adsorption
35 articles · search the full text for this term
-
Isotherm and Kinetic Studies of Methylene Blue Dye Adsorption Using Sulfuric Acid Activated Nigerian Montmorillonite Clay
Abstract: The Presence of methylene blue and other basic dyes in water causes various harmful effects for both human and aquatic species. In this study, montmorillonite clay in its raw and acid (0.5M H2SO4) activated states were investigated for the sorption of methylene blue dye. The structural changes due to acid treatment were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The studied parameters that affect adsorption efficiency were …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 2, 2020 · pp. 37–47 Read article
-
Adsorption of Congo Red Dye by Using Poly(2-Chloroaniline-co-2-Methoxyaniline)
Abstract: ABSTRACTThe removal of this dye from the industry waste water is environmentally significant. In the present work the adsorbent, poly(2-chloroaniline-co-2-methoxyaniline) was employed to remove congo red dye from water. Batch experiments were conducted to study the effects of parameters such as concentration, contact time, amount of the adsorbent dose and pH. The result showed that the dye was removed when pH = 7.5-8 and contact time is 60 minutes and …
Published in Journal of Water Pollution & Purification Research · Vol. 6, Issue 3, 2019 · pp. 9–18 Read article
-
Steel corrosion about application of inhibitors
Abstract: In chronology of prevention of irreversible degradation of metals, inhibitors to corrosion have studied to inhibit use of toxic inhibitors. Prevention of toxic inhibitors has further studied to explore non-toxic inhibitors prepared from biological origins, e.g. plant originated or underwater organisms or expired drugs. Toxic organic inhibitors are further studied to select those in which toxicity is removed by dilution of processing chemical. If water pipelines are considered use of …
Published in Journal of Water Pollution & Purification Research · Vol. 6, Issue 2, 2019 · pp. 47–57 Read article
-
Corrosion inhibitors of steel applicable by green but toxics
Abstract: Inhibitors in detergent and alkali based chemicals are used in various media for steels. Toxicity has induced pharmaceutical compounds as better inhibitors to restrict pollutant gases emissions after reaction with alkaline inhibitors. Green in origin inhibitors are toxin free to use with detergents for inhibition of both pollutant gases and corrosion of processing machineries made of metals. Eco-friendly inhibitors have appeared for steel corrosion being embedded in concrete i.e. alkaline …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 2, 2019 · pp. 38–47 Read article
-
5000 Series of Aluminum and Its Alloys Opaque by Inhibitors
Abstract: 5XXX series of alloys are prepared for marine applications. Light weight, strength, low maintenance and inherent tendency to form passivity surfacing have selected these alloys for manufacture of cargo ships. Anti corrosive paints have been traditional protections in these alloys. Workers exposed to chromate residues during sanding of aircraft and recoating have increased risk of cancer to 250,000-fold higher. These paints are hazardous for aquatic life, so eco-friendly corrosion inhibitors …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 2, 2019 · pp. 1–8 Read article
-
Steel inhibitors of gas well steels
Abstract: Corrosion inhibitor is chemical compound or substance that, when added in small concentration to an environment, effectively decreases the corrosion rate. Multiphase oil and gas well flowlines at subsea has studied to corrode by contamination of CO2 gas at different temperature, partial pressure, velocity of flow and properties of scale formed at inner wall. Irrecoverable localized corrosions cause failure of structures those are beyond effects of corrosion inhibitors. Pollution of …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 23–33 Read article
-
Removal and Recovery of Zn (II) from Electroplating Rinse Waters Using Cation-Exchange Resins in a Packed Column
Abstract: In the present study, adsorption of Zn (II) ion from rinse water of electroplating Zinc has been attempted by Indion 225 and Dueolite C20 cation exchange resins through batch and column mode. Based on isotherm analysis more efficient adsorbent is chosen for column mode adsorption studies. Indion 225 and Dueolite C20 cation exchange resins showed a remarkable increase in sorption capacity as 49.3mg/g and 13.9mg/g for Zn (II) ions respectively …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 2, 2014 · pp. 35–46 Read article
-
Adsorption Isotherm Study for Activated Carbon Produced from Cassava Peel
Abstract: Adsorption isotherm study of Activated Carbon produced from cassava peel was carried out using phenol solution as the adsorbate. Langmuir and Freundlich isotherm models were employed for the study. Varying ratios of 1:1, 0.75:1, 0.5:1, and 0.25:1 activating agent to cassava peel were used for the formulation of the Activated Carbon. The Freundlich R2 value for the 1:1, 0.75:1, 0.5:1, and 0.25:1 formulations was 0.822, 0.979, 0.971 and 0.974, respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 8–12 Read article
-
Arsenic Removal by Using Low Cost Non-conventional (NLP, PLP, ALP) Adsorbents
Abstract: AbstractIn present study, Azadirachta indica (neem leaves), Ficus religiosa (peepal leaves), Emblica officinalis (amla leaves) used as adsorbent. Batch experiments were conducted to study the adsorption behaviour. The material was characterized by FTIR, XRD, TGA-DTA, and SEM-EDS. The extent of arsenic removal capacity was tested by the material by varying the solution parameters like adsorbent dose, adsorbate concentration and pH of the solution, contact time and temperature. The amount of …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 9, Issue 3, 2018 · pp. 29–39 Read article
-
Mathematical Study and Steady-State Modeling of Simple Vapour Adsorption Refrigeration System
Abstract: Abstract This paper discusses the mathematical formulation for various heats involved during different processes of a simple vapour adsorption refrigeration cycle having activated carbon and methanol as the active working pairs. This formulation is further used and a detailed analysis of the cycle’s performance is studied based on a steady-state model prepared on the FORTRAN77 platform compiler. The analysis includes effects of the input parameters of the cycle such as …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 3, Issue 3, 2016 · pp. 1–13 Read article
-
Adsorption Isotherms for the Removal of Heavy Metals from Aqueous Solution Using Groundnut Shell and Rice Husk
Abstract: Heavy metals are considered as hazardous to the environment due to their toxicity even at low concentration. Batch experiments were conducted to know the potentiality of agricultural byproducts (Groundnut shell, Rice husk and combined adsorbents) on removal of heavy metal ions. It has been found that the percentage of adsorption increases with increase in pH and decreases with the increase in metal ions concentration. The obtained results showed that the …
Published in Journal of Water Pollution & Purification Research · Vol. 1, Issue 3, 2014 · pp. 1–12 Read article
-
Removal of Heavy Metals using Combination of Adsorbents - A Case Study using Industrial Waste Water
Abstract: Heavy metals are widely used in numerous industries such as paints and pigments, glass production, mining operation, electroplating, battery manufacturing and textile industries. The significant losses of heavy metals occur during the manufacturing processes and these lost heavy metals are discharged in the effluent. As they move from one ecological trophic level to another, metallic species start damaging the ecosystem. They also become difficult to track as they move up …
Published in Journal of Water Pollution & Purification Research · Vol. 1, Issue 2, 2014 · pp. 28–35 Read article
-
A Review on Conventional and Alternative Methods for Defluoridation of Water
Abstract: Occurrence of fluoride in groundwater is due to anthropogenic influences on its natural formation and geological settings. Consuming fluoride has both beneficial and detrimental effects on dental and bone structures. This review article is aimed at facilitating precise information on the various methods applied to remove fluoride from water. The defluoridation techniques are divided into coprecipitation, adsorption ion exchange, contact precipitation, electro-coagulation and membrane process. The mechanism involved in each …
Published in Journal of Water Pollution & Purification Research · Vol. 1, Issue 2, 2014 · pp. 1–12 Read article
-
Separation Trends of Waste Metal Working Fluid from Aqueous Media
Abstract: This paper envisages compiling the scattered available information about the treatment technologies and simple sorption procedures for the removal of waste metal working fluids (MWFs) from machining waste water. Some advantages of sorption technique through agro-waste materials over conventional treatment technologies for the MWFs removal are also the focusing objectives of this paper. Sorbents usually contains various active groups; they are robust and can be the better part of filtration …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 3, Issue 2, 2013 · pp. 45–56 Read article
-
Calcareous Soil as a Promising Adsorbent to Remove Fluoride from Aqueous Solution: Equilibrium, Kinetic and Thermodynamic Study
Abstract: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In this work, the feasibility of employing calcareous soil to remove fluoride ions from its aqueous solutions was investigated under batch mode. The influence of solution pH, sorbent dose, initial fluoride concentration, contact time, stirring rate and temperature on the removal process were investigated. The equilibrium adsorption data were analyzed using Langmuir, Freundlich and Temkin isotherm models. The kinetics of fluoride …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 3, Issue 3, 2012 · pp. 1–21 Read article