Search
1365 articles for “Gelucire® 50/02”
Nothing matched all of your words, so these match any of them.
-
Water Permeability of Hybrid Steel Fiber Reinforced Concrete
Abstract: Results of an investigation conducted to study the water permeability of (HySFRC) are presented. Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations corresponding to 0.5, 1.0 and 1.5% fiber volume fractions. A reference concrete mix containing no fibers was also cast for comparison purpose. A total number …
Published in Journal of Construction Engineering, Technology & Management · Vol. 4, Issue 2, 2014 · pp. 30–37 Read article
-
Experimental Investigation of Mechanical Properties of Hybrid Fiber (Basalt and Steel) Reinforced Concrete
Abstract: The paper reports experimental investigations on hybrid-reinforced concrete. The proportion of basalt fiber and steel fiber was 50% respectively of the total fiber taken as sample. Effect of fiber on various strengths of concrete is studied. Fiber content varied from 0 to 4% at an interval of 1% by weight of cement. Various considerations for investigation are compressive strength, flexural strength, split tensile and bond strength. Cube of size 150 …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 2, 2013 · pp. 5–10 Read article
-
Mitigation of Expansive Soil Problems by Using Helical Piles with Additives
Abstract: In this study, nine essential additives in addition to three mixed additives with different ratios have been chosen and implemented during the installation of helical pile. The choice took into consideration that some of the additives were cheap and available in the local market; others were waste materials such as ceramic, brick fragments and coal fly ash. Some relatively expensive additives such as silica fumes were also added because it …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 3, 2015 · pp. 30–40 Read article
-
Investigation of Rock Dust Suitability as Improvement Material of Subgrade and Sub-base Laterite Material of Elerinjare, Kwara State, Nigeria, in Pavement Construction
Abstract: The current study involves the improvement of laterite soil by addition of granite dust. The laterite and dust used for the study were collected at Elerinjare town, Ilorin. The analyses were done in a laboratory. The tests are compaction test, specific gravity, California bearing ratio (CBR) (soaked and unsoaked), Atterberg's limit, Sieve analysis, and bulk density. In this investigation, an attempt was made to stabilize lateritic soil using quarry dust …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 2, 2023 · pp. 41–57 Read article
-
Assessment of Fire Safety Measures in Multi-functional High-rise Structures for Enhanced Fire Protection
Abstract: The complex nature of multiple-use high-rise buildings poses significant challenges for ensuring fire protection, given their functional diversity, intricate design, and substantial economic value. This study aims to assess the effectiveness of the physical fire protection systems installed in fourteen randomly chosen commercial high-rise buildings located in Indore. The primary focus is on optimizing these systems within the framework of industrial safety engineering principles. Various methods were employed, including physical …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 3, 2023 · pp. 25–34 Read article
-
A Quad-Element UWB-MIMO Triangular Monopole Antenna with Triple Band -Notch and High Isolation
Abstract: A quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation is proposed in this paper. The presented antenna consists of four triangular -shaped antenna elements, which are arranged in orthogonal orientation. This antenna is printed on low-cost FR-4 substrate with dielectric constant of 4.4 and its overall size is 50 × 50 × 1.6 mm3. Its operating frequency band is 2.97~11GHz. High isolation of 22dB between four …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 2, 2023 · pp. 30–37 Read article
-
Design and Implementation of UWB-MIMO Triangular Antenna with Notch Technology
Abstract: The paper proposes a quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation. The antenna comprises four triangular-shaped elements arranged orthogonally, printed on a low-cost FR-4 substrate with a dielectric constant of 4.4. Its dimensions are 50 × 50 × 1.6 mm³, and it operates within the frequency band of 2.97 to 11 GHz. To achieve high isolation of 22 dB between the four radiatingelements, a square …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 3, 2023 · pp. 8–15 Read article
-
Hazards of Power Production-A comparative study
Abstract: Nuclear energy has played a major role in reducing the world's use of oil for electricity generation over the past decades. Current estimates are that uranium resources will last some 400 to 500 years at the present rate of use. This resource base could, furthermore, last some 50 times longer if breeder reactors are introduced. Of the main energy sources, namely coal, hydro and nuclear, nuclear can be even considered …
Published in Journal of Nuclear Engineering & Technology · Vol. 11, Issue 1-2, 2021 · pp. 1–20 Read article
-
BisGMA/Thermoplastic Polymer Blends: A Study of Mechanical and Corrosive Properties
Abstract: AbstractThe objective of this work is to synthesize various blends of Bisphenol-A-glycidyldimethacrylate (BisGMA) resin with different proportions of thermoplastic polymers like poly-N-vinylpyrrolidone (PVP) and poly-ethyleneoxazoline (PEOZ) and to study their mechanical and corrosive properties. The experimental results showed that BisGMA/PVP and BisGMA/PEOZ blends displayed an improvement in the mechanical properties over unmodified BisGMA resin and the 50:50 blend system is the optimum blend composition in both BisGMA/PVP and BisGMA/PEOZ blends. …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 1–14 Read article
-
Structural and Electrical Properties of Low-Energy Ion Beam Kr-Irradiated In/Se Bilayer
Abstract: In the present work, In (~50 nm) over Se (~50 nm) thin films were deposited successively on an Si substrate by e-beam evaporation method under 2×10–5 mbar pressure. The In/Se bilayers were irradiated with low-energy ion beams of 350 keV Kr+1 with fluence of 3 × 1016 ions/cm2. The sample was subsequently characterized for phase formation using X-ray diffraction and thickness profile using Rutherford backscattering spectrometry analysis. In the pristine …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 91–96 Read article
-
Investigation on Mechanical Properties of Bamboo-Plastic Composites by Alkali Treatment and Illustration via Scanning Electron Microscopy
Abstract: The morphological properties, tensile and flexural strength of composite materials made of bamboo fibres and plastic were investigated. Bamboo-plastic composites (BPCs) were made from bamboo fibres, plastic, and urea formaldehyde (UF) resin to evaluate the effects on mechanical properties. Two different types of plastics, namely polypropylene (PP) and low-density polyethylene (LDPE) were used to make the composite fabrication. The bamboo fibres were extracted after soaking them in a sodium hydroxide …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 86–95 Read article
-
Comparison of Physicochemical Concentration on Temperature Effect of Crude Oil Contaminated Water Environment
Abstract: The bio-adsorbents used are plantain stem fiber, banana stem fiber and palm fruit fiber and the investigation was aimed to examiner the effect of temperature on the performance of the bio-adsorbents in a packed bed unit for the mitigation (reduction or removal) of total petroleum hydrocarbon (TPH) from the fresh water medium using agro based fibre, which was prepared by subjecting the agro materials into sun and room dried before …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 1–17 Read article
-
Report on Microfluidic Flow of Dyed Working Liquids inside the Polymeric Devices
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is engineered by the maskless lithography and indirect bonding technique. Also, total nine individual polymethylmethacrylate (PMMA) based microfluidic devices are fabricated by maskless lithography, hot embossing lithography, and direct bonding technique. Dyed ethylene glycol, dyed ethanol, and dyed aqueous isopropyl alcohol (50% water, 50% IPA) are prepared and used as working liquids to record each surface-driven microfluidic flow. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 22–29 Read article
-
Development of Mathematical Model to Predict Annual Runoff in Port Harcourt City, Rivers State, Nigeria
Abstract: This paper is aimed at monitoring and predicting annual runoff of Port Harcourt city for a classified area type and flat land of 0–5% slope. Mathematical models were developed to monitor and simulate annual runoff of an area type of 30% impervious (paved), 50% impervious (paved) and 70% impervious (paved) within the Port Harcourt city. The analysis of annual rainfall and annual runoff data gives a coefficient of determination of …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 29–36 Read article
-
Floodplain Inundation Modeling and Mapping for Geray River: Nile Basin, Ethiopia
Abstract: Flood is among the most devastating natural hazards in the world claiming lives and properties more than any other natural phenomena. During high flow, the Geray River flooded the vicinity of the area and causes loss of cultivated land and life. The objective of this study describes the flood extent and depth in the Geray River for different flow conditions. This research involves the integration of HEC-HMS, HEC-RAS, and GIS …
Published in Journal of Water Resource Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 25–45 Read article
-
Appraisal of Household Potable Water Accessibility in Sub–Urban Areas of Oyo State: Geographic Information System and Remote Sensing Approach
Abstract: This study centred on assessing potable water accessibility in sub-urban areas using Fiditi as a case study. This study adopted a service area network and overlay operation in ArcGIS to achieve the aim of this study. Locational coordinates of all the facilities were obtained through Garmin 76 handheld GPS. Also, ground truthing was adopted to distinguish residential buildings from non - residential buildings. Coordinates (X.Y, Z) of the study were …
Published in Journal of Water Resource Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 1–14 Read article
-
Nano-additives in Concrete: Present Scenario and Challenges
Abstract: This research work reviews on nanomaterials in concrete. Now, the conventional concrete properties of nanomaterial utilization have been introduced various attentions to increase. Ultimately, as an introduction, nanomaterial is increasing the strength and durability of the concrete. The nanomaterial is defined as the material that includes the particle size which smaller than 200 nm. Nanomaterials must be at least 500 nm in size. During the research of concrete in the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 11–20 Read article
-
Experimental analysis of quaternary cement binder
Abstract: As concrete structure emitted large amount of carbon dioxide in the environment, to reduce these emition, need to minimize use of cement by using supplementary cementious material such as fly ash, silica fume, rice husk, ground granulated blast furnace slag etc. As quaternary blended cement concrete is prepared by replacing of cement with cementious material is good option for this. In this research quaternary blended cement concrete prepared by using …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 12–17 Read article
-
Effect of Fiber Hybridization on Compressive Strength and Water Permeability of Steel Fiber Reinforced Concrete
Abstract: The paper presents results of an investigation conducted to study the compressive strength and water permeability of hybrid steel fiber reinforced concrete (HySFRC). Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations. Mixes with no fibers were also cast for comparison purpose. Three fiber volume fractions, i.e., 0.5, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 11–16 Read article
-
Analytical Determination of Strength of Demolished Recycled Coarse Aggregate
Abstract: Construction work has increased rapidly from the past two decades. With these construction activities going up, we find lacking of the construction materials, particularly aggregates. So, finding an alternate resource and their feasibility; study is the need of our project. Recycled or used aggregate proves to be a good alternative here. Therefore, the investigation was carried out using compressive strength test, confined to the objective we have tested and empirically …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 1–7 Read article