Search
1362 articles for “performance testing”
-
Study of Nanoindentation Characteristics of Al/B4C/CNT Composites
Abstract: Nanoindentation characterization is one of the essentialities that are used in current work to measure hardness and elastic moduli properties of Al reinforced with B4C particulates and carbon nano-tube (CNT). The nanoindentation characterization enables measurements of mechanical characteristics on nano scale. The method is very effective to understand the localized variations in mechanical behavior of the composites that are influenced by precipitation of reinforcements. The composites were synthesized en-route powder …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 6, Issue 2, 2016 · pp. 7–12 Read article
-
Node MCU-based Obstacle Avoiding Car
Abstract: The utilization of autonomous technology for performing important tasks is increasing due to its high efficiency and reliability. Our proposed autonomous vehicle is designed to be equipped with the capability to detect obstacles in its path, adjust its route to avoid any potential collisions, and eventually reach its destination. The ultrasonic sensors play a crucial role in this setup by providing the vehicle with the necessary information to detect obstacles …
Published in Journal of Mobile Computing, Communications & Mobile Networks · Vol. 9, Issue 3, 2022 · pp. 23–29 Read article
-
Polymer-Based Nanocomposite Coatings for Enhancing Solar Photovoltaic Panel Efficiency
Abstract: Environmental factors such as dust deposition, ultraviolet (UV) radiation, and surface reflection significantly reduce the performance of solar photovoltaic (PV) modules. This study investigates the development and performance evaluation of polymer-based nanocomposite coatings designed to improve the optical and surface properties of PV panel glass. A hybrid nanocomposite coating containing TiO₂ and SiO₂ nanoparticles dispersed in a polymethyl methacrylate (PMMA) matrix was synthesized using the sol–gel technique and deposited through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 490–497 Read article
-
Optimized Hardware Realization of AES for High-Throughput FPGA Platforms
Abstract: The Advanced Encryption Standard (AES) is the predominant symmetric-key cryptographic algorithm used for securing digital communication across embedded systems, IoT devices, cloud infrastructures, and defense networks. Although software-based AES implementations offer flexibility, they often fail to meet the high-speed, low-latency, and energy-efficient requirements of modern real-time applications. Reconfigurable hardware platforms such as Field-Programmable Gate Arrays (FPGAs) provide a powerful alternative by enabling architectural customization, intrinsic parallelism, and optimized hardware acceleration. …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 3, Issue 2, 2025 · pp. 11–22 Read article
-
Steel Structural and Functional Characteristics Focusing on Corrosion Mechanisms
Abstract: This research article examines steel structural and functional characteristics, focusing on corrosion mechanisms and inhibitor protection strategies. Steel corrosion affects numerous industries, causing significant economic losses and safety risks. Fundamental electrochemical processes behind various corrosion forms including uniform, pitting, crevice, galvanic, intergranular, and stress-induced corrosion are explained. The chapter highlights the steel industry's importance while investigating how corrosion impacts performance and longevity. Protection methods discussed include material selection, environmental modification, …
Published in International Journal of Minerals · Vol. 2, Issue 2, 2025 · pp. 25–34 Read article
-
Evaluation of Impact Strength and Hardness for Polymer Matrix Composites with Steel, Carbon and Glass Reinforcements for Automotive Applications
Abstract: Polymer matrix composites (PMCs) play a crucial role in a wide range of engineering submissions, owing to their impressive strength-to-weight ratio and customizable mechanical properties. This research focuses on examining how PMCs, enhanced with different materials, specifically carbon fibres, glass fibres, and steel fibres, behave when subjected to dynamic and static loading conditions. The study involves creating three distinct types of PMC specimens, each reinforced with one of the mentioned …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 738–748 Read article
-
U-Net Based Approach for Automated Brain Tumor Classification
Abstract: Brain tumor detection and identification play vital roles in diagnostic procedures in the field of medicine, with the conventional analysis of MRI images requiring a lot of time and also subject to variability. The proposed study involves the use of a CNN-U-Net based approach for brain tumor detection and identification automatically. The study uses a database of 3,064 contrast-enhanced T1-weighted MRI images from 233 patients with the tumors of meningioma, …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 14, Issue 2, 2025 Read article
-
An Arduino-Based Autonomous Serving Robot with GPS Navigation for Cost-Effective Service Automation
Abstract: Robots built for service are no longer confined to research labs or luxury hotels; they are starting to appear in everyday spaces where speed and consistency make a real difference. In a restaurant, for example, a robot that can deliver meals and clear trays reduces staff workload, while in hospitals it can free nurses from routine errands. Schools, too, can benefit by using such machines for both practical and teaching …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 4, Issue 1, 2026 · pp. 13–17 Read article
-
Multi Response Optimization in Friction Stir Welding Al 7075/SiC/10% Metal Matrix
Abstract: The aim of this investigation is to determine the effect of Friction Stir Welding process parameters such as tool rotational speed, weld speed, tilt angle and tool geometry on Al7075/10%wt./SiC Metal matrix Composite. Composites were prepared by the mechanical stir casting process. L27 orthogonal array was chosen for the experimental design. The response characteristics as tensile strength (UTS ) and hardness (VHN) were measured and optimized with Taguchi based grey …
Published in Journal of Automobile Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 30–38 Read article
-
CuO/TiO2 Nanocomposites: Effect of Calcination on Photocatalytic Hydrogen Production
Abstract: Hydrothermally synthesized TiO2 nanorods were subjected to calcination from 350 to 550 °C and tested their catalytic performance for hydrogen (H2) production in aqueous glycerol solution under solar irradiation. High rate of H2 evolution ca.300 µmol.h−1.g−1cat was recorded with TiO2 nanorods calcined at 500 °C. The nanocomposites were prepared by varying Cu-loading 0.1 to 2.0 wt% and activated at 350 or 500 °C. About 25 folds enhancement in H2 production …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 2, 2014 · pp. 13–20 Read article
-
Investigation of Jute Mat with Waste Fish Net by Varying Matrices in Hybrid Composites
Abstract: AbstractIn this study the low cost material of multi filament waste fish net and jute fibres were incorporated as the main reinforcing materials with epoxy resin and polyester resin as the matrix in order to increase the strength of the hybrid composites. The samples were fabricated using hand layup technique. The nylon fibre of waste fish net possesses high impact strength, elasticity property and highly resistant to abrasion of chemicals …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 27–34 Read article
-
Threats and Attacks on WirelessHART Network in Industrial Control Systems
Abstract: The communication between two devices can be secure and maintain the integrity of the data in which the network protocol plays an important role in the same. Due to the different requirement in the industrial needs make difficult to maintain one standard which lead to the attacks like packet injection and denial-of-service. This paper describes the WirelessHART Protocol (Wireless Highway Addressable Remote Transducer Protocol) based vulnerabilities in order to perform …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 8, Issue 1, 2021 · pp. 33–41 Read article
-
Effect of Size of Crushed Ceramic Tiles as Fine Aggregates in Cement Composites
Abstract: Recent studies have shown marked upsurge of waste production where ceramic contributes to 30% waste production in ceramic industry. Research on ceramic waste as partial substitute for fine aggregate has not been fully exploited. A focused investigation is made to check whether the ceramic waste having particle size same and lesser than fine aggregates as partial substitute in cement mortar and concrete. Ceramic waste collected is crushed into required sizes …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 46–53 Read article
-
Development of cruise control for two wheelers
Abstract: In the modern day automotive autocruise control system there is a control loop which controls the throttle that is usually controlled by the driver with the handle lever, and maintains the speed of the vehicle at a preset speed which offers safety and fatigue less drive to the driver. In the proposed work, throttle valve of the carburetor is operated in two ways, manually by throttle handle and automatically by …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 100–104 Read article
-
The Science of Pesin: The Wonder Drug of Siddha System of Medicine
Abstract: To understand the bioavailability and rate of dissolution of the wonder drug, Pesin was evaluated through an in house developed innovative method. The advantage of method was that the test can be performed on table top just with the help of beaker and glass rod. The findings of the study clearly prove the fact Pesin is indeed a wonder drug. The finger print pattern of Pesin was also established using …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 4, Issue 1, 2017 · pp. 7–10 Read article
-
Time Series Forecasting of Electricity Consumption: A Comparative Analysis of ARIMA and SARIMA Models
Abstract: Accurate electricity demand forecasting plays a vital role in energy planning, efficient power system operation, and sustainable resource management. This study conducts a comparative evaluation of the Autoregressive Integrated Moving Average (ARIMA) and Seasonal Autoregressive Integrated Moving Average (SARIMA) models using ten years of monthly electricity consumption data collected from a national electricity regulatory authority. The performance of both models is assessed using forecasting accuracy metrics, including Mean Absolute Error …
Published in Research & Reviews : Journal of Statistics · Vol. 15, Issue 2, 2026 · pp. 43–53 Read article
-
Aerator Monitoring System for Fisheries Using Internet of Things
Abstract: To manage aquaculture effectively, we need to monitor water quality constantly. This helps prevent the depletion of dissolved oxygen, which can lead to fish suffocating. Such monitoring is especially critical in intensive pond systems. If we ignore this and fail to take action quickly, we risk losing all our fish, resulting in high costs that could have been avoided. This paper introduces a low-cost Internet of Things (IoT) based aerator …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 14, Issue 2, 2025 · pp. 1–8 Read article
-
Design and Implementation of Security System for Medical Test Data Mining
Abstract: The growth of data mining process began when company data was first stored on computers, unrelenting with improvements in data access. Data mining deals with bulky database which may hold insightful information. Medical test security system is a major factor in our society especially this system is used for special purpose like inspection of many healthy man powers for a specific organization. In this project software is implement which is …
Published in Journal of Advanced Database Management & Systems · Vol. 1, Issue 1, 2014 · pp. 9–12 Read article
-
GPU Based Non-Serial Polyadic Dynamic Programming Template
Abstract: AbstractNon-serial polyadic dynamic programming algorithms are used to solve combinatorial optimization problems like optimal polygon triangulation, optimal matrix multiplication and RNA secondary structure prediction using Zuker algorithm. They have irregular data access patterns and are complicated dynamic programming algorithms. Each computation is dependent on multiple entries computed earlier in the process. We provide a GPU based algorithm template that is optimized for non-serial polyadic dynamic programming algorithms. This template requires …
Published in Recent Trends in Parallel Computing · Vol. 4, Issue 3, 2017 · pp. 29–39 Read article
-
Analysis of Pressurized Water Reactor Fuel Rod Using Nano Fluid
Abstract: The project aims at analysing the flow through a PWR Nuclear Fuel Rod. In this analysis, fuel rod is simulated using ANSYSCFX 14. Fuel Rod is simulated along with the Spacer Grid. The project aims at studying the behaviour of nano fluids under laminar flow conditions and its application as Nuclear reactor coolants. The properties of two nano fluids have been studied-Al2O3 and CuO with water as base fluid. Their …
Published in Journal of Nuclear Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 14–25 Read article