Search
267 articles for “substrates”
-
THE THICKNESS EFFECT ON TiO 2 THIN FILMS FABRICATED BY USING SOL- GEL DIP COATING METHOD
Abstract: Titanium dioxide films were prepared by sol-gel dip-coating technique onto glass substrates at room temperature. The study focuses on the structural pattern of TiO 2 films which were dominated by the parameters such as the film thickness, pH, annealing temperature and number of dipping layers. At first the dipping speed is optimized with the refractive index of the film along with the number of dipping layers. Then the film deposited …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 1–10 Read article
-
Reduction of Short Channel Effects with the Variation of Poly Doping and Source/Drain Doping
Abstract: In this paper, the concentration of poly-silicon doping and source/drain doping has been varied to obtain the approximation the OFF state leakage current for N channel MOSFET. A lightly doped NMOS has been designed using 45 nm technology in ATHENA and simulated in ATLAS of SILVACO TCAD tool. After simulation results, it has been observed that as the poly-silicon doping and source drain doping concentrations are decreased, there is a …
Published in Journal of Semiconductor Devices and Circuits · Vol. 4, Issue 3, 2017 · pp. 35–42 Read article
-
Performance Analysis of Fully Flexible Organic Humidity Sensor with Top-Contact and Bottom-Contact OTFTs
Abstract: Abstract: Organic field-effect transistor (OFET) based humidity sensors are extensively used nowadays due to their low cost, mechanically flexible and compatibility with lower temperature fabrication techniques that support the plastic substrate based device and circuit applications. This paper investigates the humidity dependence of performance of organic humidity sensor with Top-Contact and Bottom-Contact OTFTs. Subsequently, impact of channel length on sensor performance is analyzed. The humidity sensitivity of organic sensor drain …
Published in Journal of Semiconductor Devices and Circuits · Vol. 6, Issue 1, 2019 · pp. 26–34 Read article
-
Flip chip package to revive authenticated proclaim
Abstract: This article is described to access optimal manufacture process for flip-chip package. Method of electrical connection has subjected in flip chip to describe interlink of die to package carrier. Connection from die to exterior of package has thus, dealt by package carrier that has been either substrate or lead-frame. Interconnection between die and carrier has made using wire to subject standard package. Nevertheless, advanced technology nodal device fabrication has scriptive …
Published in Journal of Semiconductor Devices and Circuits · Vol. 8, Issue 2, 2021 · pp. 28–33 Read article
-
Synthesis and Characterization of In2S3 Nanoflake Thin Film for Photosensor Applications
Abstract: Indium sulphide (In2S3) thin films in the form of nanoflakes are synthesized by using chemical vapour deposition method on glass substrate with the intension to test its photosensor applications. These as deposited nanoflake thin films are characterized for physicochemical properties using X-ray diffraction (XRD) pattern, energy dispersive X-ray (EDAX) analysis,scanning electron microscopy (SEM) while optoelectronic properties were studied using optical and electrical characteristics obtained through UV-Vis transmission spectroscopy and I-V …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 21–26 Read article
-
Current status of reinforced thermal spray coatings to increase corrosion resistance of boiler tube steels
Abstract: AbstractThermal barrier coatings are one of the best techniques to protect the metal surface from erosion corrosion attach. Aluminium and nickel based alloys are extensively used as thermal barrier coated materials with various techniques such as HVOF, APS etc. The techniques for applying the coatings gain their importance in thermal spray which results to get a layer deposited without affecting the properties of substrate material. Thermal spray coatings have been …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 1–7 Read article
-
Detailed Study On Physical Properties Of Silicon Nitride Films Deposited By Plasma Enhanced Chemical Vapour Deposition System
Abstract: Amorphous silicon nitride films have been deposited by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) technique using silane (SiH4) and ammonia (NH3) as source gases. Investigations have been made in detail to understand the influence of process parameters such as RF power, substrate temperature, gas flow ratio, working pressure etc, on the optical, electrical and surface properties in order to obtain dielectric Si3N4 films for semiconductor device applications. Amorphous …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 1–8 Read article
-
Micro-Stream Jetting Effect of Acoustic Cavitation during Sono-Electroplating of Thin Films: A Morphological Note
Abstract: In this study, copper thin films were electroplated onto laboratory grade aluminum substrate in presence of ultrasound and were then subsequently characterized by scanning electron microscopy. The macroscopic appearance reveals that the surface of the films had micron sized crater like holes. An initial analysis may direct to conclude that the hydrogen evolution might have caused so. However, microscopic examination on hole morphology, the nature of the flow of materials …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 1, 2015 · pp. 15–17 Read article
-
On a Nanocomposite Metal Oxide Thin-film Transistor with Nanofilm Gate Dielectric Material: Material Chemistry, Sol–Gel Process and Electronic Worthiness
Abstract: ABSTRACT : ILO based MOTFT is fabricated with PBZ gate dielectric. PBZ is formed over doped Si substrate by cheap sol-gel process. Thin film PBZ is analysed with XRD, UV-Vis and AFM. IZO is used as bottom gate to contact TFT. This device needs only 5V as operating voltage, and so is good for lower electronics <40V. It shows excellent e-mobility 4.5cm2/V/s, with on/off ratio 5x105 and sub-threshold swing 0.35V/decade.
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 3, 2019 · pp. 8–12 Read article
-
Molebdate as Corrosion Inhibitor for Aluminium 356 In Acidic and Saline Media
Abstract: Corrosion processes are the cause of significant losses in industry. Organic, inorganic, and mixed material inhibitors have all been used to resist corrosion for a long time, but the environmental toxicity of organic corrosion inhibitors has driven a quest for inorganic corrosion inhibitors. The effect of molybdate as a new corrosion inhibitor on the corrosion of aluminium 356 in acidic and saline conditions was investigated using electrochemical and weight loss …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 39–47 Read article
-
Review of Hydroxyapatite Coating: Enhances Bioactivity and Osteoconductivity in Natural Hard Tissues
Abstract: Hydroxyapatite (HA or HAP) of biologically (produced from coral, cattle, or marine algae) or synthetic origin is used to repair and regenerate bone in the form of granules, blocks, and scaffolds, either alone or in a composite with polymers or other ceramics, or as a coating on dental or orthopedics implants. From the perspective of enhancing bioactivity, numerous methods for surface alteration and its combinations have been suggested. The composite …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 17–21 Read article
-
Frictional properties of thermally processed electroless nickel coatings
Abstract: Electroless plating was used to deposit the nickel (Ni) coatings on the carbon steel substrate, both with and without incorporated cubic boron nitride (c-BN) nanoparticles. Coatings were put through tests under both heat-treated and as-deposited conditions. In addition to measuring hardness and roughness, the coating structure was characterized. Under dry and water lubricated contact circumstances, the friction characteristics of bronze, used as the counter-body material, were investigated. coefficients of friction …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 27–31 Read article
-
Application and Limitation of Metal Thermochemical Processing
Abstract: The technically intriguing and monetarily feasible technique for enhancing the surface layer of materials is surface engineering. The aim is to establish a vast scope of useable attributes that are separate from the core substrate, together with physical, chemical, electrical, electronic, magnetic, or mechanical, even though the material surface monitors the operational life throughout many implementations. The thermochemical intervention, a type of surface engineering, uses heat diffusion to incorporate non-metal …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 3, 2022 · pp. 25–29 Read article
-
Effect of Sol-Gel Coating on Fire Performance and Optical Properties of Wood Panels
Abstract: Investigates the impact of sol-gel coating on the fire performance and optical properties of wood panels.SEM, EDX, and infrared spectroscopy with the Fourier transform were used to characterize the sol-gel coating, which was put on to the wood panels using a dip-coating technique. The fire performance of the coated and uncoated wood panels was evaluated by measuring the ignition time, flame spread rate, and total heat release rate. The optical …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 20–24 Read article
-
A Slotted Fabric Antenna for Broad Band Application
Abstract: This article is presented a compact slotted textile patch antenna for broadband applications. The presented antenna is designed on textile substrate with dielectric constant of 1.7 and the anticipated antenna is compact size. It has been simulated using CST too and measurement is done with network analyzer. It covers a bandwidth of 6.45 GHz extending from 2.85 GHz to 9.30 GHz. It has maximum directivity of 2.932 dBi. The measured …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 2, 2017 · pp. 10–14 Read article
-
Microstrip Textile Antenna for S-band Applications
Abstract: In this article, the proposed textile antenna has been studied with better results, high directivity, high gain, good return loss and multiple bands are obtained for wide range of applications in S-band with multiple bands. The substrate material of the proposed antenna is a jean which is a flexible material, the patch and partial ground plane is of copper. There is a modification in proposed textile antenna design with the …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 2, 2017 · pp. 27–31 Read article
-
Designing of Ultra Wide Band Microstrip Antenna using Triple Slotted Patch and DGS
Abstract: AbstractIn this paper, an antenna is designing for Ultra Wide band that is 32.86 GHz is achieved which is very large bandwidth covering maximum application of wireless network. Initially a normal rectangular microstrip patch antenna with microstrip transmission line feed is designed. By using parallel slots in MSL feeding technique very wide bandwidth is achieved than simple design without parallel slots. Maximum impedance matching and good VSWR is achieved in …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 3, 2018 · pp. 12–19 Read article
-
A Circular Slot Loaded H-Shaped Printed Microstrip Patch Antenna for Lower Band 5G Applications
Abstract: Abstract: A circular slot loaded H-Shape patch antenna is introduced in this paper. A circular slot loaded H-Shape patch antenna is fed with coplanar wave guide (CPW) is discussed which is applicable for lower band 5G applications. The radiation pattern is omni-directional which is very near to H-plane. The area of ground plane is 80×101×1.5 mm3 with substrate material having dielectric constant 2.2 and loss tangent 0.002 is used. The …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 1, 2019 · pp. 9–14 Read article
-
Design of a Stacked Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: The paper presents a stacked T-shaped Aperture coupled microstrip antenna designed for ultra-wide band wireless applications. The proposed UWB antenna covers two frequency bands as of 2.49 to 2.9 GHz and 6.85 to 20 GHz and used for the various applications like Bluetooth, Zig-Bee (2.4 GHz), C band (6 to 8 GHz), X band (8 to 12 GHz), Ku band (12 to 18 GHz) and Satellite communication. The stacked antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 12–16 Read article
-
Broadband Rectangular Top Shaped Slotted Antenna at 2 GHz for WLAN Application
Abstract: The present study is regarding the design of a broadband rectangular top shaped slotted microstrip antenna with linear polarization radiation. The glass epoxy dielectric material is used for substrate and single rectangular microstrip radiating patch. Rectangular antenna is designed for WLAN technology. We first analyze the characteristics of microstrip antenna and design for the high bandwidth. The results show that the proposed antenna is able to achieve a bandwidth of …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 1, 2015 · pp. 1–4 Read article