Search
1958 articles for “Desi” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
An Experimental Investigation on the Characterization of Al6061-Polymer Adhesive Joint by Design of Experiment
Abstract: Aluminium alloys and polymers are the light-weight materials extensively used in structural, aero-space, automobile and marine applications. Al6061 alloy and nylon 6 were joined through the adhesive bond and their characteristics were analyzed. However, joining of these dissimilar materials for the evolution of hybrid engineering structures were complex because of their difference in physical, chemical and mechanical behaviours. The Taguchi’s, Design of Experiment were conducted on the various mixture of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 206–219 Read article
-
AI-Assisted Design and Theoretical Aerodynamic Evaluation of a Multistage Conical Diffuser Micro Wind Turbine Fabricated from Polymeric Composites
Abstract: The rising demand for compact, lightweight, and high-efficiency renewable energy systems has accelerated the development of micro wind turbines capable of delivering stable performance under low wind conditions. Traditional bare-rotor micro turbines suffer from limited aerodynamic efficiency, motivating the adoption of diffuser-augmented architectures and advanced polymer-based composite materials. This study presents the AI-assisted conceptual design and theoretical aerodynamic evaluation of a multistage conical diffuser micro wind turbine fabricated using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1111–1118 Read article
-
AI-Driven Inverse Design of Functionally Graded Bio-Nanocomposites for Sustainable High-Barrier Packaging
Abstract: Multilayer plastic packaging realizes high barrier performance through laminated heterogeneous structures, but the heterogeneous structure has severe end-of-life challenges caused by the interfacial incompatibility of materials and the poor recyclability. This study proposes the inverse design of functionally graded PLA-nanoclay composite films by reinforcement learning as a monolithic alternative to traditional multilayer systems. Twin-screw extrusion is designed as a continuous control Markov decision process, and proximal policy optimization (PPO) is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1547–1564 Read article
-
Intelligent Electromagnetic Synthesis: An AI-Driven IoT Framework for Adaptive Antenna Design in Missile Navigation
Abstract: The rapid evolution of hypersonic and long-range tactical missile systems necessitates antenna architecture capable of maintaining robust communication links under extreme thermal, mechanical, and signal-jamming environments. Traditional antenna design methodologies often relying on iterative simulation cycles and static optimization are increasingly insufficient for the real-time requirements of modern aerospace navigation. This paper proposes an AI-driven, IoT- integrated framework that facilitates autonomous antenna design and performance optimization. By deploying a distributed …
Published in International Journal of Radio Frequency Innovations · Vol. 4, Issue 1, 2026 Read article
-
Reactive Distillation Design and Control
Abstract: This study deals with the design and control strategies of reactive distillation process. Steady state design including phase equilibrium and chemical equilibrium were studied. Dynamic simulations were conducted by designing control structure. The developed control structure contains level controller, pressure controller, temperature controller. The developed control structure has shown good performance in withstanding the various process disturbances
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 3, 2016 · pp. 31–39 Read article
-
Design and Estimation of Concrete Gravity Dam using STAAD.Pro and MS Excel
Abstract: Aim of current project is to propose a gravity dam across river Tapi, Amravati district in Maharashtra. Many Talukas in nearby areas are facing severe water shortage for major part of a year as there are no other perennial water resource. Agriculture is solely dependent on monsoon. Ground water table is very low. Scope of project includes site selection, collection of rainfall data, planning, design and estimation analysis of the …
Published in Journal of Construction Engineering, Technology & Management · Vol. 12, Issue 2, 2022 · pp. 20–29 Read article
-
Optimal Design of Gusset plate and Analysis of Bailey Steel Truss Joint
Abstract: In order to achieve safe and economic steel structure joint, we are going to design a gusset plate such that its shape is optimized by achieving the same amount of strength. In conventional method of designing a joint we make sure that gusset plate is able to bear the load and joint is safe, but lot of material is wasted where there is no stress induced. So, to avoid this …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 74–83 Read article
-
Model Based Controller Design for Position Control of Servo Controlled Hydraulic Actuator against Air Entrainment
Abstract: Position control is important for numerous industrial and aircraft applications. Electro-hydraulic actuators are used for position control for advantages they provide over other actuation systems. The hydraulic fluid used for actuation, though desired to be incompressible, has some compressibility in practice. Entrainment of air in the fluid increases compressibility effect by reducing the effective bulk modulus. Reduced bulk modulus makes position control difficult. The paper studies the effect of effective …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 2, 2016 · pp. 25–35 Read article
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box-Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 32–54 Read article
-
Seismic Evaluation of RC Framed Buildings using Performance Based Design
Abstract: Seismic resiliency of new buildings has developed over the years due to enhancements in seismic codes and design practices. Though, existing buildings designed and built under past codes are vulnerable and require a performance-based screening and retrofit prioritizing. Performance based seismic design provides a framework for determining the level of safety and level of property protection in earthquake events with the consideration of uncertainties in the quantification of possible hazard …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 1, 2020 · pp. 33–41 Read article
-
Design of Modified North Light Roof Trusses: Comparative Study
Abstract: The study of north light truss and modified trusses by analyzing and designing has been carried out and submitted the comparative study of the same in the form of tables, graphs and charts, which highlights the forces, deflections, optimum steel requires, actual steel requires as per grouping. STAAD.Pro V8i software also used to analysis and design of such models. Solar panel loads also considered on the truss. Limit State Method …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 27–35 Read article
-
4-Bit Magnitude Comparator Design using Different Logic Styles
Abstract: 4-Bit Magnitude Comparator using various logic styles is explained here. Comparison is one of the common arithmetic operations that is used to determine which number is greater, equal to, or less. Every device from OP-AMP to ALU needs to perform comparison operations. At designing level, comparator can be designed by using different logic styles. Here, comparison is done for simple 4-Bit combinational comparator and cascaded comparator which we have designed …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 2, 2015 · pp. 16–22 Read article
-
Design and Implementation of an Efficient Ternary Control Unit
Abstract: Multi-valued logic (MVL) is emerging as a thrust area of research due to several advantages offered by them over the conventional binary logic. Ternary logic is a promising alternative to the binary logic design technique thereby attracting a wide community of researchers to contribute in the design of ternary processor. The control unit is effectively the nerve center of a processor that plays a vital role in generating the appropriate …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 3, 2015 · pp. 55–70 Read article
-
Methodology of Standard Cell Library Design in .LIB Format
Abstract: The importance of standard cell library design methodology is growing with very-large-scale integration (VLSI) technology advancement due to its usage in VLSI EDA synthesis flows. In this paper, to best of our knowledge and information in any published literature no systematic method of standard cell and creating appropriate co-laterals. In this paper the standard cell design methodology, layout topology, methodology for creating characterized timing table has been developed using 250 …
Published in Journal of VLSI Design Tools and Technology · Vol. 4, Issue 1, 2014 · pp. 30–38 Read article
-
Analysis of VLSI Circuits Designed with Single and Dual Channel Strained Silicon MOSFETs in Nanoregime
Abstract: In this paper, performance of the VLSI circuits designed with strained silicon MOSFETs is analysed andcompared with bulk MOSFET. Emphasis is being given on the evaluation of speed, power and noisecharacteristics. An inverter circuit designed with single channel and dual channel biaxial strained MOSFETsof 40 nm channel length and 0.3 germanium mole-fraction is being taken to evaluate the performance throughsimulation. The device design and circuit simulation is done in Sentaurus …
Published in Journal of VLSI Design Tools and Technology · Vol. 1, Issue 1-2-3, 2011 · pp. 15–20 Read article
-
Optimal Green Design of a Reinforced Cement Concrete Footing
Abstract: The goal of a civil engineer is not only to design, analyse, construct and maintain a safe green environment for the living but also to provide an efficient design which optimizes the use of concrete. The design of footing plays an important role in the design of structures carrying heavy loading. The footing is the vital element of the structure which carries the entire load of the structure and transfer …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 23–38 Read article
-
Comparison of IS 456 and its Amendments to Analyses and Design a Multistoried Building (G+7) by using STAAD Pro.
Abstract: In this paper, a study has been made for the economic structure which is analyzed and designed according to the Indian standards. The comparison of IS456:2000, IS1893:2002 and its amendments to analyses and designs a multistoried building [G+7] using STAAD Pro.The planning is completed by taking in to account the necessities and standards recommended by IS code, the design is completed using the assistance of Auto CAD and also the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 6–13 Read article
-
Design and Analysis of Common Injection Mould for Variable Length of Extended Prob Housing Component
Abstract: The present study focused on designing a common injection mould for variable length of component of nylon material for prob housing plastic part and die material as H13. It was operated on 210 t vertical injection moulding machine. The type of cooling system employed wasline cooling. The effect of cooling system location on the stresses produced in the mould was analyzed and component defects determined by mould flow simulation. Injection …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 1–9 Read article
-
Empirical Method of Designing a Coaxial Line
Abstract: AbstractThis paper is meant to give a concise and correct method to design a coaxial cable using standard design formula. Simulation is done using empirical methods designing of coaxial transmission line. The coax is designed with a cut-off frequency of 1 GHz in TEM mode. The characteristic impedance of the coax is 50Ω. The aim here is to help the reader design a correct coaxial cable at the port of …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 8, Issue 3, 2020 · pp. 33–36 Read article
-
Design and Performance Analysis of a Log Periodic Dipole Antenna with a Frequency Range of 1350 to 2690 MHz
Abstract: The introduction of broadband systems to communication and non-communication technologies has demanded the design of broadband antennas. RF antennas have relatively small bandwidth and poor directivity while the log periodic dipole antenna (LPDA) provides better directivity and gain with wide bandwidth. For a communication link and data transmission at higher rates, wider bandwidth is required with high gain and directivity. This necessitates designing a wideband antenna. In this paper, a …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 6–12 Read article