Search
920 articles for “Bars”
-
Performance of GFRP Bars in Flexural Members: A Comparative Study with Metal Bars Using FEA and Experimental Study
Abstract: In recent years, GFRP bars have been introduced as a replacement for metal bars as reinforcement in flexural members. This study evaluates the use of GFRP bars as the main reinforcement in flexural members such as beams through computer simulations and experimental work. A 4-meter beam from a sample structure, analyzed as per IS 875 (1987) Part 2, was considered for the study. This beam was designed considering both metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 262–267 Read article
-
Research Paper on Design and Analysis of an Anti-roll Bar
Abstract: An anti-roll bar is a component of many automobile suspensions that aids in reducing body roll during fast cornering or over road irregularities. It connects opposite wheels (left/right) via short lever arms linked by a torsion spring. An anti-roll bar is part of an automobile suspension system which limits the body roll angle of the vehicles. It is a U-shaped metal bar that connects opposite wheels together through short lever …
Published in Trends in Machine design · Vol. 9, Issue 1, 2022 · pp. 1–8 Read article
-
Laboratory permeability and single ring infiltration tests for the testing of waterproofing barriers of landfill tanks.
Abstract: Hydraulic conductivity is a fundamental hydrogeological parameter for the testing of waterproofing barriers of landfill tanks. These barriers are aimed at guaranteeing the isolation of the waste and preventing the infiltration of the percolate in the subsoil.Geotechnical features of mineral barriers must be preliminarily established through geotechnical laboratory tests in order to verify their suitability for their application.The main mineral barriers correspond to the bottom waterproofing of the landfill tanks …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 2, 2020 · pp. 29–37 Read article
-
Prosthodontics Rehabilitation of a Completely Edentulous Patient with Customized Bar and Loop Supported Overdenture: A Clinical Report
Abstract: Rehabilitation of the completely edentulous patient is still considered the most challenging job from the general dentist as well as from the prosthodontist point of view. As it is very difficult for the patient to get adapted to the complete denture after losing the natural teeth. Hence when the patient comes to the dentist with the complaint of inability to eat with present teeth and the operator diagnosed the case …
Published in Research and Reviews: A Journal of Dentistry · Vol. 14, Issue 1, 2023 · pp. 1–6 Read article
-
Bond Response of RCC Cube by using Glass Fiber Reinforced Polymer Bar
Abstract: The results of an experimental examination into the flexural and bond characteristics of Glass fibre reinforced polymer material in structural concrete are presented in this paper. In this study, glass fibre reinforced polymer bars of varied diameters were used. The performance of these bars with full and partial steel bar replacement is investigated. The major goal of this inquiry is to use Glass fibre reinforced polymer bars in water retaining …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 1–6 Read article
-
Barg-e-Tulsi (Ocimum sanctum Linn.) in Unani Medicine: Bridging Classical Therapeutics with Contemporary Pharmacological Evidence
Abstract: In the Unani System of Medicine (USM), Barg-e-Tulsi (Ocimum sanctum Linn.), commonly known as Tulsi or Holy Basil, is a highly valued medicinal herb that has been extensively used for centuries in the prevention and treatment of various ailments. It occupies an important place in traditional Unani therapeutics due to its broad spectrum of medicinal properties and its effectiveness in managing respiratory, gastrointestinal, neurological, and infectious disorders. Classical Unani scholars …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 13, Issue 2, 2026 · pp. 20–29 Read article
-
Air Flow Analysis on a Barrel Carburetor and a Barrel Intake Manifold
Abstract: The experiment performed was to determine air flow, velocity, pressure and turbulence through an adaptor plate between a 2-barrel carburetor and a 4-barrel intake manifold. We first created the part using SolidWorks making sure to include 2 body parts that allowed a smooth transition of air through the intake. We then uploaded an assembly instead of a singular part to ANSYS to ensure the airflow read was accurate, as well …
Published in Recent Trends in Fluid Mechanics · Vol. 9, Issue 3, 2022 · pp. 27–23 Read article
-
Standardization of Barg-e-neem (Azadirachta indica)
Abstract: The leaves of Azadirachta indica are commonly used medicinally in number of herbal products and herbal medicines The objective of the current study is to standardise Azadirachta indica leaves through qualitative and quantitative evaluation of various extracts. Physio-chemical analysis like determination of the pH value, determination of loss on drying, total ash value, acid insoluble ash value, different extractive values and presence of heavy metal was done on powdered leaves …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 12, Issue 1, 2023 · pp. 19–24 Read article
-
Investigation of Local Weighting Materials as a Substitute To Barite In Drilling Mud Formulation
Abstract: Weighting materials are important components needed to increase the density of drilling mud in order to provide enough hydrostatic pressure to balance abnormalpore pressures. In Nigeria, millions of dollars are spent annually in importing barite to serve this purpose. However, there exists large reserves of weighting materials such as barite, hematite, dolomite, calcite, ilmenite in Nigeria hence the need to investigate the suitability of these materials as substitute for imported …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 39–48 Read article
-
Barriers Towards Implementation of Caring, Respectful and Compassionate Healthcare Practice in Tigray Regional State, Ethiopia: A Qualitative Study
Abstract: Background: Patient-centered care is a type of care that is respectful, responsive to the preferences and values of patients. Though policy-makers increasingly adopt systems to enhance person-centred care for patient’s empowerment and improvement of the quality of care, the barriers to implement must be identified continuously so as to give a timely solution. Objective: The aim of this study was to explore barriers towards implementation of caring, respectful and compassionate …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 7, Issue 3, 2018 · pp. 33–38 Read article
-
Effect of Skin Barrier Damage on Absorption and Action of Cosmeceuticals
Abstract: The skin acts as a primary defensive barrier protecting the human body against environmental aggressors, microbial invasion, and chemical exposure. The integrity of the skin barrier, particularly the stratum corneum, plays a crucial role in regulating the permeation of substances applied topically. Cosmeceuticals, a hybrid category between cosmetics and pharmaceuticals, are designed to deliver biologically active ingredients into the skin to exert therapeutic or beneficial effects. However, the condition of …
Published in Recent Trends in Cosmetics · Vol. 3, Issue 2, 2026 · pp. 1–19 Read article
-
Presentation Delay in Breast Cancer Patients, Identifying the Barriers Among Women Receiving Breast Cancer Drugs at Hawassa University Comprehensive and Specialized Hospital, Ethiopia
Abstract: Background: Breast cancer remains the most common cancer and most common cause of cancer-related mortality among women worldwide [1]. While incidence rates have historically been higher in the developed world, there has been a recent sharp increase in incidence and mortality in the developing world [2]. Objectives: The main purpose of this study was to assess the barriers resulting in delayed patient presentation to breast cancer care among women receiving …
Published in Research and Reviews : Journal of Computational Biology · Vol. 7, Issue 3, 2018 · pp. 24–31 Read article
-
A Conceptual Review of Qillate Ifraze Darqia (Hypothyroidism) and Its Correlation with Sue Mizaj Barid
Abstract: Qillate Ifraze Darqia (Hypothyroidism) is the most common disease of thyroid gland. Iodine deficiency continues to be a major contributor to hypothyroidism worldwide. The condition is the most common, impacting up to 40/10 000 women and 6/10 000 men annually. In traditional Unani literature, Qillate Ifraze Darqia is not explicitly described. However, ancient Greco– Arab scholars have given ample description of Sue Mizaj Barid and mentioned its Asbab, Alamaat wa …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 10, Issue 1, 2023 · pp. 23–28 Read article
-
Optical Properties of Barium Borate (BaB2O4)Compound for Current Optoelectronic Applications
Abstract: In this work,Barium borate was prepared by sol-gel synthesisdepending on different molar (0.1, 0.2, 0.3 0.4 and 0.5) molar. Barium borate is an inorganic compound, and it was useda borate of barium with a chemical formula BaB2O4 or Ba(BO2)2 It is available as hydrate or dehydrated form, as white powder or colorless crystals. The optical characteristics of the prepared samples have been investigated by UV/Vis spectrophotometer in the wavelength range …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 49–58 Read article
-
In Vivo Hypoglycemic Activity of Aqueous Leaf and Root Extracts of Macaranga Barteri Müll. Arg. (Euphorbiaceae) In Swiss Albino Mice
Abstract: Background: Macaranga barteri Müll. Arg. is a perennial plant in the family Euphorbiaceae and is used in African traditional medicine for the management of several ailments, including diabetes. Although the leaves and stem bark have been studied for various pharmacological activities, little is known about the therapeutic value of the roots. Objective: This study evaluated the in vivo hypoglycemic activity of aqueous leaf and root extracts of M. barteri in …
Published in Research and Reviews : Journal of Veterinary Science and Technology · Vol. 15, Issue 2, 2026 · pp. 60–78 Read article
-
Effect of Varying Particle Size and Content of Barley Husk on the Physical, Mechanical and Diffusional Properties of Poly Vinyl Alcohol/Barley Husk Composite Films
Abstract: Poly vinyl alcohol (PVA)/natural barley husk (NBH) composite films were prepared using solution casting method. The influence of content (5, 10, 15, 20 and 25 wt%) and particle size (89, 152, 251, 354 and 599 µm) of NBH on the physical, mechanical and diffusional properties of composite films were evaluated. Tensile strength and elongation of the composite films decreased by 55.73 and 59.48% and young’s modulus increased by 76.46% with …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 27–35 Read article
-
A STUDY: Validation of Creep Damage Constitutive Equations of Bar 257 Steels at 650°: A Study
Abstract: Validation of creep damage constitutive equations under the future loads, the left over lifetime is predicted to be quite limited. The main objective is to make prediction about the lifetime left because a growing stage of damage is encouraged by the previous history of loading. The ultimate goal is to render a loading spectrum that is complete in nature and predict about the time of keeping the material in the …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 2, 2017 · pp. 39–44 Read article
-
STUDIES ON MECHANICAL, OPTICAL AND BARRIER PROPERTIES OF LOW DENSITY POLY ETHYLENE WITH MICRO CLAY
Abstract: LDPE (Low density Poly ethylene) was melt blended with micro clay (0.5, 1, 3 & 5 wt%) by using a twin screw compounding extruder. Tubular blown film was taken using a tubular blown film extruder. Mechanical, optical and barrier properties were evaluated. The following trend was observed as the micro clay concentration was increased: The tensile strength was increased by 18% in machine direction (M/D) and decreased by 36% in …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 23–31 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
Successful Management of Sue-Mizaj Barid Yabis Aasabi (G.B. Syndrome): A Case Report
Abstract: A 15 years male patient with a diagnosis of G.B. Syndrome was treated as a case of Sue Mizaj Barid Yabis Aasabi in IPD of NIUM hospital, Bangalore. After two months of treatment, patient was 100% relieved in his complains and became near to normal.
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 1, Issue 1-3, 2012 · pp. 143–145 Read article