Search
403 articles for “tensile strength”
-
Experimental Investigation of Tensile Strength of Bamboo Fiber/Synthetic Glass Fiber
Abstract: In this work, hybrid fiber reinforced composites (HFRCs) with enhanced mechanical and physical characteristics are created by reinforcing composite laminates using a blend of natural bamboo fiber and synthetic glass fiber. The primary goal of the inquiry is to assess these composites' tensile and impact properties. In comparison to non-hybrid composites, the hybrid composite, which consists of two layers of bamboo fiber and one layer of bidirectional glass fiber, had …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1700–1710 Read article
-
Experimental and Numerical Studies on Radial Tensile Strength of Composite Rotor
Abstract: This paper describes the experimental and numerical studies on the radial tensile strength (RTS) of composite rotor. Carbon/epoxy composite rotors were fabricated using a filament winding process and their radial tensile strength was determined by diametric tensile testing of composite C-rings. The radial tensile strength of the composite rotor was measured as ~ 22 MPa and the failure was found to occur circumferentially symmetric about the horizontal plane of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 985–996 Read article
-
Effect of 3D Printing Process Parameters on the Tensile Strength of Polylactic Acid (PLA)
Abstract: This study employs the Taguchi approach to systematically analyze and optimize critical Fused Deposition Modeling (FDM) parameters, focusing on their effect on the tensile strength of 3D-printed Polylactic Acid (PLA) components. The study explores three levels of layer thickness (0.15 mm, 0.25 mm, and 0.3 mm), infill densities (25%, 50%, and 75%), and nozzle temperatures (200°C, 205°C, and 210°C) across three infill patterns: Triangular, Gyroid, and Zig-zag. A total of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 128–140 Read article
-
Evaluation of Indirect Tensile Strength and Unconfined Compressive Strength of Cement Treated Granular Subbase with Copper Slag
Abstract: This study investigates the mechanical properties of Cement Treated Granular Subbase (CTGSB) with the inclusion of copper slag as a partial replacement material. The research focuses on evaluating the Indirect Tensile Strength (ITS) and Unconfined Compressive Strength (UCS) to assess the material's suitability for road construction. Various mix proportions of copper slag were analyzed to determine their effect on strength development. The results revealed that the ITS increased from 0.79 …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 22–26 Read article
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article
-
Mechanical Property Assessment of Hybrid Fiber Reinforced Composites Through Experimental Research
Abstract: Natural fibre reinforced composites are gradually taking the place of synthetic fibre composites due to its inexpensive cost, low density, and ease of supply. Furthermore, the addition of some waste materials to composites has remarkable properties that are attracting interest from a wide range of technical domains. Fibre reinforced with glass, carbon, and jute were used to generate hybrid composites. As a filler, different amounts of eggshell powder were mixed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 244–251 Read article
-
Enhancing Concrete Durability and Mechanical Properties for Pavement Quality Concrete (PQC) Roads Using Basalt Fiber Reinforcement
Abstract: Concrete, by nature, is brittle and has a very low tensile capacity, which is a double whammy in transportation infrastructure, such as pavement quality concrete (PQC), for roadways, where we need durability and strength. One such method is the use of basalt fibre, as it is a much better way of enhancing the road runway way performance of concrete. This research studies the impact of the addition of basalt fibres …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 266–280 Read article
-
Mechanical behaviour of Glass and Carbon fiber reinforced composites
Abstract: Components made with fiber reinforced composites are replacing components made with the conventional materials is due to holding superior mechanical properties and high specific strength with good corrosion resistance. These favourable attributes are not possible with a conventional monolithic material. Composites are developed with matrix and fibers as reinforcement material, the reinforcement fibers are playing a crucial role to attain a high strength property. Glass and carbon fibers are using …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 253–257 Read article
-
Strategic Enhancement of Composite Strength Explored Through Comprehensive Integration of Flax Fiber and Cenosphere in Epoxy Resin Matrices
Abstract: The Current research delves into the mechanical attributes of composite specimens, integrating flax fiber and cenosphere fillers within an epoxy resin matrix catalyzed by K-6 hardener. Executing a meticulous approach involving a vacuum bagging method and a specific formulation of 10 wt.% cenosphere, 50% epoxy resin, and 40% flax fibers, the study rigorously scrutinized tensile and flexural strengths. Notably, the first specimen exhibited a peak tensile strength of 94.329 MPa, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 199–217 Read article
-
New Generation Waste Material as Sustainable Ingredient in Concrete: An Experimental Approach
Abstract: E-waste, including devices like phones and computers, poses serious environmental risks. To mitigate these, the construction industry is exploring e-waste as a material to enhance concrete strength and durability. Hence, the present study assesses the performance of M40-grade high-strength concrete by replacing coarse aggregates with 0% to 30% e-waste plastics at various intervals. As the e-waste replacement increased, fresh concrete's workability decreased gradually. The mix containing 30% e-waste experienced the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 141–156 Read article
-
Experimental Analysis of Glass Fiber Composite on Low Velocity Impacts
Abstract: This research specifically deals with determining the retained tensile strength after loading Glass Fiber Reinforced Polymer (GFRP) composites following low-velocity impact. The purpose is to determine the degree to which these impacts affect the structural performance and mechanical integrity of GFRP materials. Experimental tests were conducted on glass fiber composite specimens in order to observe variation in tensile strength upon impact. The results indicated significant tensile strength reduction in impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 789–796 Read article
-
Experimental Study on Waste Fibers in Concrete
Abstract: The rising expense of building, along with the progressive impact on the environment, has driven experts to adopt natural fibers such as coir and bamboo fibers and synthetic fibers such as plastic fibers for boosting concrete strength. Fibers are readily available at the test location, making them comparatively suitable as a reinforcing material in concrete. Concrete with fibers was compared to conventional concrete, and different strength parameters such as bending, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 190–201 Read article
-
An Experimental Investigation of Impact of Polyproplene as a Partial Replacement in Concrete
Abstract: India, as a developing nation, will require high-strength and high-performance concrete for future infrastructure projects. Fibrous concrete, which incorporates fibers to enhance structural integrity, is one such material that could meet these demands. With different concrete fibrous materials, shapes, distributions, orientations, and densities, fibrous concrete takes on different characteristics. Polypropylene is a lightweight synthetic fiber that enhances the structural strength of concrete and helps prevent the formation of cracks. In …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 1–6 Read article
-
Characterization of Strength of Aluminum (Al 6063-T6) After Corrosion
Abstract: Aluminum are frequently used as light weight structure in various nautical design. One of them is the ship structure design where sever environment of saline water influences the damage of the structure and one among them is pitting. In this paper, an experimental verification of strength and impact of corrosion effect on Al-6063–T6 aluminum was presented. The specimens were exposed to saline water for various duration like 500 hrs, 750 …
Published in Journal of Experimental & Applied Mechanics Read article
-
An Experimental Investigation of Polyethylene Terephthalate Fibers in the Properties of Concrete
Abstract: In India near about every year 45 million tons of solid waste is generated. The solid waste rate is increasing of 1.5 to 2% every year. In that total solid waste, Plastics contains 12.3% waste generated in which most common are the water bottles. Now the present worldwide situation, the production of PET (Polyethylene Terephthalate) exceeds 6.9 million tons per year. So that it is necessary to reusing of PET …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1063–1072 Read article
-
Experimental Investigation of Mechanical Properties of the Composite Materials Reinforced by Agro-based Waste Materials
Abstract: In this work, experiments were carried out to develop the glass fiber reinforced composites using the hand layup method and analyze the mechanical properties of the GFRP hybrid composites. The ultimate Tensile strength (UTS) using rice as a filler (GFRPC/R) was 3.04% and 12.89% higher than coir and wheat as filler, respectively. The hybrid composite using coir as a filler (GFRPC/C) revealed 12.54% greater flexural strength, and the hybrid composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 186–196 Read article
-
Impact of Polypropylene Fibres on the Properties of Concrete
Abstract: This review paper explores the effects of polypropylene fibres on the mechanical and structural properties of concrete. The integration of short, discontinuous fibres into plain concrete enhances its post-cracking behavior and overall performance, with notable improvements in tensile strength, fracture strength, toughness, impact resistance, and flexural strength. These fibres effectively control crack propagation, increase energy absorption, and improve durability under varying loading conditions. A comprehensive analysis of prior research highlights …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 55–60 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Enhancing Concrete Performance Through Ternary Mixtures: Utilizing SCBA and Silica Fume for Sustainable Construction
Abstract: This study investigates the effects of incorporating Sugarcane Bagasse Ash (SCBA) and Silica Fume (SF) as supplementary cementitious materials on the properties of concrete. Compressive strength, split tensile strength, and water absorption characteristics of ternary blended concrete mixes containing varying proportions of SCBA and SF were examined at curing periods of 7, 28, and 56 days. The results reveal that up to 15% SCBA replacement and 10% SF addition led …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 1, 2024 · pp. 6–12 Read article
-
Influence of Alkali Treatment on the Tensile Properties of The Hybrid Fiber Reinforced Polymer Matrix Composite
Abstract: In this study, the effect of alkali treatment on the tensile strength of the hibiscus fiber, gongura fiber, and treated madar fiber-reinforced Polymer Matrix Composite (PMC) is studied. The Sodium Hydroxide (NaOH) solution is utilized for madar fiber treatment. The traditional hand layup methodology was used for fabrication. The influence of tensile property control variables such as duration of fiber treatment, concentration of NaOH for treatment, and proportion of fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 28–34 Read article