Search
300 articles for “Microscopy”
-
Investigating the Influence of Process Parameters on Photochemical Machining of Phosphor Bronze Alloy Microchannels
Abstract: Microchannels are widely employed in microfluidic devices, biomedical systems, and compact heat exchangers, where their functional efficiency depends strongly on surface finish, dimensional control, and edge quality. Traditional machining techniques often face limitations in producing such features with the required precision, prompting the use of advanced micromachining methods. In the present work, photochemical machining (PCM) has been applied to fabricate serpentine-shaped microchannels in phosphor bronze. The study systematically investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 837–846 Read article
-
Enhancement of Mechanical Properties in Eutectic Al-Si Alloy Matrix Composites Reinforced with Kyanite and Graphite via Stir Casting
Abstract: The purpose of this work is to enhance the mechanical performance of a eutectic Al–Si alloy by incorporating hard ceramic (kyanite) and soft solid lubricant (graphite) reinforcements using a liquid-state stir casting route. Metal matrix composites were fabricated with kyanite contents of 2, 4, and 6 wt.% and a constant 2.5 wt.% graphite. Their microstructures and mechanical properties were systematically evaluated. The microstructure was examined using optical microscopy and energy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 90–100 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Bioscouring And Anionization of Waste Cotton Fabric for Efficient Removal of Malachite Green Dye
Abstract: Adsorption is an efficient method for dye removal but the high cost of adsorbents limits its use, emphasizing the need for sustainable, low-cost alternatives. This study explores the usage of modified cotton fabric for the treatment of malachite green (cationic dye) from wastewater. Cellulase extracted from Raphanus sativus and Daucus carota were evaluated for bioscouring potential which was confirmed by scanning electron microscopy. Further, cotton fabric was chemically modified using …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 53–68 Read article
-
Catalyst-Driven Degradation and Failure Analysis of Intergranular Cracking in 316H Studded Pipes under Refinery Heat Recovery Conditions
Abstract: A failure analysis investigation was carried out on a high-temperature studded pipe used in a convection module for heat recovery in an oil and gas refinery application after leakage was detected during pre-commissioning hydrotesting. The investigated pipe was manufactured from AISI 316H austenitic stainless steel, and carbon steel studs had been joined to its outer surface by high-frequency resistance welding. Two leaks were reported in the pipe under investigation, and …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
Determination of Compatibility of Polymer Systems and Study of Chemical Properties of their Mixtures
Abstract: We have obtained mechanical strength of materials as a result not by synthesizing new polymers, but by using industrial polymers. We have developed a technology for obtaining new composite materials based on industrial multi-tonnage polymers of high-strength polyethylene (HSPE), polyvinyl chloride (PVC), polyurethane thermoplastic elastomer (DUTEP), butyl rubber (BR), chlorocarboxylate polyethylene (CCPE), ethylene propylene rubber (EPR). To obtain a composition from these polymers, their mixture compatibility was first determined using …
Published in International Journal of Cheminformatics · Vol. 4, Issue 1, 2026 · pp. 17–29 Read article
-
Molecular Dynamics and Therapeutic Architectures of Cannabinoid Receptors: A Comprehensive Review
Abstract: Expanding on these foundations, recent structural biology studies using cryo-electron microscopy have provided high-resolution insights into the conformational dynamics of CB₁ and CB₂ receptors. These findings have enabled a more precise understanding of ligand–receptor interactions, particularly how agonists, antagonists, and reverse agonists stabilize distinct receptor states. Such knowledge is critical for rational drug design, allowing researchers to selectively modulate downstream signaling pathways. For instance, CB₁ receptors primarily couple to Gi/o …
Published in International Journal of Cheminformatics · Vol. 4, Issue 1, 2026 · pp. 36–40 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Development and Comparative Study of Aluminium- Copper Metal Based Composite Through Different Routes
Abstract: The aim of this study is to develop aluminium-copper composite through powder metallurgy technique. Powder metallurgy is an art or technology which can produce exact dimension of final roducts utilizing less energy. Copper oxide (CuO) was used as the source of copper, which was extracted through a reduction process using dextrose. The reaction was thoroughly examined and reported. Commercially available aluminium powder served as source of the aluminium. Aluminium- copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 19–32 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Assessing Taila Bindu Pariksha as a Diagnostic and Prognostic test for Diabetes Mellitus
Abstract: Ayurveda has consistently emphasised on not just treatment of a disease but also how to diagnose it and further assess the prognosis. Ayurveda is blessed with different diagnostic tests which is broadly classified into Roga and Rogi Pariksha such as Ashtavidha Pariksha, Dashavidha Pariksha and Dwadashavidha Pariksha. These tests are used very rarely by just few Ayurvedic practioners as an important diagnostic and prognostic methods in different diseases. Taila Bindu …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 15, Issue 2, 2026 · pp. 1–5 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Synthesis of Zinc Oxide Nanoparticles Through Polymeric Precursor Route and their Integration into Functional Nanocomposites
Abstract: A polymer precursor approach for creating zinc oxide (ZnO) nanoparticles with regulated size and shape is described in this work. By stabilising and capping particles, the polymer-assisted pathway efficiently reduces particle agglomeration while facilitating controlled nucleation and growth. The surface shape and dispersion of the produced ZnO nanoparticles were assessed using the scanning electron microscopy (SEM). When compared to traditional synthesis techniques, the addition of polymer greatly enhanced surface homogeneity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 883–890 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Comprehensive Review of the Fundamental and Functional Properties of Crystalline Materials
Abstract: Crystalline materials, characterized by their highly ordered atomic arrangements, serve as the backbone of modern engineering and technology. This review provides a detailed examination of their diverse properties, categorized into mechanical, thermal, electrical, and optical domains. We analyze fundamental mechanical parameters such as the elastic modulus, yield strength, and fracture toughness, alongside functional behaviors like fatigue and creep. The discussion extends to thermal transport and expansion, electrical conductivity and resistivity, …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 · pp. 20–24 Read article
-
Smart Biopolymer–PCM Composite Modules with Embedded Wireless Thermal Sensing for Autonomous Energy Storage Applications
Abstract: The development of multifunctional polymer composite systems for intelligent thermal energy storage has gained significant attention due to the increasing demand for sustainable and autonomous thermal management technologies. In the present study, a wireless-integrated biopolymer–phase change material (PCM) composite module embedded with thermal feedback sensors was successfully fabricated and experimentally investigated for advanced thermal energy storage applications. Polylactic acid (PLA) was employed as the biodegradable polymer matrix, while paraffin wax …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 193–205 Read article