Search
246 articles for “crack”
-
Self-Healing Structural Polymer Composites Incorporating Bio-Inspired Nanofillers
Abstract: Self-healing polymer composites become an attractive family of intelligent materials that are capable of autonomously repairing damage, which will enhance their durability, reliability and service life in extreme engineering applications. The materials are based on the principles of nature, using the nanofillers that are derived from biological systems to improve mechanical properties and self-healing capabilities by utilizing hierarchical structures and multifunctional interface interactions. The recent developments on the formulation of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Effect of Heat Treatment on Mechanical Properties of Silver Nanoparticles Embedded in Phosphate Glasses
Abstract: AbstractSilver nanoparticles have been embedded in CaO-P2O5 and CaO-CaF2-P2O5 glasses using melt quenching technique and heat treatment process. The growth of silver nanoparticles in the glass matrix appeared to be time dependent. Mechanical properties such as Vickers hardness, fracture toughness and brittleness for the glass samples were evaluated using a Vickers Indentation technique. Variation in Vickers hardness, Fracture toughness, and brittleness was observed with an increase in the size of …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 3, 2018 · pp. 11–17 Read article
-
Implications from Molybdenum: Emerging Trend
Abstract: Molybdenum (Mo) is refractory metal to subject high tensile and creep strength, high resistance to heat and corrosion, good thermal diffusivity and satisfactory welding properties. Addition of alloy ingredients lying as Ti, Zr, Si, B, C produce extra additive property evolution to adhere more in accord applicability at high temperature structural items. Fabrication of homogeneous alloy has prepared more adhering to and by powder processing. Extra-in-diffuse thermal involved shock and …
Published in Emerging Trends in Chemical Engineering · Vol. 7, Issue 3, 2020 · pp. 5–10 Read article
-
Fatigue Analysis of the FSAE Vehicle's Front Wheel Hub
Abstract: This study illustrates the design and analysis of the FSAE vehicle's front wheel hub. Because wheel hubs are subjected to cyclic loads on a continuous basis, there is a risk of fatigue, which leads to material failure. The start and spread of cracks in a material as a result of cyclic loading is known as fatigue. The brake discs could not be easily removed since the disc is positioned between …
Published in Journal of Automobile Engineering and Applications · Vol. 9, Issue 1, 2022 · pp. 18–26 Read article
-
Study the Effect of Cement Waste on Some Mechanical Properties of Acrylonitrile-Butadiene Rubber
Abstract: The basic idea of this paper is to prepare and study the composite rubber material for the manufacturing of an important part in the grain transportation systems in silos of general company for grain trade namely rablat, where it was the experience of this rablat manufactured in the new silo of Hilla/Babylon province for a period of eight months in winches and vector chain was fully proven. In this paper, …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 1, 2016 · pp. 11–14 Read article
-
Heterogeneous vs. Homogeneous Catalysis: Comparative Insights and Breakthroughs
Abstract: Catalysis, a pivotal process in chemical reactions, can be classified into two main types: heterogeneous and homogeneous catalysis. This comparative analysis delves into the distinctions, advantages, and breakthroughs in both domains. Heterogeneous catalysis, involving catalysts in a different phase than the reactants, is characterized by ease of separation and catalyst recovery, making it industrially favorable. Conversely, homogeneous catalysis, where catalysts and reactants share the same phase, offers superior selectivity and …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 3, 2023 · pp. 1–7 Read article
-
‘B’ash Concrete: Partial replacement of cement with Bagasse ash
Abstract: AbstractConcrete is an absolutely effective and essential construction material used all over the world because of it advantageous properties. But the increase in cost of cement and environmental pollution caused by cement manufacturing not only increase the cost of construction but also poses a serious threat to the environment. The utilization of industrial and agricultural waste produced by their processes has been used reduce waste for making economic, environmental, and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 7, Issue 3, 2017 · pp. 17–24 Read article
-
Experimental Study on Fibre Reinforced High Performance Concrete with Silica Fume
Abstract: This paper presents the effect of silica fume and glass fibre in High Performance Concrete (HPC). In this study, High Performance Concrete mixes with silica fume of 0, 10, and 20% with addition of glass fibre of diameter 14 μ and 12 mm length at various percentages as 0, 0.3, and 0.6% by the volume of cement on M75 grade of concrete. The mix proportions of concrete had a constant …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 1, 2013 · pp. 26–30 Read article
-
Fabrication and Optimization of Process Parameters for Friction Stir Welding AA7075+10%wt.SiC Composite by Taugchi Method
Abstract: Aluminium alloy 7075 as matrix and silicon carbide (SiC) as reinforcement has been widely used in aircrafts and space industries because of high strength to weight ratio. Fusion welding of this Aluminium Metal Matrix Composite (MMC) will lead to many problems such as porosity, micro-fissuring and hot cracking. However, friction stir welding (FSW) can be used to weld this MMC without above mentioned defects. Objective of this investigation are fabrication …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 102–112 Read article
-
Probability of Liquefaction induced Ground Failure under the Earthquake Scenario in Kathmandu Valley
Abstract: Kathmandu valley is highly susceptible to liquefaction hazard due to the presence of liquefiable soil up to considerable depth, the presence of shallow ground water table and occurrence of earthquakes at regular intervals. Past studies have also shown the occurrence of liquefaction with examples of observed ejection of sand boil and formation of cracks throughout the valley during 1934 Nepal-Bihar earthquake. Events similar to these were also observed during recent …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 2, 2019 · pp. 27–38 Read article
-
EFFECT OF ENGINE OIL CONTAMINATION ON THE GEOTECHNICAL PROPERTIES OF SOIL AND STABILIZATION TECHNIQUES: A REVIEW.
Abstract: Soil contamination by engine oil basically occurs due to spills and leaks. It is common near highways, petrol pumps, workshops, off shore petroleum productions etc. The change in geotechnical properties of soil due to engine oil contamination may cause serious problems like cracking and settlement of structures. The paper aims at reviewing the works of researchers on the effect of engine oil contamination on the various geotechnical properties of soil. …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 3, 2020 · pp. 9–12 Read article
-
ENHANCED TECHNIQUE FOR HYDRAULIC FRACTURING PROCEDURE IN FRACTURED ROCK MASS
Abstract: Notwithstanding the broad hypothetical work about hydraulic fracturing technique for estimation of stresses in rock mass, the experimental work has so far been restricted, particularly on account of its legitimacy in fractured rocks. Much work has been completed about the induced fractures created by hydraulic fracturing tests, however not on the impact of previously existing fractures and joints and their impact. When a fracture has been originated at the borehole …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 1, 2022 · pp. 39–44 Read article
-
Review of Synthesizing of Fuel from Plastic Waste
Abstract: Plastics are an important part of our daily life. It is cheap, easy to produce, and its faster rate of production are making it to be produced in larger quantities; on the other hand, plastics play important role in industrial applications also. In that situation, if plastic it is not disposed properly, lots of environmental challenges arise. In that condition, waste plastics need to be recycled; regeneration or its utilization …
Published in Journal of Industrial Safety Engineering · Vol. 9, Issue 1, 2022 · pp. 1–4 Read article
-
COMPARATIVE ASSESSMENT OF FIRE RESISTIVITY OF WALLING MATERIALS IN ONITSHA MARKETS IN NIGERIA
Abstract: Nigeria has been facing the problem of frequent fire outbreaks in markets and they are very regular in Onitsha markets in Anambra State. To minimise this problem, a research was conducted on the three major markets in Onitsha with the aim of comparatively assessing the fire resistivity of their walling materials, so as to generate guidelines for designing walls of market buildings in Nigeria. The research employed desktop study as …
Published in Journal of Industrial Safety Engineering · Vol. 9, Issue 3, 2022 · pp. 20–25 Read article
-
Smart Pothole Reporting Based on Deep-Learning
Abstract: In India, due to rage of rains and poor-quality construction the Indian state governments are facing the pothole and cracked road issues. The government is not able to assist faster to the people due to poor communication between people and govt. So, there exists a system which uses convolutional neural network (CNN) to detect the potholes. The peculiarity of this system is that it will process the pothole image reported …
Published in Journal of Mechatronics and Automation · Vol. 7, Issue 3, 2020 · pp. 21–27 Read article
-
Artificial Neural Network Based Defect Prediction in Casting
Abstract: The main problems which are facing by most of the casting industries is loss of productivity which is due to casting defects occurred during the production time. The main casting defects are cracks, misruns, blowholes scabs and airlocks. Most of the investigations made in this area is only discussing the defects occurred after a cast is made and no method has yet been developed to prevent the defects before casting. …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 2, 2015 · pp. 33–38 Read article
-
Weldability of Ferritic Stainless Steel
Abstract: The ferritic stainless steels are generally considered less weldable than austenitic stainless steels. In case of welding of first-generation ferritic stainless steels, rapid grain growth of ferrite takes place in both the fusion zone and heat-affected zone. These coarse grains have very low ductility and toughness. Excessive grain growth can be avoided by using lower welding heat input and or certain types of additives. They are lower in cost and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 185–194 Read article
-
Characteristics of PWC-11 in Atomic Reactors
Abstract: AbstractCarbon (0.1%) addition to basic Nb – 1 Zr alloy has introduced carbide precipitation to enhance desirable properties. Precipitation hardened PWC – 11 compared to solid solution hardened Nb – 1 Zr alloys show no appreciable changes by low cycle fatigue behavior, even failure modes are also similar i.e. intergranular cracking. Selections of suitable alloys are considered for resistance to high temperature in extraterrestrial environments and resistant to radioactive neutron …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 37–46 Read article
-
Poly Vinyl Alcohol/Kaolinite Clay/Grafted Cellulosic Fibre Based Hybrid Composite Films: Physical, Mechanical, Optical and Biodegdrability Studies
Abstract: In this study, physical, mechanical, optical, morphological and biodegdrability properties of poly vinyl alcohol (PVA)/kaolinite clay (KC)/grafted barley husk (GBH) based hybrid composite films were prepared by solution casting method. Barley husk was grafted with oleic acid using graft copolymerization method. The hybrid composite films were characterized by FTIR and SEM. Based on the findings from this work, water uptake of the composite films increased with increase in the amount …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 41–52 Read article
-
Investigation of Inter Delamination Properties and Morphological Analysis of Natural Fiber-Reinforced Polymer Matrix Composites
Abstract: AbstractNatural fibers are strong, light weight, renewable, cheap, completely or partially recyclable, and biodegradable. The various types of natural fibers are flax, cotton, jute, sisal, kenaf pineapple, bamboo, banana, wood, etc. In this work, sisal fibers and banana fibers have been employed as the main reinforcing materials with epoxy resin as the matrix in order to increase the effectiveness of natural fiber-reinforced polymer matrix composites. In this study, it is …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 1–7 Read article