Search
21 articles for “Nano-TiO2”
-
TiO₂ Nanostructured Material-based Gas Sensor for Detecting Oxygen and LPG Gases
Abstract: This Paper investigates the use of TiO2 nanowires and nanotetrapods on glass and silicon substrates for sensing combustible gases such as LPG (Liquid Petroleum Gas) and Oxygen. The growth of Titanium dioxide (TiO2) nanowires/nanorods/nanotetrapods was investigated using both physical and chemical methods. In thermal evaporation method, both with and without vacuum conditions, was employed to synthesize various TiO2 nanostructures. A vacuum coating machine was utilized to create uniform TiO2 thin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 443–451 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Preparation and Characterization of TiO2 Nanoparticles by Green Method
Abstract: In this study, we attempted to synthesize TiO2 nanoparticles utilizing titanium tetrachloride as a precursor and an aqueous extract of Sansevieria plant leaves. Atomic force microscopy (AFM), X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) analysis were used to identify the synthesized TiO2 nanoparticles As per the surface topography, the average diameter of nanoparticles is considered as 67.73 nm. Debye-Scherrer equation was …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 61–67 Read article
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2
Abstract: In this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. Nanoparticles of Al2O3 and TiO2 were characterized by SEM and EDS. The high peaks showed the respective presence of aluminium, oxygen for alumina and titanium and oxygen for titanium dioxide. The two samples of nano-cutting fluids were prepared. Alpha alumina, α-Al2O3 nanoparticles were used for the preparation of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 329–338 Read article
-
Dye Sensitized Solar Cells Based on Extracted Natural Dyes and Synthetic Dyes with Nanocomposite Material
Abstract: Producing dye sensitised solar cells in their original colours required a number of different techniques. Plants and berries were used to extract these dyes. The DSSCs were manufactured by recycling the old dyes. It was clear that the efficiency of the power conversion was deteriorating. TiO2 mesoporous films' potential applications were also studied. This study employed electrochemical impedance spectroscopy to examine the interactions of natural dyes with TiO2. Bi2O3 nanoparticles …
Published in Journal of Polymer & Composites Read article
-
Preparing Chitosan Hybrid Nanocomposites by Novel Additives for Wound Healing
Abstract: Biomaterials made from chitosan have been discovered to be particularly unique marine polysaccharides (or polycarbohydrates) with a wide range of physico-chemical and biological characteristics suitable for biomedicine field. Due to net positive charge of chitosan, it is essentially capable of chemically binding with negatively charged surfaces A biodegradable blend of chitosan nanoparticles (CHT), poly vinyl alcohol (PVA) and polyethylene glycol (PEG) hybridized with metal oxides nanopowders were prepared and used …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 9–23 Read article
-
Environmental implications of Chitosan nanostructures.
Abstract: Chitosan (CS), as a biopolymer, has unrivalled chemical and mechanical modification capabilities to develop novel characteristics, functions, and applications, particularly in the manufacture of cutting-edge membrane adsorbents. Membrane adsorbents utilizing carbon starch (CS) have emerged as a viable and efficient engineering instrument for eliminating diverse pollutants from aquatic settings, including heavy metals and dyes. To date, much study has been directed towards improving the adsorptive characteristics, permeability, physicochemical stability, and …
Published in International Journal of Antibiotics · Vol. 1, Issue 1, 2024 · pp. 42–58 Read article
-
Applications of Nanomaterials in Membrane Separation for Effluent Treatment in the Textile Industry
Abstract: The textile industry makes a significant contribution to economic growth. As the global population continues to increase exponentially, production rates are also on the rise to meet this growing demand. Unfortunately, this surge in production often leads to noncompliance with environmental regulations. While the textile industry supports economic development, it also contributes to serious pollution. Various dyes, such as azo dyes, Congo Red (CR), Crystal Violet, methylene blue, and methyl …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 1–8 Read article
-
Effectiveness of PTFE-Based Nano-coatings in Improving Corrosion and Wear Resistance of Stainless Steel
Abstract: Polytetrafluoroethylene (PTFE) has emerged as a highly effective material for enhancing the durability and performance of metal surfaces, particularly in environments requiring superior corrosion resistance and low friction. This study investigates the application of PTFE coatings on various metallic substrates, with a focus on stainless steel and carbon steel, to improve their corrosion resistance, wear protection, and tribological performance. Utilizing advanced deposition techniques such as sol-gel and plasma spray, PTFE …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 32–38 Read article
-
Electrooxidation of Methylene Blue over nanoparticle coated DSA synthesized by sol-gel method
Abstract: The current study uses the sol-gel approach to synthesize a new Dimensionally Stable Anode (DSA) covered with nanoparticles. The objective is to enhance the electrocatalytic activity and overall performance of the anodes in treating synthetic industrial wastewater containing reactive dyes. CuO and TiO2 nanoparticles are coated using a thermal decomposition technique on a titanium electrode. The DSA surface gains more surface area and better catalytic capabilities when nanoparticles are coated …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 34–43 Read article
-
Optimizing Glass to Metal Composite Seal Performance: An integrated Approach with Artificial Neural Network, Multiple Regression, and Taguchi
Abstract: Composite materials, particularly glass to metal composites, are critical components in solar receiver tubes, where vacuum leakage can significantly compromise the efficiency of solar plants. This research addresses the technical barriers associated with the development of durable and high-quality glass to metal composite seals. We investigate the principles that can enhance the physical and chemical properties of these composite seals, focusing on the incorporation of TiO2 and MgO nanoparticles into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 418–435 Read article
-
Analyzing the Performance and the Emission Characteristics of Palladium Catalyst using different blends of Methanol Fuel and Nano Particles of Aluminium and Titanium Oxides
Abstract: The high cost and limited availability of precious metals prompted the automotive industry to explore alternative materials for improving catalytic converter performance. This research focuses on the development and optimization of catalytic converters designed to reduce exhaust emissions, ensuring compliance with market needs and regulatory standards. Specifically, it investigates the three-way catalytic converter in a four-stroke engine utilizing commonly available noble metals, particularly palladium as the catalyst. The best way …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1505–1517 Read article
-
Effect of Nano-Additives on the Emissions, Performance, and Combustion Characteristics of Syzygium cumini (Jamun) Biodiesel Powered DI Engine
Abstract: Renewable and cleaner diesel engine fuel has received a lot of attention recently as a result of the depletion of fossil resources. To address this issue, biodiesel can be a potential substitute for diesel fuel. The finest B20 Jamun blends were combined with three different types of nanoadditives to create Syzygium cumini (Jamun) biodiesel, which was tested in a naturally aspirated diesel engine. Global researchers are starting to develop new …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 77–82 Read article
-
CFD Analysis of Six-Flow Microchannel Heat Sink Using the Different Nanofluid
Abstract: In this study, we compare the heat-conveying capabilities of ordinary water with those of cooling fluids such as Ag-Water, TiO2-water, and Al2O3-water nanofluid at a volume percentage of 0.50%, and we also examine the six flow micro-channels of the fin-equipped heat sink. Hardware like microprocessors and integrated circuits are not used in the comparison. To evaluate the effectiveness of different cooling fluids, a number of thermal metrics are used, such …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 1–11 Read article
-
A comprehensive review on Sustainable Pathways to Synthesize 2, 5-Furandicarboxylic Acid (FDCA) from 5-Hydroxymethylfurfural (HMF) via Oxidative Processes
Abstract: The increasing global concern over the environmental impact of traditional plastics derived from petroleum and natural gas has spurred a search for more sustainable alternatives. Bioplastics, which are derived from renewable sources and may be biodegradable, have garnered significant interest as eco-friendly materials. Among the promising building blocks for bioplastics, 2,5-Furandicarboxylic Acid (FDCA) has emerged due to its potential to enhance polymer properties. One key precursor for bioplastics, 5-Hydroxymethylfurfural (5-HMF), …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 01–13 Read article
-
Development of Novel Materials with Photocatalytic Effect
Abstract: For capturing solar energy and for converting it into electric power, it is utmost essential to design materials that can be used for this purpose. Generally, the materials deployed for converting solar energy into electric energy are sensitive to UV-radiation. If the material used for this purpose are sensitive to visible light, it will be the breakthrough research. It has been a challenge to design materials with novelty of being …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 2, 2023 · pp. 25–39 Read article
-
Comparative study of the Antibacterial Properties of Modified Textile Materials with Different Metal Nanoparticles
Abstract: A number of metal particles have proven antibacterial properties. In this study, a comparative analysis was made of two types of metal particles: zinc oxide and titanium oxide nanoparticles respectively, which were deposited on cellulose material and were fixed by means of a cross-linked gelatin hydrogel. Three methods were applied under different reaction conditions for obtaining the biocomposite materials. The biomaterials were investigated by means of scanning electron microscopy, transmittance …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 92–101 Read article