Search
64 articles for “calorimeter”
-
Enhancing Engine Efficiency and Reducing Emissions: A Comprehensive Review of Air Calorimeter Technology
Abstract: The article talks about the idea behind this project to pre-heat the intake air that passes through the carburettor to increase a petrol engine's fuel efficiency. The vaporization of petrol in the carburettor is influenced by the humidity of the surrounding air. Therefore, vaporization can be facilitated, and full combustion can be accomplished by preheating the carburettor's incoming air for a significant amount of time. Additionally, by lowering the amount …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 8–13 Read article
-
Differential Scanning Calorimetry, Thermogravimetric Analysis, and Dynamic Mechanical Analysis for Advanced Medical Materials
Abstract: Modern healthcare depends on advanced medical products that come up with new ways to care for and help patients. Characterizing these products is important to make sure they are safe, effective, and work well. While there are many analysis methods, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and Dynamic Mechanical Analysis (DMA) are the most important ones for checking the temperature and mechanical qualities of medical materials. By measuring the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 57–72 Read article
-
Improved Thermal stability of Boron treated Coir MDF boards
Abstract: Coir fibre a biodegradable natural fibre extracted from the husk of the coconut (Cocos Nucifera L.), traditionally used for manufacturing ropes, carpets or mattresses is now being used for manufacturing composite panel boards and could extensively substitute for wood and engineered wood products whose applications ranges from packaging to construction materials. Coir composite panel board samples were chemically treated with preservative solutions carrying combinations of Borax and Boric Acid with …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 33–40 Read article
-
Boron Nitride Nanoplatelets and Aluminium Nitride Incorporated Organic Organic Eutectic Phase Change Materials with Enhanced Thermal Conductivity with Low-Loading Nanoadditives
Abstract: Miniaturized high performance electronic appliances generate tremendous heat during the duty cycle, has led research community to explore advanced thermal management strategies. Operating electronics at high temperature may result in malfunctioning of compact appliances. Thus, phase change materials (PCM) are applied to maintain isothermal temperature by implementing phase transition through latent heat. To improve the thermal conductivity and to deduce at suitable phase transition temperature of novel eutectic PCM, nanoplatelets …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–9 Read article
-
Excess Enthalpy of Mixing for Binary and Ternary System – A Review
Abstract: The thermodynamic properties of the mixtures containing hydrocarbon and ether are of significant attention in view of the fact that ethers are used as oxygenating agents in gasoline blending technology. Several oxygenated compounds are added to gasoline to enhance the octane number and to reduce air pollution. Excess enthalpy of mixing data of both binary and ternary system can be obtained by using various equipment and experimental procedures are reviewed. …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 1, 2014 · pp. 57–69 Read article
-
Nanocomposites of Polyethylene-Closite 20A: Preparation and Characteristics
Abstract: Low-density polyethylene/closite 20A nanocomposites with different organoclay contents were made in the current study by a melt mixing technique with two different compatibilizers of varying contents: low molecular weight oxidized polyethylene and low molecular weight trimethoxysilyl modified polybutadiene. The inclusion of compatibilizers and concentrations of organoclay were analyzed in relation to the mechanical and thermal properties of the nanocomposites. The dispersibility of the silicate clay in the nanocomposites was investigated …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 1, 2025 · pp. 01–12 Read article
-
Synthesis, Characterization and Drug Delivery Application of Poly (Acid Fuchsin) Based Triblock Copolymer
Abstract: Synthesis, characterization and its drug delivery application of Poly (acid fuchsin) (PAF) was done under inert atmosphere. The (M0/I0) was maintained at 100. In order to increase the molecular weight and processability, it was block copolymerized with ε-caprolactone (CL) and tetrahydrofuran (THF) separately. The conductivity value of PAF was found to be decreased after the chemical conjugation with poly(ε-caprolctone) (PCL) and poly(tetrahydrofuran) (PTHF) blocks. Thus obtained triblock copolymer was subjected …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 2, 2016 · pp. 33–43 Read article
-
Processing and Characterization of Ni2MnSn FSMA
Abstract: Among Ferromagnetic Shape Memory alloys (FSMAs), Ni2MnSn Heusler alloys owing to occurrence of large magnetic field induced strain (> 10%) along with other interesting properties like premartensitic transition, high transformation temperature, large magnetocaloric effect and low stress of twin variant rearrangement. The prominent challenges facing the design and utilization of these specialized alloys are a limited range of operating temperatures, phase transformations that have high sensitivity to variations in composition, …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 154–159 Read article
-
Electron beam irradiation studies of polyethylene maleic anhydride on their Chemical and Thermal properties.
Abstract: The electron beam (e-beam) irradiation effects on polyethylene maleic anhydride (MANPE) are investigated by spectroscopic and thermal methods. The MANPE irradiated with electron beam to a radiation dose of 30, 60 and 90 K Gy and the resultant changes in their chemical structure and thermal properties have been investigated by Electron spin resonance (ESR), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 17–30 Read article
-
Preparing Chitosan Hybrid Nanocomposites by Novel Additives for Wound Healing
Abstract: Biomaterials made from chitosan have been discovered to be particularly unique marine polysaccharides (or polycarbohydrates) with a wide range of physico-chemical and biological characteristics suitable for biomedicine field. Due to net positive charge of chitosan, it is essentially capable of chemically binding with negatively charged surfaces A biodegradable blend of chitosan nanoparticles (CHT), poly vinyl alcohol (PVA) and polyethylene glycol (PEG) hybridized with metal oxides nanopowders were prepared and used …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 9–23 Read article
-
Analysis of Thermo-Mechanical Properties in Cement Mortar Using Synthesized Silicate Microencapsulation of Phase Change Materials by Sol-Gel Process
Abstract: This investigation delves into improving building thermal comfort using microencapsulated phase change materials (PCM@SiO2) in cement mortar. The encapsulation process, achieved via a sol-gel method, envelops PCM in a silicate shell Differential Scanning Calorimetry (DSC) and Fourier-Transform Infrared Spectroscopy (FTIR) were used to confirm the thermal properties and integrity of encapsulated PCM, which showed an encapsulation efficiency of 92.7% and a thermal storage capacity of 99.7%. The study involved the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 152–160 Read article
-
Zn Doped CuO Nanoparticles for Increasing the Longevity of The Agricultural Products †
Abstract: Nanotechnology is an enabling technology at the service of mankind. Indeed, enhancing the long-term storage of agricultural products (post-harvest during transportation and storage) in general and apples and tomatoes, in particular, is a challenge. Zn-doped CuO is a proven nanomaterial with special ability to kill plant pathogens as well as a variety of microorganisms (bacteria, virus, and fungus). Much of the review is focused on the landmark papers published by …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 1, 2024 · pp. 14–29 Read article
-
A Strategy of Nano-Calcite Fillers for Enhancing the Mechanical and Thermal Properties of Polypropylene Polymers
Abstract: Particulate polymer composites have gained popularity because of their many uses. For some, using high loadings to achieve desired attributes without compromising the material's mechanical properties or restricting its processability is desirable. It is possible to use surface active agents to improve characteristics and increase solid loading. Interface characteristics in highly packed particulate composites based on nano-calcite (nano-calcium carbonate) and polypropylene as a binder are the focus of the current …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 1, 2025 · pp. 20–29 Read article
-
Solid Lipid Nanoparticles in Medicine: Formulation, Characterization and Future prospects
Abstract: An alternative to conventional colloidal carriers such liposomes, polymeric nanoparticles, and emulsions, solid lipid nanoparticles (SLNs) were created in the early 1990s. Benefits include targeted medicine distribution, controlled drug release, and improved stability. An extensive review of the excipients utilized, the production techniques, including the membrane contractor approach, and the possible advantages and disadvantages of SLNs is given in this work. It investigates secondary stabilization techniques like freeze-drying and spray-drying, …
Published in International Journal of Membranes · Vol. 2, Issue 1, 2025 · pp. 1–15 Read article
-
Fabrication and Characterization of Almond Skin Powder Reinforced PLA Based Composite Filaments for Fused Filament Fabrication
Abstract: Researchers around the globe are increasingly utilizing recycling methods to address waste generated from polymers, spurred by the dire need to deal with environmental challenges promoting sustainable practices. Polymers are having highly-stable long-chain polymer structure which makes it difficult to degrade easily posing many environmental and health challenges, hence, recycling of the polymers is the sole method to mitigate harmful effects. However, there has been relatively little focus on producing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 530–539 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
High-Performance Aluminum Matrix Composites Reinforced with Graphene Nanoplatelets a Study on Mechanical and Thermal Behaviour
Abstract: This study investigates the effect of graphene nanoplatelets (GNPs) on the mechanical and thermal properties of aluminum matrix composites (AMCs) fabricated using the powder metallurgy route. Aluminum alloy Al-6061 powder was reinforced with varying GNP concentrations (0, 0.5, 1, 2, and 3 wt%), followed by uniaxial compaction and sintering. The influence of GNP content on the composite’s structural integrity, strength, and thermal behavior was thoroughly evaluated through tensile testing, hardness …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 38–49 Read article
-
Thermally Regulated Polymer-PCM Composites for Efficient Solar Energy Harvesting and Storage
Abstract: This study investigates the development of high-performance; shape-stabilized polymer composites infused with phase change materials (PCMs) for thermal energy storage in solar energy applications. Polyethylene glycol (PEG-6000) was employed as the core PCM due to its high latent heat and suitable melting point, while high-density polyethylene (HDPE) served as the supporting polymer matrix to provide structural stability. One of the primary limitations of PEG-based PCMs is their inherently low thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 153–163 Read article
-
Engineering Sustainable Interior Materials: Performance Analysis of PLA Composites Reinforced with Banana Stem Fiber and Spent Coffee Grounds
Abstract: This study presents the development and classification of eco-friendly composite panels reinforced with spent coffee grounds (SCG) and banana stem fibers (BSF) for interior applications. Hybrid composites were fabricated using polylactic acid (PLA) as the matrix with a constant filler loading of 30 wt%, varying BSF:SCG ratios (70:30, 60:40, 50:50). Mechanical testing revealed that the 70:30 composite exhibited the highest tensile strength (42 MPa) and flexural strength (58 MPa), whereas …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 94–105 Read article
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article