Search
21 articles for “EDX”
-
Experimental Analysis of Nano-carbon Doped Alumina for Industrial Applications
Abstract: The use of nano-carbon metal matrix composites can provide a solution to the enduring issue of optimal material selection and optimization for getting metal-insulator transition (MIT) behavior at a particular frequency at ambient temperature. Other substances, like two-dimensional (2D) transition metal dichalcogenides (TMD), vanadium oxide (VO2), and germanium telluride (Ge-Te), have difficult challenges in achieving effectively the MIT property at a given frequency and temperature. It is also difficult to …
Published in Journal of Polymer & Composites Read article
-
Dielectric Studies of 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 Nanoceramic Fabricated by Chemo-mechanical Process
Abstract: The present investigation is aimed toward investigate a straightforward, inexpensive, and environmentally friendly chemo-mechanical method for preparing high-dielectric materials, specifically 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 (BCT-CCTO), by combining metal nitrate combustion with solid TiO2 powder and titanium isopropoxide, Ti (OR)4. The composite was prepared by the mixing of individual materials of Ba0.8Ca0.2TiO3 and CaCu3Ti4O12 through the chemo-mechanical method. Initially, 99% pure Ba (NO3)3, Cu (NO3)2∙3H2O, TiO2 and glycine were taken in their stoichiometry ratios. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–21 Read article
-
Analysis of C45 Steel Machining with Differentiated Tool Bits
Abstract: The tool material may be coated or uncoated, and cutting inserts are typically situated along the covered contact region. Work piece remains fixed while tool revolves for cutting and machining. Objective: A NABL-accredited metallurgical evaluation laboratory (machining) assessed two specimens. Machining profile and materials determine insert selection. Analytical results show material composition. The surface qualities of samples 1 and 2 were examined. As DOC, cutting speed and tool tip temperature …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 244–252 Read article
-
Synthesis and Functional Group Analysis of Solution Processed Zinc Oxide Thin Film Grown on Polyethylene Terephthalate
Abstract: Flexible electronics field is growing every day. Existing technology is facing issues like brittleness, toxicity, inadequacy. Fabrication cost increases in processing of such materials. In this work, zinc oxide nanoparticles synthesized by solution processing technique were used to grow 120nm thick thin film (TF) on Polyethylene terephthalate (PET). This method reduces the processing cost and Zinc Oxide (ZnO) is cheaper and abundant in comparison to other semiconductors option. Material was …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 56–66 Read article
-
Biosynthesis of Zinc Oxide Nanoparticles and Their Revolutionary Impacts on Agroindustry: Review
Abstract: Nanotechnology is a new approach of science which provides alternative tool in many fields including agriculture. This comprehensive review focuses on the biosynthesis and characterization of zinc oxide nanoparticles (ZnO NPs), highlighting their vast potential in agroindustry applications. Unlike traditional physical and chemical methods, which are often costly, time-consuming, and involve hazardous materials, this review explores the promising biological synthesis routes, offering a more sustainable and eco-friendly alternative for producing …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 2, 2024 · pp. 33–50 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Dye Sensitized Solar Cells Based on Extracted Natural Dyes and Synthetic Dyes with Nanocomposite Material
Abstract: Producing dye sensitised solar cells in their original colours required a number of different techniques. Plants and berries were used to extract these dyes. The DSSCs were manufactured by recycling the old dyes. It was clear that the efficiency of the power conversion was deteriorating. TiO2 mesoporous films' potential applications were also studied. This study employed electrochemical impedance spectroscopy to examine the interactions of natural dyes with TiO2. Bi2O3 nanoparticles …
Published in Journal of Polymer & Composites Read article
-
Characterization of Al6082 and Magnesium AZ3lB Composite Produced by The Friction Stir Additive Manufacturing
Abstract: In this modern era, lighter and stronger materials are needed. This is especially true for materials needed in aerospace, robotics, light aircraft, defence, and transportation. When comparison to backbone products in order composite goods have a higher durability & stiffness-to-weight proportion .Most of the newer fabricating methods, called friction stir additive manufacturing (FSAM), uses solid-state drives friction stirring technology to produce bilayer structures by sequentially fusing discrete strata. In this …
Published in International Journal of Manufacturing and Production Engineering · Vol. 1, Issue 1, 2023 · pp. 1–14 Read article
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Au@Sio2@PVP-DCMD Membranes: A Breakthrough in Heavy Metal Removal and Antibacterial Defense
Abstract: This study investigates the development and characterization of multifunctional gold-doped silica (Au@SiO₂) membranes for water distillation and antibacterial applications. The manufacturing process integrated gold nanoparticles into silica matrices using sol-gel techniques. Structural analysis was conducted using SEM (showing uniform pore distribution with an average pore size of 40-50 nm), FTIR (confirming Si-O-Si and Si-Au-Si bonding peaks at 525 cm⁻¹ and 1310 cm⁻¹ respectively), EDX (revealing gold nanoparticle content of 1.5 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 13–27 Read article
-
Preparation and Characterization of PVA-MgO Nanocomposite Films
Abstract: In this work, Magnesium Oxide Nanoparticles (MgO NPs) doped with 3 g of polyvinyl alcohol (PVA) at different weight percentages (0, 2, 4, 6, and 8 wt.%) using the solvent casting method, to fabricate thin PVA-MgO nanocomposite (NC) films. These films were characterized by (i) XRD, SEM, EDX, DLS, and Zeta Potential for morphological studies, (ii) FTIR spectra and UV-Visible techniques for spectroscopic studies and (iii) DSC for thermal studies. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 40–62 Read article
-
Multifunctional and Photocatalytic Properties of DyFeO₃/Dy₃Fe₅O₁₂ Biphasic Nanoparticles
Abstract: Rare-earth orthoferrites constitute a class of compounds that exhibit remarkable magnetic, optical, and electronic properties across a wide temperature range. In the present study, a dysprosium-based orthoferrite containing dual phases of DyFeO₃ perovskite and Dy₃Fe₅O₁₂ garnet was successfully synthesized via the co-precipitation technique. X-ray diffraction (XRD) analysis was employed to investigate the structural configuration of the synthesized material. The diffraction pattern confirmed the formation of a biphasic composite comprising orthorhombic …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 41–54 Read article
-
Adsorptive Removal of Rhodamine-B Using Eco- Synthesized Green Tea–Aluminium Nanoparticles
Abstract: This study examines the use of Green Tea–Aluminium Nanoparticles (GT-Al NPs), a unique and eco-friendly adsorbent, to remove the dangerous Rhodamine-B dye from water. For characterisation, SEM, FTIR, TGA, and EDX were employed. We evaluated the effects of pH, temperature, dosage, contact time, and initial dye concentration on adsorption efficiency. First- and second-order pseudo models were used to characterize adsorption kinetics, and the Langmuir model explained equilibrium, as well as …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 3, 2025 · pp. 61–72 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Ag₂S–Ag Nanocomposites: A Bottom-Up Approach to Enhance Thermoelectric Power Factor at Near Room Temperature
Abstract: The intrinsic ductility, low toxicity, and naturally occurring abundance of silver sulphide (Ag₂S) have made it a potential thermoelectric material in recent years. However, high electrical resistance severely limits its practical application. Here, we present a thorough analysis of how metallic Ag nanoinclusions affect the structural, electrical, and thermoelectric characteristics of Ag₂S nanocomposites made using a simple bottom-up polyol approach. (Ag₂S)₁₋ₓAgₓ nanocomposites with an Ag content ranging from 0 to …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 40–55 Read article
-
Green Synthesis and Functional Evaluation of Ag–Polypyrrole/TeO2 Nanocomposites for Advanced Electronic Applications
Abstract: Ag–PPy/TeO₂ nanocomposites with TeO₂ loadings ranging from 2% to 10% were synthesized using an in-situ chemical polymerization method. Green tea extract, rich in phytochemicals, acted as both a reducing and stabilizing agent to facilitate the formation of metal oxide nanoparticles. The structural and morphological characteristics of the nanocomposites were analyzed using FTIR, PXRD, and SEM techniques. FTIR confirmed the successful integration of Ag, TeO₂, and PPy functional groups. PXRD patterns …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 64–76 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article