Search
1057 articles for “parameters”
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Electromagnetic Transients in Strongly Non-Uniform Overhead High Voltage Lines
Abstract: This paper addresses the electromagnetic transients in high strongly non-uniform overhead voltage lines. For their simulation, a novel Laplace-domain approach has been introduced. The voltage and current patterns in terms of location and complex frequency are determined by a set of simultaneous algebraic and partial differential equations. To solve them numerically, an effective Mathematica code is proposed. By contrasting the outcomes of their application to multiple case studies with those …
Published in Journal of Power Electronics and Power Systems · Vol. 15, Issue 1, 2025 · pp. 30–36 Read article
-
Optimization Of Mechanical Properties Of 500/7 Grade Ductile Cast Iron (DCI) By Using SMAW: Applications In Reinforced Composites And Thermoplastics Through Taguchi & GRA
Abstract: Welding, a critical manufacturing process, is broadly engaged to join metals and thermoplastics using heat, pressure, or both. This study inspects the Shielded Metal Arc Welding (SMAW) method to optimize welding parameters and improve the mechanical properties of Ductile Cast Iron (DCI) grade 500/7, a material widely used in high-strength and thermal conductivity applications in aerospace and automotive sectors. Using an L9 OA (orthogonal array), experiments were conducted on nine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 204–222 Read article
-
Enhancing Performance of Hybrid Natural Fiber Reinforced Polymer: Insights into Processing, Characterization and Machining
Abstract: Natural fibre reinforced polymer composites (N-FRP) have gained popularity in recent years as an alternative to regular polymer composites, owing to growing environmental concerns. Natural fibers are becoming increasingly popular due to their outstanding properties such as flexibility, strength, compatibility with living creatures, and impact resistance. A notable application of natural fibers is in the medical industry, with the goal of producing cost-effective, sustainable, and long-lasting products. Combining different fibers …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 139–153 Read article
-
Soil Salinity Assessment and Irrigation Water Quality of Humbo Woreda, Wolaita Zone, South Ethiopia
Abstract: Soil salinity affects the majority of Ethiopia's irrigated farmland, and chemical properties of irrigation water quality have major role in assessing the irrigation land salinity. The study has the objective of determining the soil salinity and irrigation water quality. The study was conducted in Humbo Woreda, Wolaita Zone in the South Peoples’ Regional State. The study used standard analytical techniques and methods to analyze different physiochemical parameters of both irrigation …
Published in Journal of Water Resource Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 38–51 Read article
-
Mathematical Modelling on Unsteady Blood Flow and Unsteady Heat Transfer Through a Stenosed Artery with Hematocrit and Slip Velocity
Abstract: A theoretical investigation concerning variable viscosity dependent on percentage concentration of red blood cell interm of total volume of blood (hematocrit) and slip velocity on unsteady flow of blood and heat transfer has been carried out. The analytical expressions for the flow characteristics and the heat transfer rate, including the velocity profile, volumetric flow rate, flow resistance, wall shear stress, and temperature profile, were obtained using the weighted residual method, …
Published in Research & Reviews: Discrete Mathematical Structures · Vol. 12, Issue 2, 2025 · pp. 16–36 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Physico-Chemical Soil Analysis: A Scientific Approach to Life on Land and Terrestrial Ecosystem Conservation for Supporting SDG 15 Goals
Abstract: Soil health and fertility evaluation are foundational elements in the sustainable management of ecosystems and the enhancement of agricultural productivity. Accurate assessment of soil properties, especially Carbon (C), Nitrogen (N), and Phosphorus (P), is critical for informed decision-making in agriculture and environmental conservation. However, traditional laboratory methods for analyzing these essential nutrients often involve significant resource allocation and time commitments, making them less practical for large-scale or time-sensitive applications. To …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 1, 2025 · pp. 25–23 Read article
-
Analysis of Friction Stir Welding Utilizing ANSYS: A Study Based on Simulation
Abstract: Friction Stir Welding (FSW) represents a sophisticated solid-state welding methodology that has attracted considerable scholarly attention due to its efficacy in amalgamating high-strength, lightweight substrates including aluminium, magnesium, and titanium alloys. FSW enables the fabrication of defect free products with a substantial amount of mechanical and wear properties. The process is highly sensitive to various parameters that significantly influence the quality and strength of the final product. Studies have shown …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 62–77 Read article
-
Analysis of Simply Supported and Clamped-Clamped Beam Resting on a Pasternak Foundation Subjected to Moving Load with a Damping Term
Abstract: A comparative analysis of simply supported and clamped-clamped Bernoulli-Euler beams resting on a Pasternak foundation under the action of a concentrated moving load with a damping term, when the inertia effect of the moving load is considered in its analysis, was investigated in this study. The governing equation was solved by representing the Dirac delta function through a Fourier cosine series and applying a combination of analytical techniques, including the …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 42–59 Read article
-
Passenger car fuel economy: Insights from big data analytics
Abstract: The increasing availability of real-world vehicle telematics through On-Board Diagnostics II (OBD-II) systems has enabled data-driven evaluation of passenger car fuel economy beyond conventional laboratory-based test cycles. While standardized certification procedures ensure repeatability, they often fail to capture the influence of real-world traffic conditions, driver behaviour, and transient vehicle operation. This study presents a structured Big Data Analytics (BDA) approach for analysing high-frequency OBD-II data collected from a gasoline passenger …
Published in Journal of Automobile Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 8–19 Read article
-
Development of a Novel Analytical Framework for Investigating Non-Symmetric Deformation Behavior in Strip Rolling
Abstract: In recent years, the asymmetrical rolling process has attracted considerable research attention due to its ability to induce non-uniform deformation characteristics within metallic workpieces. In this context, the present study introduces a novel analytical framework for asymmetrical cold rolling based on an enhanced slab method, specifically designed to overcome the inherent limitations of existing analytical models when applied to a wide range of asymmetric rolling conditions. A newly developed mathematical …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 1–21 Read article
-
AI-Assisted Gain Scheduling for Real-Time Temperature Control in Chemical Reactors
Abstract: Temperature control in continuous stirred-tank reactors (CSTR) represents a critical challenge in chemical process industries due to inherent nonlinearities, time-varying dynamics, and parametric uncertainties. Conventional proportional-integral-derivative (PID) controllers with fixed gains often fail to maintain optimal performance across varying operating conditions, leading to temperature excursions that compromise product quality and safety. This paper presents a novel AI-assisted gain scheduling framework that integrates artificial neural networks (ANN) with adaptive PID control …
Published in Journal of Control & Instrumentation · Vol. 17, Issue 1, 2026 · pp. 24–33 Read article
-
Process Capability Optimization of Thermoplastic Polyurethane (TPU) Printed Parts in Fused Deposition Modeling Process
Abstract: Fused Deposition Modelling (FDM) 3D printing process requires precise printed dimensions with a special assessment of process parameters using Taguchi optimization methodology. The proposed research aims to determine the optimal parametric setting to maximize the process capability index of diametral deviation and roundness of product in 3D printing process of TPU (thermoplastic polyurethane). The input factors for printing TPU in this research include the extrusion temperature, cooling fan speed, infill …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1846–1864 Read article
-
CFD Analysis of Double Diffusion Rotating Flow in a Cylindrical Annular MHD Braking System with Joules Heating and Dufour Effects
Abstract: The present study has investigated Joules parameter significance on an axisymmetric whirling flow within a cylindrical annulus, specifically focusing on an MHD braking system. The cylindrical annulus braking system is packed lithium lid liquid (Pr = 0.015), aspect ratio = 2, and imposed to an axial heat and magnetic field. In this study, the modified MAC pressure correction method has been used to solve the mixed convection flow with double …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1448–1462 Read article
-
A Study on Fracture Sem Analysis by Optimization of FSW When a Composite Material Al 6061 Mixed with Fly Ash is Done with Cooper Using Anova Method
Abstract: The current study aims to examine how different parameters in friction stir spot welding influence hardness and tensile strength, while identifying the most suitable parameter combinations to enhance the overall quality of the fabricated components. The experimental work involves joining dissimilar materials, where one specimen consists of Aluminum alloy 6061 reinforced with 10% fly ash, and the other is a copper alloy. Various process conditions are altered during testing to …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
Optimization of a new Bebq2/BCP-based OLED structure for optimum performance
Abstract: Opto-electronic devices exhibit highly nonlinear current–voltage (I–V) characteristics that significantly affect charge injection, transport, and recombination, evaluating their performance remains a difficult challenge. Device optimization is a key research goal in organic light-emitting diodes (OLEDs), as the thickness and arrangement of individual functional layers greatly influence electrical and optical responses. For a suggested Bebq2/BCP-based OLED structure, this work methodically examines the movement of charge carriers, their transport behavior, and the …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 2, 2026 Read article
-
Activating agents control the morphology of activated carbon materials from biomass
Abstract: The stems of the plant Calotropis gigantea (Cg) were were used as a feedstock for the activated carbon material. Carbonate (K 2 CO 3 ) and oxalate (Na 2 C 2 O 4 ) were used as chemical activating agents. The morphological features of the activated carbon materials were characterized using FEG-SEM. The morphology of the activated carbon materials is found to depend on the type of activating agent used. …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 1, 2025 · pp. 27–38 Read article
-
A Factorial Investigation of Hyperparameter Tuning Strategies for Lasso- Based Genomic Prediction
Abstract: In an earlier comparative study of machine-learning methods for genomic prediction of wheat grain yield, we reported a counter-intuitive result: automated nested-cross-validation tuning of the Lasso regularization penalty reduced mean predictive ability relative to a fixed, arbitrarily chosen penalty (mean Pearson r falling from 0.408 to 0.349 across four environments), the opposite of the expected effect of hyperparameter tuning. We hypothesized two possible explanations at the time — high-variance penalty …
Published in Research and Reviews : Journal of Computational Biology · Vol. 15, Issue 2, 2026 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites Read article