Search
32 articles for “NaOH”
-
Investigating The Mechanical Properties of Sisal/Areca/Sisal Natural Fiber Reinforced Composite Material Treated with NaOH and Filled with Al2O3 and Tio2
Abstract: Biopolymer-based composites which are obtained from the natural resources like plants, animal or mineral based have recently attracted significant interest because they can be used in interesting ways in biology and materials science. These materials are generally non-toxic, reusable, and recyclable, which are useful in many situations where sustainability and environmental protection are important. Plant Based fibers like Bamboo, Coir, Kenaf, Banana, Sisal, hemp and jute are proving their potentiality …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 413–425 Read article
-
Evaluation of Tectona Grandis Leaf Extract As A Green Corrosion Inhibitor for Aluminium in 1M NaOH
Abstract: A kind of tropical hardwood tree called the Tectona grandis tree that is indigenous to India. The name "teak tree" is another common name for this kind of tree. It is a member of the plant family that is referred to as Lamiaceae. The primary purpose of this research is to investigate whether or not the plant extract has a corrosion-inhibiting quality. In this study, an aqueous extract of Tectona …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 41–50 Read article
-
Optimisation of Biodiesel synthesis process from various edible oils using KOH and NaOH as homogeneous catalysts
Abstract: In the present experimental study, an optimization of biodiesel production from different kinds of edible oils (Palm oil, Cotton-seed oil and Sunflower oil) using KOH & NaOH as homogenous catalyst has been investigated by one step transesterification method. The research study was conducted into two parts. In the first experimental study, different types of edible oils (Sunflower oil, Cottonseed oil and Palm oil) have been optimised using KOH and NaOH …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 69–77 Read article
-
Eco-Friendly Tri-Layer Hybrid Composites: A Sustainable Approach to Polymer Matrix Materials
Abstract: In the current study, we explored the use of environmentally friendly natural fibers such as sisal, banana, and kevlar. These fibers were fabricated by hand lay-up technique, and their impact on tensile and dynamic properties was evaluated according to ASTM standards. The assessment was conducted under both dry and wet conditions, considering two different chemical dosage parameters for comparison. Additionally, the tri-layer fibers underwent two separate chemical treatments using 1% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 195–205 Read article
-
Investigation on Mechanical Properties of Geo Polymer Concrete With Fly Ash and Steel Fibers
Abstract: The goal of this project was to manufacture fly ash-based geopolymer concrete (FAC), a more environmentally friendly substitute for conventional Portland cement concrete (OPC) by using fly ash (FA) in place of cement. The study discovered that the properties of FAC were comparable to those of OPC, and that the concrete's performance was greatly impacted by the geopolymer's polymeric nature. The geopolymerization process was started with an alkaline solution, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 250–260 Read article
-
Improving Black Cotton Soil with Sodium Hydroxide and Fly Ash: An Assessment of Optimum Moisture Content, Dry Density, and California Bearing Ratio
Abstract: This study investigates the stabilization of Black Cotton Soil (BCS), an expansive clayey soil primarily composed of montmorillonite minerals, using sodium hydroxide (NaOH) and fly ash. Due to its high plasticity and significant volume changes with moisture, BCS is challenging for construction purposes. Adding NaOH and fly ash can potentially improve the soil's moisture tolerance, compressibility, and reduce its plasticity, making it more suitable for structural applications. The research evaluates …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 192–201 Read article
-
Experimental Investigation and Surface Morphology Study on Areca Fiber Composite Material
Abstract: Composites manufactured from areca fibers had their characteristics assessed in recent research. Shape and size were determined by cutting the stem. It takes six months to dry the fibers once they are taken from the tree stem. Because pectin, cellulose, hemicellulose, and lignin make up the bulk of it. It has great regeneration capacity and is a resource material made of wood fibers. The untreated and chemically treated fibers are …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 459–468 Read article
-
Investigation on the mechanical characteristics and productivity of GGBS based geopolymer mortars
Abstract: It has been known for decades that geopolymer will significantly replace cement's function in construction industry. Geopolymer has low creep and shrinkage and a peak compressive strength. That is as per a recent study, geopolymer mortar is made by Fly ash and GGBS. The composition includes (100-60%) GGBS with a 10% substitution of fly ash. Alkali activators used in the research are sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). In …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 253–264 Read article
-
Influence of Alkali Treatment on the Tensile Properties of The Hybrid Fiber Reinforced Polymer Matrix Composite
Abstract: In this study, the effect of alkali treatment on the tensile strength of the hibiscus fiber, gongura fiber, and treated madar fiber-reinforced Polymer Matrix Composite (PMC) is studied. The Sodium Hydroxide (NaOH) solution is utilized for madar fiber treatment. The traditional hand layup methodology was used for fabrication. The influence of tensile property control variables such as duration of fiber treatment, concentration of NaOH for treatment, and proportion of fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 28–34 Read article
-
Synthesis and Characterization of Short Fiber Reinforced Biocomposite Materials
Abstract: The fabrication and characterization of a biocomposite reinforced with banana fiber is proposed in this proposal. The substance used for the grid was epoxy. Hand-layup preparation was the last step in the biocomposite's manufacturing. Biocomposites with various fiber and grid compositions were produced. After treating banana strands with NaOH in the composites manufacturing process, a comparative analysis between biocomposites reinforced with treated and untreated filaments was conducted. The antacid treatment …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 42–53 Read article
-
Investigation of Sulphate, Alkali and Carbonation Chemical attack in GGBS-Based Geopolymer Concrete and OPC Concrete
Abstract: This study presents a comparative evaluation of the durability of GGBFS-based Geopolymer Concrete (GPC) and OPC concrete in rapid carbonation, sulphate, and alkali environments. All samples were subjected to three severe conditions are carbonation at 4% CO₂, 25°C and 60% relative humidity, exposure to a 10% sodium sulphate (Na₂SO₄) solution, and immersion in a 10% sodium hydroxide (NaOH) solution for alkali resistance. The durability characteristics were evaluated by the compressive …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 13–35 Read article
-
Development and Characterization of Bottom Ash–Fly Ash–GGBS-Based Geopolymer Composites for Sustainable Applications
Abstract: The growing demand for sustainable construction materials has spotlighted geopolymer concrete (GPC) as an environmentally viable substitute for conventional cement-based systems. This study presents an innovative dual-waste valorization approach, integrating pulverized bottom ash (BA) and ground granulated blast furnace slag (GGBS) as binders while replacing sodium silicate (Na₂SiO₃) in the alkaline activator with treated textile effluent. Unlike prior works that focus solely on solid waste incorporation, this research pioneers the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 32–42 Read article
-
Structural Modification of Sugarcane Bagasse using Alkaline, Acid, and Bleaching Pretreatments for Enhanced Yield of Poly (1→4)-β-D-glucopyranose (Cellulose) and Hemicellulose for Utilization as Biocomposites
Abstract: Sugarcane bagasse, a lignocellulosic byproduct generated in substantial quantities by the sugar industry, represents a promising feedstock for the sustainable production of enzymes and bio-based chemicals. Its high (1→4)-β-D-glucopyranose (cellulose) content, abundant availability, and low cost make it an ideal candidate for bioconversion processes. However, the inherent recalcitrance of bagasse, primarily due to its lignin-rich matrix, necessitates effective pretreatment strategies to enhance enzymatic digestibility. This study presents a comparative investigation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 983–992 Read article
-
Development and Mechanical Characterization of Polymer based Bio Composite Filaments for FDM Applications
Abstract: Additive Manufacturing (AM) is an advanced fabrication process capable of producing complex and intricate components to meet diverse industrial and customer demands. For small-scale producers and researchers, FDM is the most straightforward, affordable, and easily accessible of the several AM processes. The majority of conventional polymer feedstocks used in FDM lack sufficient mechanical strength and thermal stability, which limits their use in load-bearing or structural components. This effort aims to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 743–751 Read article
-
Optimized Utilization of Kota Stone Slurry Waste in Fly Ash–Based Geopolymer Mortar: A Taguchi-Driven Approach
Abstract: The large-scale generation of stone-processing wastes presents a critical sustainability challenge and an opportunity for value-added reuse in construction materials. This study develops a high-performance fly ash geopolymer mortar by partially replacing Class F fly ash with Kota stone slurry waste (KSSW) and optimizing the key mix parameters using a Taguchi design framework. Five governing factors—binder replacement level, NaOH molarity, sodium silicate–to–sodium hydroxide ratio (SS/SH), curing temperature, and alkaline solution-to-binder …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 426–445 Read article
-
Productions and Characterization of Biodiesel by Base Catalyzed Transesterification Reaction from Dairy Waste Scum of DEI Dairy, Agra
Abstract: With the increase in prices and rapid depletion of petroleum-based fuels, the investigation is being done to look over an alternative fuel source. Presently, the biodiesel is mainly produced from vegetable sources such as jatropa oil, karanja oil, rapeseed, soybean, and others that could overlap with nutritional requirement of the society if produced at large scale. Also, the production cost of biodiesel from vegetable and animal sources is very high …
Published in Research and Reviews : Journal of Dairy Science and Technology Read article
-
Radon Estimation in Some Lakes and Fraser River Water of British Columbia, Canada using LR-115 Type II Alpha Track Detector
Abstract: Radon activity levels were measured in the five Lakes and Fraser River water samples collected from different locations of British Columbia in Canada. The purpose of this study was to compare Radon activity levels in all six sources of water. Water was collected in air tight bottles and stored for two weeks before investigation. LR-115 Type II nuclear track detectors of 1.2 cm2 were used for recording radon alpha tracks. …
Published in Research and Reviews: A Journal of Toxicology Read article
-
Experimental Investigation of Date palm Leaf Fiber reinforced with polymer matrix composite.
Abstract: The demand for composites incorporating robust fibers is significant across diverse industries, driven by the favorable attributes of strength, lightness, and cost-effectiveness. Within GCC countries, date palm (DP) serves as a valuable source of cellulosic fibers, highly esteemed for its widespread availability. These fibers can be sourced from midribs, spadix stems, leaflets, and mesh. Date palm leaf fibers are becoming more and more popular as a way to strengthen composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 40–48 Read article
-
Assessing the Permeability of Bentonite with Sand, Marble Dust, and Fly Ash mixture with and without Effect of Permeate Solution for the Development of Efficient and Cost-Effective Landfill Liner for Sustainable Waste Management and Environmental Preservation
Abstract: This exploration paper researches the capability of further developing landfill liner materials by integrating varying percentages of bentonite into sand, marble dust, and fly ash mixtures. The study focuses on determining whether these mixtures are suitable for development of landfill liner by examining their permeability properties. Bentonite, a clay known for its high swelling and sealing properties, is added to sand, marble dust, and fly ash at different range from …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 1–11 Read article
-
Influence of Agitation and Static Cultivation on Physicochemical Characteristics of Bacterial Cellulose Produced by Gluconacetobacter liquefaciens MTCC 3135
Abstract: Bacterial cellulose (BC) a with applications spanning biomedical, food, paper, electronics, and diverse industrial processes. Its unique properties include high purity, biocompatibility, and flexibility. BC is a versatile natural biopolymeric material, secreted by certain acetic acid bacteria. BC has numerous benefits over plant cellulose due to distinctive features, e.g., higher polymerization degree and purity, superior crystalline structure, water retention, biocompatibility, and biodegradability, which make BC a valuable material in creating …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 14, Issue 2, 2024 · pp. 1–11 Read article