Search
246 articles for “finite-element analysis”
-
Seismic Response of Braced RC Elevated Water Tanks for Various Seismic Zones
Abstract: In this paper, a reinforced concrete elevated water tank with a capacity of 500 cubic meters and h/d ratio=0.7 is considered, the present study investigate the performance of elevated water tank using dynamic analysis, i.e., Response Spectrum method. The modeling of elevated water tank is carried out by using finite element base software STAAD.Pro. Total twelve number of model were made for empty tank, half tank and full tank condition, …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 43–64 Read article
-
Detection of Eccentricity Fault for Induction Motor
Abstract: The study shows that 80% of faults are because of eccentricity in induction motors, advancing numerous research endeavors still gave to the eccentricity in these motors. In this paper, an asynchronous motor under static and dynamic eccentricities with various load levels is modeled utilizing using finite element method (FEM) as FEM is utilized as an intense numerical technique for analysis of defective induction motors. The simulation outcomes demonstrate that due …
Published in Trends in Electrical Engineering · Vol. 8, Issue 2, 2018 · pp. 19–32 Read article
-
Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V
Abstract: Wind load is one of the most critical factors influencing the design and serviceability of high-rise reinforced concrete (RCC) buildings. As building height increases, wind-induced effects such as storey drift, lateral displacement, and structural stiffness become dominant design considerations. Numerous studies have been conducted using conventional and advanced techniques such as Finite Element Method (FEM), Computational Fluid Dynamics (CFD), and Building Information Modelling (BIM). However, limited research focuses on comparative …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 · pp. 27–41 Read article
-
Static and Dynamic Analysis for Optimum PZT Positioning and Optimum Voltage in a Delaminated Smart Composite Beam
Abstract: This paper conducts a comprehensive static and dynamic analysis of a delaminated composite beam with and without a piezoelectric layer making use of the principle of minimum potential energy. A new finite element model for composite laminate with delamination defect using cohesive zone method is developed using ANSYS APDL. A lead zirconate titanate (PZT) patch is embedded over the delaminated model following the results obtained from static analysis. The work …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 13–27 Read article
-
Free Vibration Analysis of Circular Perforated Laminated Plates
Abstract: This study investigates the free vibration characteristics of circular perforated laminated composite plates. A finite element model is created to analyze the effects of perforation patterns, hole sizes, and laminate configurations on the natural frequencies and mode shapes of these structures. The model incorporates shear deformation theory and accounts for the anisotropic nature of composite materials. Parametric studies were held to examine how varying perforation geometries, including hole diameter, spacing, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 281–296 Read article
-
Free Vibration Analysis of Laminated Composite Plates with Circular and Non-Circular Cutouts using FEM
Abstract: This paper presents the free vibration analysis of a composite laminated plate with circular and non-circular cutouts, using finite element method (FEM). A number of examples concerning different aspect ratios, different thickness ratios, different values of material properties, different size of cutouts, different number of layers and different boundary conditions are considered. Convergence study has been carried out by comparing the results obtained to the numerical results available in the …
Published in Journal of Automobile Engineering and Applications · Vol. 4, Issue 1, 2017 · pp. 1–9 Read article
-
Design and Analysis of Dispersion Flattened Low Loss Photonic Crystal Fiber
Abstract: AbstractThis paper demonstrates the study of triangular lattice hexagonal photonic crystal fiber with GeO2 doped core. The photonic crystal fiber (PCF) studied in this research work has a core doped with 97% molar concentrated GeO2 with seven layers of air-capillaries around the core. The design and analysis of optical characteristics, i.e., dispersion, confinement loss, and effective area have been studied extensively for optimizing the structure for a certain range of …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 2, 2017 · pp. 41–50 Read article
-
Comparative Study of Multistorey Building with Composite Column at Soft Storey
Abstract: Increase in population, car parking space is major concern. Hence, trend has been set up to use ground floor for parking purpose. Literature shows that, large number of reinforced concrete (RC) building with soft storey damaged by earthquake shaking due to many structural deficiencies such as, column with insufficient confinements, strong beam weak column, formation of plastic hinge at beam-column joint, opening of 90 degree ties, poor detailing in beam-column …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 37–42 Read article
-
Bending Stress Analysis of Involute Helical Gear and Wildhaber-Novikov Gear
Abstract: This paper presents a bending stress analysis for Wildhaber-Novikov circular-arc gear (W-N gear) and involute helical gear. Bending stress analyses performed are under continuous load transmission during rotation using finite element method. Using CATIA V5 R19, three dimensional W-N gear and involute helical gear are modeled by considering same number of teeth, module, helix angle, pressure angle and face width. Then nonlinear contact analysis was conducted on involute helical gear …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 2, 2014 · pp. 17–21 Read article
-
Analysis of an Extradosed Bridge with Single Plane Cable System
Abstract: The extradosed bridge is a bridge that combines elements of a cable-stayed bridge and a prestressed concrete box-girder bridge. This innovative design offers several advantages, including improved aesthetics, reduced construction costs, and enhanced durability. The extradosed cable system provides additional support to the bridge deck while maintaining a lower overall height compared to traditional cable-stayed bridges. This feature makes extradosed bridges particularly suitable for environments where height restrictions are a …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 25–31 Read article
-
Experimental Analysis and Validation of Cellulose Fibre Insulation Structures Considering Thermal Properties
Abstract: Cellulose fibre insulation structures made from used newspaper can be installed in attics, filling gaps between doors and windows. Many researchers focused on loose-filled cellulose fibre insulation. This study investigates the thermal conductivity, R- Value and thermal transmittance of cellulose fibre insulation manufactured from recycled cellulose materials with densities ranging from 280 to 360 kg / m³ and specimen thicknesses of 10 – 30 mm. A total of 25 structures …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Fluid-Structure Interaction Simulation of Parachute by Eulerian-Lagrangian penalty method
Abstract: In general, modeling and simulation of a model consisting of fluid and solid combinations has been considered difficult, and it has become impossible in terms of computer dependencies and accuracy to be analyzed by Fluent or other programs. The parachute evaluation process, which is historically based on a large amount of experimental data, necessitates many falling experiments. These tests can be costly and time-consuming, and they don't always allow for …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 2, 2024 · pp. 15–22 Read article
-
Analysis of Infilled Wall Frame for Evaluation of Multiplication Factor
Abstract: Masonry infilled reinforced concrete (RC) frames are the most common type of structures which is used for multi-storeyed constructions in the developing countries like India, even those theseare located in seismically active regions. Masonry infill walls are frequently used as interior and exterior wall in reinforced concrete (RC)buildings. Infill wall protects the internal of the buildings from the environment hazards. Masonry infills are normally considered as non-structural elements and their …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 31–36 Read article
-
Numerical Prediction of Shear Modulus of Multi-Layer PUF Cored Sandwich Composites
Abstract: The present numerical investigation was mainly concerned with the evaluation of apparent shear modulus (Gc) of multi-layered polyurethane foam cored sandwich beams using a novel approach through the medium of general purpose program i.e. FEM/ANSYS. Aiming to the goal, three-point bending analysis was performed on sandwich beam models made up of composite face sheets and multi-layer polyurethane foam cores of different layer densities. Finite element models of sandwich beams were …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 53–61 Read article
-
Design and Analysis of a Low Loss Polarization Maintaining Waveguide for Transmission of THz Waves
Abstract: AbstractThis paper presents the design of a novel porous core kagome lattice photonic crystal fiber (PCF) which acts as a low loss and polarization maintaining teraheartz (THz) waveguide. Using finite element method (FEM), properties of the proposed PCF are simulated in details including the effective material loss (EML), confinement loss, single mode propagation. Cyclic olefin copolymer, also known as TOPAS material have been chosen for the air micro structured inhibited …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 3, 2016 · pp. 13–22 Read article
-
Assessment of the Reinforced Slope Stability Under Earthquake Loading
Abstract: Failure of the soil slopes by dynamic excitation is one of the most vital geotechnical earthquake hazards which may lead to serious destruction to the bridge abutments, dams, embankment, and structures resting on the slope. Moreover, due to deficient space available for the construction of slopes in urban areas, high and steep slope is constructed by geotextile reinforcement slopes. In this study, numerical modelling is made to study the behaviour …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 2, 2021 · pp. 29–37 Read article
-
A Novel Antenna Design based on a Single UC-PBG Layer of High Gain for Wireless Power Transfer
Abstract: In this study, a brand-new, highly effective antenna design is put forth to provide a directional radiation pattern with a small beam width for wireless power transfer. The proposed antenna is constructed from a cross-shaped patch of square holes. A favorable eclipse is paired with the antenna patch to provide circular polarization-symmetrical radiation. A symmetrical quadrature stare-shaped unit cell has a uniform compact photonic bandgap layer (UC-PBG) on top of …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 3, 2022 · pp. 8–19 Read article
-
Study of Structures Considering Second Degree Analysis P-delta and Construction Sequence Analysis
Abstract: Infrastructure plays an important, rathernecessary role in modern society.Real estate amenities surrounding to us give everyone access to multiple aspects of technology which help to carve the frame of mind.Amenities, which once were rare and difficult to avail for everyone, is now available to common civilians.Recently, RCC structures has changed a lot,the symmetrical and identical storeys of premises is now considered as a conventional and to an extent inefficient design.The …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 1, 2021 · pp. 38–42 Read article
-
A Comprehensive Study of Radial Load Fluctuation on Alloy Wheels for Electric Vehicles
Abstract: Electric Vehicle’s alloy wheels are designed to allow for better heat dissipation. Manufacturers carry out many tests of a wheel to be sure, that the wheel will fit for safety reason as also their comfortability level is even bigger. Therefore, a specific design was selected for which the simulations of alloy wheel were performed under real loading conditions. The main objective of this research is to analyze the effects of …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 2, 2024 · pp. 47–56 Read article
-
Machine Learning-Assisted Design and Optimization of Lightweight Polymer Composites for IoT-Enabled Automotive Applications
Abstract: This study aims to develop an integrated machine learning and optimization framework for the intelligent design of lightweight polymer composites suited for IoT-enabled automotive applications. The goal is to enhance material performance while satisfying multiple design constraints such as mechanical strength, thermal stability, and process compatibility. A curated dataset of polymer composite formulations was used to train a Random Forest Regression (RFR) model capable of predicting tensile strength, thermal conductivity, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 12–27 Read article