ZnO
17 articles · search the full text for this term
-
Applications of Nanomaterials in Membrane Separation for Effluent Treatment in the Textile Industry
Abstract: The textile industry makes a significant contribution to economic growth. As the global population continues to increase exponentially, production rates are also on the rise to meet this growing demand. Unfortunately, this surge in production often leads to noncompliance with environmental regulations. While the textile industry supports economic development, it also contributes to serious pollution. Various dyes, such as azo dyes, Congo Red (CR), Crystal Violet, methylene blue, and methyl …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 1–8 Read article
-
Catalytic Degradation of Polymers Using Metal Oxides (Zno, Cuo): A Sustainable Approach
Abstract: The growing accumulation of synthetic polymeric waste, especially plastics, has become one of the most pressing environmental challenges due to their non-biodegradable nature and long-lasting presence in ecosystems. This issue is compounded by the widespread use of plastic materials in various industries, resulting in vast amounts of plastic waste that contribute to environmental pollution, clog waterways, and pose threats to wildlife. As global plastic production continues to rise, the need …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1052–1062 Read article
-
Heat Transfer Performance of ZnO- Ethylene Glycol- Water Nanofluid Using Thermal Lens Technique
Abstract: Nanofluids are engineered fluids used in advanced electronic systems for thermal management. Fluids with dispersed nanoparticles have exhibited remarkable thermal properties. Ethylene glycol (EG) and water mixtures are widely used in many industrial areas. This study investigates the synthesis and heat transfer performance of ZnO-EG, ZnO-water, and ZnO-EG-water nanofluids using a dual-beam thermal lens technique. ZnO is a widely used inorganic, UV-absorbing, multifunctional semiconducting material with applications in various fields …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 440–445 Read article
-
Improved Cooling Effectiveness in Radiators and Heat Exchangers with Nanofluid-Based Technology
Abstract: This study discusses how the process of heat transfer in radiators and heat exchangers can be improved using nanofluids and analysis of computational fluid dynamics. These nanofluids comprise Al₂O₃ and ZnO dispersed in water-based ethylene glycol solutions, and graphene oxide dispersed in water-based solutions, and performance evaluation was done for the range of flow rates 180–420 l/h. And a 3D CAD model was created using the ANSYS Workbench. It was …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 31–62 Read article
-
Influence of Gd Doping in Structural, Morphological and Optical Properties of Zno Nanostructures Synthesised Via Sol-Gel Processes
Abstract: In this study, nanocrystalline Zn1-xGdx (x=0.0 and 0.03) samples were synthesised via the Sol-gel combustion process. An array of analytical techniques was employed to examine the prepared samples to determine their different physical features. For both pristine and Gd-doped samples, the crystal symmetry is hexagonal with the P63mc space group which is verified via the Rietveld refinement analysis of X-ray diffraction (XRD) data. The atoms' bond length Zn-O and bond …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 219–225 Read article
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Experimental Investigation on Thermal Conductivity and Viscosity of Phase Change Material (NaNOᴣ and KNOᴣ) with Different Concentrations of ZnO Polymer Nanofluids for Solar Energy Absorption
Abstract: When evaluating the effectiveness of solar heat absorption methods or solar thermal energy storage systems (TESS), heat transfer fluid is a crucial element. Thermal conductivity and usable heat obtained for any industrial or immediate power plant efficiency are improved by the distinctive refining of Heat Transfer Fluid (HFT). The phase change material used in this study, known as solar salt is a blend of 60% NaNO3 and 40% KNO3. It …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 25–35 Read article
-
Synthesis and Functional Group Analysis of Solution Processed Zinc Oxide Thin Film Grown on Polyethylene Terephthalate
Abstract: Flexible electronics field is growing every day. Existing technology is facing issues like brittleness, toxicity, inadequacy. Fabrication cost increases in processing of such materials. In this work, zinc oxide nanoparticles synthesized by solution processing technique were used to grow 120nm thick thin film (TF) on Polyethylene terephthalate (PET). This method reduces the processing cost and Zinc Oxide (ZnO) is cheaper and abundant in comparison to other semiconductors option. Material was …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 56–66 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Influence of Dielectric and Active layer Thickness on MgZnO Thin Film Transistor Electrical Characteristics
Abstract: From last decades, Thin Film Transistors Technology uses low-k dielectric material as an insulator. Insulator thickness plays an important role in device dimension. The insulating layer also known as the gate oxide separates the gate electrode from the channel region of the transistor. If the insulating layer is too thin, there is a greater chance that electrons can tunnel through the oxide layer, leading to leakage current. To mitigate this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 5, 2023 · pp. 17–26 Read article
-
Advanced nanosized polymer composites with oxides of TiO2 and ZnO (review)
Abstract: Тhis study discusses recent advances in photocatalytic applications of multifunctional oxide nanocomposites with polymers for the treatment of different pollutants from the water. The analysis of literature in the chapters makes it possible to single out the polymers and nanocomposites that are most promising from the point of developing new technologies. It is shown that composite materials containing TiO2 and ZnO after additional studies can be recommended for self-cleaning protective …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 12, Issue 3, 2022 · pp. 35–44 Read article
-
Investigation of Photocatalytic Properties of Microwave Hydrothermal Synthesized ZnO, SnO2 and ZnO/SnO2 Nanocomposites
Abstract: The coupled ZnO-SnO2 photocatalyst system is one of the coupled semiconductor systems which is extensively employed in photocatalytic applications. ZnO, SnO2 and ZnO/SnO2 composite nanoparticles with three different molar ratios were successfully synthesized via a simple, low cost microwave assisted method using zinc nitrate (Zn(NO3)2.6H2O) and stannous chloride (SnCl2.2H2O) as precursors. The ZnO/SnO2 nanoparticles exhibited higher photocatalytic activities compared to pure ZnO, SnO2 nanoparticles and appreciable highest photocatalytic activity, and …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 12, Issue 2, 2022 · pp. 36–46 Read article
-
Studies on Optical and Electrical Properties of Biohybrid Devices
Abstract: We have reported the studies on optical and electrical properties of hybrid devices. The hybrid films were prepared using a layer of natural dye on ZnO thin films. ZnO thin film was fabricated on FTO coated glass substrate using magnetron sputtering. The natural dyes were extracted using aqueous method from basil, pomegranate, and spinach. It is important to control the molecular layers in the formation of hybrid electronic devices. The …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 11, Issue 1, 2021 · pp. 6–15 Read article
-
A Field Effect Transistor Synthesized using Multiple Al-doped ZnO Nanorods
Abstract: The different Al-doped ZnO nanorods and a SiO2 gate insulator has been used to make nanorod field-effect transistors (FETs). The utilization of numerous nanorods gives higher on-current without significant declination in threshold voltage move and subthreshold inclines. It has been recorded that the on-current of the different ZnO nanorod FETs increases around directly with the quantity of nanorods, with on-current flows of roughly 1.8uA for each nanorod and little change …
Published in Research & Reviews : Journal of Physics · Vol. 7, Issue 2, 2018 · pp. 72–79 Read article
-
Evaluation of Test Performed on Suspension by the Use of ZnO as Blending Agent for Measurement of Mechanical Characteristics
Abstract: This paper entails about the analogy performed on the rear unit-spring loaded hydraulic damper. The focus is laid upon the measurement of mechanical properties when the suspension unit is preloaded. Dynamic load test rig is employed for the accurate and precise measurement of values generated during the test. The suspension unit is preloaded with some initial velocity and the corresponding values are being generated. ZnO as a blending agent along …
Published in Trends in Mechanical Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 33–37 Read article
-
Design and Simulation of MEMS-based Piezoelectric Accelerometer
Abstract: In this work, the modelling and design of a Micro Electro Mechanical Systems (MEMS) uniaxial accelerometer has been presented. The design of the sensor includes sensing acceleration in the x-direction only. The device achieves this function using a proof mass suspended through four spring structure. The device dimensions are finalized mathematically and the simulated using Finite Element Analysis. The structure is simulated with and without piezoelectric material ZnO and a …
Published in Recent Trends in Sensor Research & Technology · Vol. 1, Issue 2, 2014 · pp. 16–19 Read article
-
Flower-like ZnO Thin Film Deposited by Chemical Bath Deposition
Abstract: The ZnO flowers were prepared by chemical bath deposition (CBD), low transmittance in the ultraviolet region was observed, the band gap decreases with increase in deposition time. The SEM images of the deposited ZnO revealed that the films are flower-like with well-developed petals. The XRD of the film are crystal with several peaks. Prominent among them are the peaks at 2θ values of around 32.5°, 35.9° and 38.5° corresponding to …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 3, Issue 1, 2013 · pp. 16–21 Read article