Embedded in Phosphate Glasses
Abstract: AbstractSilver nanoparticles have been embedded in CaO-P2O5 and CaO-CaF2-P2O5 glasses using melt quenching technique and heat treatment process. The growth of silver nanoparticles in the glass matrix appeared to be time dependent. Mechanical properties such as Vickers hardness, fracture toughness and brittleness for the glass samples were evaluated using a Vickers Indentation technique. Variation in Vickers hardness, Fracture toughness, and brittleness was observed with an increase in the size of …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 3, 2018 · pp. 11–17 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Viscoelastic Behavior and Wrinkle Formation in Cotton- Polyester Garments: A Data-Driven Approach for Textile Care
Abstract: This study investigates the wrinkle behavior of cotton-polyester blended fabrics by analyzing data from over 1,200 store-handled garments. Integrating concepts from polymer chemistry and computer vision, it aims to establish a smart textile care framework based on fiber-specific wrinkle characteristics. The research identifies how cotton’s hydrophilic and non-elastic structure results in increased wrinkling, while polyester’s thermoplastic and crystalline properties enhance wrinkle resistance. Elastomeric fibers like Lycra contribute to wrinkle recovery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 50–60 Read article
-
Extraction of Natural Dye from Red Rose Flowers
Abstract: In this research work, locally available red flowers of the red rose are selected for the extraction of anthocyanin. Ethanol solvent was used to extract anthocyanin from flowers. Different methods are used to obtain natural dyes from flowers. FTIR, pH, and UV tests were performed to characterize the extracted anthocyanin. The pH differential method was used to measure the total anthocyanin content in red rose flowers. The color of the …
Published in Research & Reviews : Journal of Herbal Science · Vol. 14, Issue 3, 2025 · pp. 14–23 Read article
-
Experimental, Analytical and Numerical Study of Energy Absorption Properties of Aluminum Crush Boxes with and without Buckling Initiators (Axial Loading)
Abstract: The crashworthiness in automobile is stated as the capability of a passenger car and its interior arrangements to safe-guard occupants from harm. Whenever an accident occurs, the passengers in the car can be injured due to one of the following reasons: (1) excess acceleration force; (2) physical injury from contact with injurious surfaces, and; (3) exposed to fire, smoke, and chemicals released during accidents. Thus effective crashworthiness design must take …
Published in Journal of Automobile Engineering and Applications · Vol. 4, Issue 2, 2017 · pp. 1–9 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
Recent Advances in Hybrid Polymer–Cement Composites: Interfacial Engineering, Self-Curing Mechanisms, and Microstructural Performance
Abstract: The increasing demand for high-performance polymer-modified cementitious composites has stimulated extensive research into hybrid self-curing composite systems with engineered aggregate phases. Self-curing hybrid polymer–cement composite systems, using recycled aggregates, constitute one of the solutions proposed by researchers to overcome problems related to moisture loss during the curing process, shrinkage, cracking, and the limited amount of natural aggregate available. This critical review provides an overview of recent developments concerning the production, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1323–1332 Read article
-
Effect of Silica Fume on the Engineering Properties of Fly Ash-Based Geopolymer Concrete Using 100% Recycled Concrete Aggregate
Abstract: Construction and demolition (C&D) waste has generated an enormous amount in developing countries like India due to explosive infrastructures and increasing urbanization, causing numerous concerns regarding the environment and economy. Recycling of aggregate from C&D debris is a beneficial approach to sustainable development and a circular economy. In contrast, numerous drawbacks of the integration of recycled concrete aggregates are due to adhered mortar remaining on their surfaces, reducing the strength …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1316–1325 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
Effect of Bismuth doping on Thiourea crystals : A NLO Material
Abstract: Single crystals of pure and thiourea-substituted bismuth were successfully grown using the slow evaporation solution growth technique at ambient temperature. The impact of thiourea doping on the crystal properties was thoroughly investigated. Solubility tests for the grown samples were conducted at various temperatures, providing crucial data on the dissolution characteristics. Structural characterization of these crystals was performed using single crystal X-ray diffraction (XRD), confirming their crystalline nature. Energy-dispersive X-ray spectroscopy …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 10–16 Read article
-
An Overview of Surface Coating Methodologies and Their Use in Technical Materials
Abstract: To safeguard the product or structure against chemical harm, a variety of procedures and materials can be applied in coating applications today. Nowadays, coatings are used extensively in manufacturing all over the world to increase efficiency and reduce expenses two factors that are essential to preserving the sector's profitability. Coated materials have greater strength compared to uncoated materials. A variety of materials, including bio glass, polymers, ceramics, strong and hard …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 19–35 Read article
-
Choking & Corrosion in Biomass Fired Boilers
Abstract: Biomass or Agricultural Waste is being widely projected and Promoted as an alternate to Fossil Fuels. Not only the reserves of Fossil Fuels - Coal and Oil are getting depleted, they are responsible for adding to the menace of pollution. Hence Biomass aptly qualifies as a non-polluting and renewable source of energy. One of the direct and common use of Biomass Fuel is for producing heat by combustion in a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 389–397 Read article
-
Fabrication of MOF5 -GO nanocomposites by tailoring graphene oxide
Abstract: The present paper focusses on the synthesis of graphene oxide and its nanocomposite with metal organic framework (MOF-5). Graphene oxide (GO) was prepared using modified hummer’s method with different concentrations of oxidizing agent to vary the presence of functional group on the surface of GO. The presence of functional group plays a crucial role in determining the interactions between GO and MOFs. To confirm the presence of different functional groups …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 101–114 Read article
-
Eco-Friendly Elixirs: A Critical Review of Biosurfactants for Sustainable Wastewater Solutions
Abstract: Biosurfactants are the amphiphilic substances which are acquired from the remains of the living microorganisms and have attracted a lot of scientific interests because of their applicability in various fields. This review aims at reviewing current research and development on biosurfactants with special emphasis on their application in wastewater and oil. Biosurfactants being less hazardous to the environment are produced by microorganisms and works as a substitute for chemically produced …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 14–33 Read article
-
Enhanced Thermal Conductivity of Polyaniline Nanofluids Synthesized using CuCl2 as Catalyst
Abstract: AbstractThe development of nanofluids for enhancing the heat transfer properties over the conventional fluids is mainly hindered by a vital issue of dispersion stability and hence is being explored in the present work. In the present study, Copper Polyaniline nanoparticle was synthesized by the oxidative polymerization method using CuCl2 as a catalyst. The characterization of Copper Polyaniline was performed. The sizes of nanoparticles were found to be within 7.24 nm …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 20–40 Read article
-
Revolutionizing Geopolymer Composites: Unveiling Intelligent Wall Facades and Precision PZT Sensors for Vibration Analysis
Abstract: Evaluating the mechanical performance and environmental benefits of geopolymer composites is imperative for sustainable alternatives in construction. This study presents an innovative circular PZT-based sensor that effectively captures transient vibrations within concrete structures, demonstrating its validity in comparison to standard surface-mounted accelerometers. The research also elucidates the influence of sensor orientation on capturing various vibrational modes of concrete. Furthermore, the embedded PZT sensors provide valuable insights into the evolving mechanical …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 59–73 Read article
-
Review of the Impact of Artificial Roughness in Solar Air Heaters
Abstract: Artificially roughening the heated surface of solar air heaters is a practical and affordable method to significantly increase the rate of heat transmission. Roughing up the surface can improve the design of a solar air heater (SAH) duct. The use of baffles, fins, ribs and grooves improves heat transmission in the SAH. Various efforts were made to improve heat transfer rates through duct employing these components, which resulted in significant …
Published in Trends in Machine design · Vol. 11, Issue 1, 2024 · pp. 1–9 Read article
-
Preparation and Characterization of Polyolefins/Inorganic Nano-Filler Nanocomposites via Melt Extrusion Process
Abstract: This work used the melt-mixing method followed by compression molding to create nanocomposites of polyolefins, such as high-density polyethylene and linear low-density polyethylene, packed with both surface-modified and unmodified nano-calcite. The study examined the effects of varying concentrations of nano-calcite, which had been modified using isopropyl tri-(dioctylpyrophosphato) titanate, on the mechanical properties, morphological characteristics, and flow behavior of the resulting nanocomposites. A corotational twin-screw extruder was utilized to manufacture three …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 3, 2024 · pp. 35–43 Read article
-
An Overview Study on CO2 Absorption in High-strength Concrete
Abstract: Today, global warming is a major issue facing all over the world. The main reason behind an increase in the effect of greenhouse gas. The emission of carbon dioxide (CO2) from the construction industry contributes 9% to increasing greenhouse gas therefore it is our responsibility to work on the reduction of CO2. In this paper, we study CO2 absorption by using zeolite powder in concrete as a partial replacement for …
Published in Journal of Construction Engineering, Technology & Management · Vol. 12, Issue 3, 2022 · pp. 11–17 Read article
-
Synthesis and Structural Characterization of Nanocrystalline CeO2 and Ce0.95Cu0.05O2 Solid Solution Catalysts: Properties and Applications
Abstract: The main study and the development of CeO2 and Cu-doped CeO2 nanocrystals containing transition- metal species are of crucial importance for understanding the preparation and fabrication of CeO2 and Cu-doped CeO2 nanoparticles by solution combustion technique to taken glycine as fuel. The structural properties of Ce1-xCuxO2 nanocrystals were examined by investigating the influence of cerium dioxide and Cu dopant ions. The CeO2 single-phase cubic system was successfully incorporated with Cu …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 3, 2024 · pp. 29–38 Read article