adsorption
35 articles · search the full text for this term
-
Activated Carbon-Based Adsorptive Desulphurization of Diesel for Ultra-Low Refractory Sulfur Fuel Production
Abstract: The problem of “Diesel desulphurization” needs no introduction. A successful attempt has been made to develop an adsorptive desulphurization process based on activated carbon materials as low cost, environmentally friendly and selective adsorbents for the highly stiff-necked Sulphur containing refractory molecules, namely, the dialkyl dibenxothiophenes (DADBT), especially, the 4, 6 dimethyl dibenzothiophene (4, 6 DMDBT). Removal of such refractory compounds is a major bottle-neck in the classical refinery operation, namely, …
Published in Emerging Trends in Chemical Engineering · pp. 44–54 Read article
-
Polymer Composite-Supported Jackfruit Peel Adsorbent for Enhanced Copper (II) Removal from Wastewater: Batch Equilibrium and Isotherm Analysis
Abstract: The increasing concern of disposal of copper-containing effluents into the environment has led to heightened interest in designing cost-effective, eco-friendly and scalable adsorbent systems. Traditional metals and synthetically engineered sorbents prove to be effective; however, these systems are energy intensive. Agricultural residues entrapped in polymer composite systems constitute an economically feasible solution to this environmental challenge. This work reports on the design, characterization and performance evaluation of an economical adsorbent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 375–390 Read article
-
Bioscouring And Anionization of Waste Cotton Fabric for Efficient Removal of Malachite Green Dye
Abstract: Adsorption is an efficient method for dye removal but the high cost of adsorbents limits its use, emphasizing the need for sustainable, low-cost alternatives. This study explores the usage of modified cotton fabric for the treatment of malachite green (cationic dye) from wastewater. Cellulase extracted from Raphanus sativus and Daucus carota were evaluated for bioscouring potential which was confirmed by scanning electron microscopy. Further, cotton fabric was chemically modified using …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 53–68 Read article
-
Exploring Gelatin Film an Eco-Friendly Biomaterial: Synthesis, Characterization, and Environmental Applications
Abstract: This study explores the synthesis, characterization, and application of eco-friendly gelatin films, a sustainable and biodegradable biopolymer alternative to synthetic plastics. Synthesized via solution casting and characterized by UV-Vis spectroscopy, FTIR, and TGA, these films demonstrated excellent molecular integrity and thickness-dependent properties, with higher gelatin concentrations leading to thicker films and delayed solubility. The research highlights their significant potential in removing diverse environmental pollutants, including dyes (methylene blue, methyl orange), …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 1–16 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Adsorptive Removal of Rhodamine-B Using Eco- Synthesized Green Tea–Aluminium Nanoparticles
Abstract: This study examines the use of Green Tea–Aluminium Nanoparticles (GT-Al NPs), a unique and eco-friendly adsorbent, to remove the dangerous Rhodamine-B dye from water. For characterisation, SEM, FTIR, TGA, and EDX were employed. We evaluated the effects of pH, temperature, dosage, contact time, and initial dye concentration on adsorption efficiency. First- and second-order pseudo models were used to characterize adsorption kinetics, and the Langmuir model explained equilibrium, as well as …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 3, 2025 · pp. 61–72 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Advances in Water Purification: A Comprehensive Review of Techniques and Technologies
Abstract: Access to safe and clean drinking water is crucial for both environmental sustainability and human health, and water purification is a key component of this. Developments in water purification technologies have emerged as a key area of scientific and technical research due to the growing global water shortage and contamination. From conventional approaches to state-of-the-art technologies, this review article offers a thorough examination of the most current advancements in water …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 2, 2025 · pp. 26–30 Read article
-
Removal of Lead (II) ions from Water by using green nanoTrimanganese Tetroxide
Abstract: Inorganic pollutants like heavy metal ions and organic pollutants like pesticides and dyes are the main causes of water pollution. These contaminants cause serious issues for the environment and public health when they are present. To get rid of these contaminants from water bodies, several methods are employed.Due to its ease of use, great efficiency, abundance of adsorbents, and low sludge creation, adsorption is the most advantageous method for purifying …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 691–700 Read article
-
Nano-Adsorbents for Water Purification: A Focus on Nanoclays
Abstract: Nanotechnology has emerged as a pivotal tool in addressing contemporary environmental challenges, particularly in water purification. This paper explores the use of nano-adsorbents, focusing on nano-clay materials, as effective solutions for the adsorption and removal of harmful pollutants from water. Nano-clays, owing to their large surface area and unique physicochemical properties, exhibit exceptional adsorption capacity for contaminants such as heavy metals, dyes, antibiotics, and various organic compounds. This review consolidates …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 3, 2024 · pp. 38–44 Read article
-
Orange Peels as Biosorbent for Heavy Metals and Its Application in Water Pollution Remediation Studies
Abstract: Ecosystems and public health are seriously threatened by heavy metal poisoning of water sources, which is growing. Heavy metal removal from wastewater using conventional technologies is either costly, ineffective, or results in secondary pollutants. In this regard, biosorption has become an affordable and environmentally beneficial substitute. The mitigation study of heavy metals from wastewater is crucial for the protection of the environment and human health. Efforts have been made to …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 14, Issue 3, 2024 · pp. 7–14 Read article
-
Evaluation of AGO Adsorption Rate Isotherms Using Adsorbent Formulation of Plantain Agbagba1 and Clay of Different Mix Ratio in Pollutant Remediation in Salt Water
Abstract: The application of some agro-based materials in combination with day soil, for the production of adsorbents were investigated in relationship to their performance in AGO (Diesel) treatment in a batch process unit. The research allows the model concept of Langmuir isotherm, Frundlich isotherm and Temkin Isotherm for the determination of the adsorption rate of the various isotherms with respect to the effect of the particle size and the mixed ratios …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 31–42 Read article
-
A Parametric Study of Methylene Blue Adsorption Using Low-cost Adsorbent
Abstract: This research focused on the adsorptive capacity of activated carbonaceous substance made from the peel of Spanish cherries to remove methylene blue dye from wastewater. Through batch adsorption tests, the impact of several variables on the percentage of dye removal was examined. These variables included adsorbent preparation temperature, adsorbent dosages, initial concentration of dye solution, process time, pH of dye solution, and operation temperature. It was found that using 1 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 3, 2023 · pp. 10–16 Read article
-
Effect of Temperature on Inhibitory Efficacy of Tamarindus indica fruit extract on acid corrosion of Aluminium
Abstract: An attempt has been made to investigate the anti-corrosive propensity of ethanolic extract of Tamarindus indica fruit at elevated temperature between 303 to 343 K, so as to replace the exploitation of toxic chemicals as corrosion inhibitors. Inhibition efficiency has been observed significantly high (84.06%) at room temperature at concentration 0.45 %. The inhibition efficiency is found to increase with increasing concentration of extract and decrease with rise in temperature. …
Published in Recent Trends in Fluid Mechanics · Vol. 10, Issue 3, 2023 · pp. 42–50 Read article
-
Evaluation of the Concentration of Selected Physicochemical Properties and the Effect of Temperature of Packed Bed Units Treated Using Bio-adsorbents
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 25–37 Read article
-
Green synthesis of Ag-Fe2O3-CuO-PANI nanocomposite and its application as an Apple Vinegar sensor
Abstract: Green synthesis of nanoparticles is inexpensive and environmentally safe, herein we report green approach for the synthesis of Ag, Fe2O3, CuO nanoparticles by using Asparagus Racemosus plant to detect carboxylate vapours. Synthesized Ag, Fe2O3, CuO nanoparticles were taken in 1:1:1 ratio and PANI (polyaniline) was added in ratio 5:1 to form Ag-Fe2O3-CuO–PANI nanocomposite. Synthesized Ag-Fe2O3-CuO-PANI were characterized by XRD, FESEM and FTIR whose size was in the range of 16–60 …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 41–53 Read article
-
Colour Removal from Effluents Using Micromaterials
Abstract: In this study, the ability of Micromaterials to adsorb color from an aqueous solution was investigated by using flocculants and activated carbon prepared from Rice Bran, an agricultural by-product, and batch mode adsorption experiments were conducted. The influence of various factors such as initial concentration (20, 40, 60, 80 mg/L), contact time, pH (4.0-9.0), and dosage on the adsorption capacity was investigated and optimal experimental conditions were ascertained. Adsorption data …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 2, Issue 1-3, 2012 · pp. 1–8 Read article
-
Adsorption of Congo Red Dye in Aqueous Solution using Moringa oleifera Seed Powder
Abstract: The feasibility of using Moringa oleifera seed for the Congo red adsorption from aqueous solution has been investigated as a low cost and an eco-friendly adsorbent. Adsorption studies were conducted on a batch process, to study the effects of contact time, initial dye concentration and adsorbent dosage. Maximum colour removal was observed at higher adsorbent dosage. The present dye removal decreased from 95% to 81% as the dye concentration has …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 1, 2021 · pp. 8–18 Read article
-
Synthesis and Characterization of Bamboo-Supported Nano Zerovalent Iron (NZVI-AB) for Cr(VI) Sequestration
Abstract: Remediation of chromium contaminated sites present both technological and economic challenges, as conventional methods are often too expensive and difficult to operate. In this study, bamboo supported Zero-valent iron (Fe0) nanoparticles were synthesized, characterized, and were tested for removal of Cr(VI). Fe0 nanoparticles were synthesized by the reduction of ferric chloride with avocado polyphenols and characterized by FTIR (Fourier transform infrared) spectroscopy and XRD (X-ray diffraction). Batch experiments were performed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 1–7 Read article
-
Synthesis and Characterization of Green Synthesized Iron Nano Particle (GInP) Using Eucalyptus globulus for Lead Removal
Abstract: The application of green synthesized iron nanoparticle for the removal of lead is researched in this study. The FT-IR and XRD results reveal that a nanoparticle with 80 nm size could be synthesized using Eucalyptus globulus leaf extract. The specific surface area of the nanoparticle was found to be 59 m2/g. The lead removal capability of the green synthesized iron nanoparticle (GInP) was investigated for lead concentration ranging from 50–250 …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 20–25 Read article