Search
413 articles for “dynamic simulation”
-
Low-Offset High Speed CMOS Voltage Comparator using 180 nm Technology
Abstract: A low Off-Set high-speed two-stage dynamic comparator is presented. In this circuit, PMOS transistors are used at the input of the first and second stages of the comparator. At the evaluation phase, the second stage is activated after the first stage with a predetermined delay to achieve a controllable pre-amplifier gain. Also, the first stage is turned off after the delay to reduce overall power consumption. Simulation results in 0.18µm …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 3, 2017 · pp. 21–27 Read article
-
Low-Offset High Speed CMOS Voltage Comparator using 180 nm Technology
Abstract: A low Off-Set high-speed two-stage dynamic comparator is presented in this paper. In this circuit, PMOS transistors are used at the input of the first and second stages of the comparator. At the evaluation phase, the second stage is activated after the first stage with a predetermined delay to achieve a controllable pre-amplifier gain. Also, the first stage is turned off after the delay to reduce overall power consumption. Simulation …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 2, 2017 · pp. 21–27 Read article
-
A Review on Structural Design Analysis and Environmental Auditing of Railways
Abstract: In the present time, Indian railway is the major transport medium. It is so efficient, economic, and services are moderate eco-friendly technology. Changes are on the basis of engineering, logistics, time and luxury. The new structure has faced lots of challenges and every day demands led to some changes day to day. In so many years of Indian railway the tracks are challenging and quite tough which carries lots of …
Published in Journal of Energy, Environment & Carbon Credits Read article
-
A REVIEW ON STRUCTURAL DESIGN ANALYSIS AND ENVIRONMENTAL AUDITING OF RAILWAYS
Abstract: In the present time, Indian railway is the major transport medium. It is so efficient, economic, and services are moderate eco-friendly technology. Changes are on the basis of engineering, logistics, time and luxury. The new structure has faced lots of challenges and every day demands led to some changes day to day. In so many years of Indian railway the tracks are challenging and quite tough which carries lots of …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 2, 2021 · pp. 28–39 Read article
-
Power Analysis Comparison of Gated Diode Dram Cell Design on 32 nm Technology
Abstract: In this paper power consumption of Gated diode DRAM (Dynamic Random Access Memory) cells are carried out. This analysis is carried out on 32 nm scale. The DRAM cell used here are 3T1D and 2T1D DRAM cell. Static, total average and transient power for both types of cells are simulated in order to have a comparison of their performance on the same technology. A comparative study of different types of …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 1, 2015 · pp. 19–23 Read article
-
Performance Evaluation of Topology Based Routing Protocols for VANET in City Scenario
Abstract: Vehicular Ad-hoc Networks (VANET) is an emerging technology that will help in increasing road safety of commuters and comfort of passengers. In this paper, we compare various topology based routing protocols Sequence Distance Vector (DSDV), Ad-hoc on Demand Distance Vector (AODV) and Dynamic Source Routing (DSR) that are Mobile Ad-Hoc Network (MANET) protocols for their behavior in VANET networks, that is a subclass of MANET based on few parameters. The …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 3, Issue 1, 2016 · pp. 47–54 Read article
-
Firefly Algorithm–Based Optimization of Processing Parameters for Enhanced Performance of Polymer Composite Materials
Abstract: Polymer composite materials are extensively used in aerospace, automotive, and oil & gas applications due to their high strength-to-weight ratio and design flexibility. However, achieving optimal mechanical and thermal performance strongly depends on precise control of processing parameters such as curing temperature, energy consumption, and material utilization. Conventional trial-and-error approaches often lead to excessive energy usage, non-uniform curing, and sub-optimal composite properties. To address these challenges, this paper proposes an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 90–107 Read article
-
Currents, Waves, and Whirls: An Academic Exploration of Fluid Mechanics
Abstract: Fluid mechanics investigates the behavior of liquids and gases in motion and at rest, revealing the principles that control natural occurrences and engineering systems alike. This article gives an easy review of essential concepts such as fluid characteristics, pressure, flow patterns, and the contrast between laminar and turbulent flow. It explores how fundamental rules, including conservation of mass and energy, impact the transport of fluids across varied settings. Through real-world …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 8–13 Read article
-
Advancements and Challenges in Automated Guided Vehicles for Smart Industrial Automation
Abstract: Automated Guided Vehicles (AGVs) are increasingly central to modern industrial automation, enhancing operational efficiency in manufacturing, warehousing, and logistics. Traditionally reliant on fixed paths using magnetic tapes or wired tracks, AGVs were limited in flexibility. However, recent technological advances have enabled the development of autonomous AGVs equipped with sensor fusion, LiDAR, computer vision, and artificial intelligence (AI). These features support real-time obstacle detection, dynamic path planning, and robust performance in …
Published in International Journal of Advanced Robotics and Automation Technology · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
Overcurrent Elimination and Current Ripple Reduction in Multi- Motor Systems Fed by Reduced Switch-Count VSI Using Advanced Scheme for High-Performance Drive Applications
Abstract: This paper proposed a novel control approach for overcurrent removal and reduction of current ripple for multi-motor systems powered by a Voltage Source Inverter (VSI) with a reduced switch-count. This approach significantly enhances the regulation of armature current with improved performance of the drive while improving the hardware utilization of the inverter. Simulation and analysis showed the capability of the scheme to improve power quality and improve system reliability, making …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 2, 2026 Read article
-
Analyzing Cavitation in Marine Propeller: A Computational Approach with Consideration for Polymer Applications
Abstract: A major source of noise and blade damage in marine propellers is because of the phenomenon of hydrodynamic cavitation. The Computational Fluid Dynamics (CFD) analysis approach is employed for the prediction of the cavitating propeller’s performance characteristics under various conditions of operation with the advance coefficient (J) ranging from 0.55 to 0.91 and cavitation number (σ) in the range of 0.80 to 4.50. The numerical simulation is performed on INSEAN …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 29–44 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Review of application of CFD methodologies used for methane enrichment of natural gas
Abstract: Methane is a major constituent of biogas which contains about 60 – 70% of total volume. For utilization of biogas as fuel, its calorific value is a limitation which can be improved by removing impurities such as CO2, H2S, and moisture. Various techniques are available for the removal of impurities. This paper aims to explore various methodologies in CFD which are used to simulate and find out the factors that …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 44–47 Read article
-
Influence of Mechanical Parameters on Corrosion Behavior of Metal Coupons in Simulated Environmental Conditions
Abstract: This study investigates the influence of mechanical parameters—namely applied stress, surface roughness, and deformation history—on the corrosion behavior of metal coupons exposed to corrosive environments. Mild steel and aluminum alloy specimens were prepared with controlled variations in tensile stress, polishing grades, and cold-working levels to simulate real-world mechanical influences. These coupons were immersed in a 3.5% NaCl solution under ambient conditions, and their corrosion rates were monitored over a 30-day …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 6–12 Read article
-
Design and Manufacturing of Suspension and Steering System of a F3 Vehicle
Abstract: The suspension and steering systems are critical subsystems of any formula-style racing vehicle, directly influencing its stability, handling, and driver safety. This paper focuses on the design, analysis, and manufacturing of suspension and steering systems for a Formula Student F3 vehicle. The primary objective is to develop a lightweight, reliable, and efficient design that complies with Formula Student competition rulebooks while ensuring optimum ride quality and performance. Using advanced computer-aided …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–12 Read article
-
Enhancement of LVRT Capability in DFIG based Microgrids Using STATCOM
Abstract: The improvement of a grid-connected wind microgrid's Low Voltage Ride-Through (LVRT) capability using a Static Synchronous Compensator (STATCOM) is investigated in this research. The increasing penetration of wind energy into modern power systems necessitates advanced control strategies to maintain grid stability during voltage disturbances and fault conditions. In this study, a STATCOM is employed with an effectively tuned PI controller to provide enhanced dynamic response, voltage regulation, and reactive power …
Published in Trends in Electrical Engineering · Vol. 16, Issue 2, 2025 · pp. 44–57 Read article
-
Design of Single Bitline Novel 5T SRAM Cell to Reduce The Power Dissipation Using Cadence
Abstract: Fast growing field of IC technology is persistently demanding for low power consumption and efficient solution. Most of the available SRAM designs are based on standard 6T SRAM cell in addition to other circuit and transistors count. A novel 5T CMOS SRAM is presented in this paper, for simultaneously minimizing power consumption and an improving process speed. The presented unique 5T SRAM cell employs single bitline for read/write function. Implementation …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 1, 2016 · pp. 49–54 Read article
-
An Investigation of Model Predictive Control in Self-driving Vehicles
Abstract: Autonomous vehicles, which are often known as self-driving automobiles or driverless cars, are vehicles that can navigate and operate without human intervention. They require efficient controllers capable of handling complexities, with reduced computational costs, and should handle multiple inputs and outputs simultaneously. Model predictive control (MPC) possesses all these characteristics which means it can be utilized effectively for the same purpose. MPC for autonomous vehicles proposes various ways of achieving …
Published in Trends in Electrical Engineering · Vol. 14, Issue 1, 2024 · pp. 40–50 Read article
-
Dynamic Behavior of Asphalt Stabilized and Grid Reinforced Subgrade Soil
Abstract: The impact of repeated loading (punching shear) on Asphalt stabilized and grid reinforced subgrade soil have been investigated in this study. Specimens of 152mm diameter and 116 mm in height have been prepared, cured, and then tested using the pneumatic repeated load system PRLS. The deformation-load repetitions data were recorded for each case. Data were fed to the finite element software for the modeling process. An assessment was conducted to …
Published in Trends in Transport Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 1–9 Read article
-
AI and ML-Driven Immersive Technologies: A New Era in Education
Abstract: The very fast adoption of Artificial Intelligence (AI) and Machine Learning (ML) in education has transformed contemporary teaching and learning ecosystems driven by advances in immersive technologies and the growing engagement of global technology leaders with virtual environments. AI-powered educational platforms enable adaptive and personalized learning pathways by dynamically adjusting content, pace and instructional strategies to learners’ preferences, abilities and learning styles by improving engagement, retention and academic outcomes. Deep …
Published in International Journal of Education Sciences · Vol. 3, Issue 1, 2026 · pp. 116–123 Read article