Search
128 articles for “working liquid”
-
Report on Microfluidic Flow of Dyed Working Liquids inside the Polymeric Devices
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is engineered by the maskless lithography and indirect bonding technique. Also, total nine individual polymethylmethacrylate (PMMA) based microfluidic devices are fabricated by maskless lithography, hot embossing lithography, and direct bonding technique. Dyed ethylene glycol, dyed ethanol, and dyed aqueous isopropyl alcohol (50% water, 50% IPA) are prepared and used as working liquids to record each surface-driven microfluidic flow. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 22–29 Read article
-
Chemical Processing of SU-8 Photoresist to Record the Surface-Driven Microfluidic Flow of Dyed Working Liquid in the Regime of Fluid Mechanics
Abstract: Chemical processing of negative photoresist SU-8 is performed to fabricate a set of three individualSU-8 based glass microfluidic devices inside the cleanroom laboratory. The major steps of SU-8processing are spin coating using a spin coater, soft baking, ultra-violet (UV) exposure, post exposurebaking, development by SU-8 developer, and hard baking. The indirect bonding for leakage-freesealing is used during hard baking to fabricate the microfluidic devices. Author has prepared thedyed water to …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 1, 2021 · pp. 53–57 Read article
-
Recording on Passive Capillary Flow of Dyed Working Liquids in the Polymer based Microfluidic Devices Fabricated inside the Cleanroom Laboratory
Abstract: In this experimental work, author has fabricated total 13 individual microfluidic devices using the maskless lithography, hot embossing lithography, direct bonding technique, diamond like carbon (DLC) coating, and laboratory-made clamping inside the cleanroom laboratory using author’s own hands-on completely. Polymethylmethacrylate (PMMA) is the chosen polymer to fabricate the 10 individual microfluidic devices due to its plasticity and optical transparency. Dyed water, dyed ethylene glycol and dyed ethanol are the prepared …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 3, 2020 · pp. 35–44 Read article
-
Experimental Studies on the Passive Capillary Flow of Non-aqueous Working Liquids in PMMA Microfluidic Devices of Rectangular Cross-Sections
Abstract: The polymethylmethacrylate (PMMA) microfluidic devices are fabricated by the maskless lithography, hot embossing lithography and direct bonding technique. The effects of liquid viscosity, surface wettability and channel aspect ratio on the surface-driven capillary flow of non-aqueous working liquids are studied in the fabricated PMMA microfluidic devices. The working liquids are ethylene glycol, isopropyl alcohol (IPA) and ethanol. These experimental studies will be useful to manipulate different non-aqueous working liquids inside …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 29–33 Read article
-
Passive Capillary Flow of Aqueous Working Liquids in the PMMA Microfluidic Devices and SU-8 based Glass Microfluidic Devices
Abstract: Abstract: In this work, total 9 individual polymeric microfluidic devices are fabricated. The passive capillary flows of aqueous working liquids are studied in the fabricated polymethylmethacrylate (PMMA) microfluidic devices and SU-8 based glass microfluidic devices. All the microfluidic devices are fabricated inside the cleanroom laboratory. Dyed aqueous ethanol and dyed aqueous isopropyl alcohol (IPA) are the selected working liquids. CMOS camera is used to record each passive capillary flow in …
Published in Recent Trends in Fluid Mechanics · Vol. 6, Issue 1, 2019 · pp. 23–28 Read article
-
Recording of the Surface-Driven Microfluidic Flow of Aqueous Working Liquids in PMMA Microfluidic Devices
Abstract: In this work, the pristine polymethylmethacrylate (PMMA) microchannel surfaces are modified by the air dielectric barrier discharge (DBD) plasma processing, nitrogen plasma treatment, Undoped diamond-like carbon (DLC) coating, and Si-doped DLC coating, to produce the PMMA microfluidic devices having inner walls of different surface wettability. Dyed water and dyed aqueous ethanol (90% dyed water, 10% ethanol) are the selected two aqueous working liquids. The video recording of each surface-driven microfluidic …
Published in Emerging Trends in Chemical Engineering · Vol. 5, Issue 3, 2018 · pp. 24–31 Read article
-
Passive Capillary Flow of Aqueous Working Liquids in the PMMA Microchannel Bends
Abstract: In this work, passive capillary flows or surface-driven capillary flows are recorded in polymethylmethacrylate (PMMA) microfluidic devices using aqueous ethanol and aqueous isopropyl alcohol (IPA) as chosen aqueous working liquids. Microchannel bends are the chosen microfluidic devices with the selected microchannel widths of 50, 120 and 200 micron. This work will be useful to fabricate the PMMA laboratory-on-a-chip systems for bioengineering applications.
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 1, 2018 · pp. 21–24 Read article
-
Passive Capillary Flow of Aqueous Working Liquids in the Straight PMMA Microchannels of Rectangular Cross- sections
Abstract: In this report, polymethylmethacrylate (PMMA) is used to fabricate the straight microchannels of uniform channel widths having rectangular cross-sections. Maskless lithography, hot embossing lithography and direct bonding are the chosen techniques to fabrication the straight PMMA microchannels. Aqueous ethanol and aqueous isopropyl alcohol (IPA) are the prepared aqueous working liquids to study the passive capillary flow characteristics. Total 8 individual straight PMMA microchannels are fabricated in this work. This work …
Published in Journal of Petroleum Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 5–8 Read article
-
Surface-Driven Capillary Flow of Aqueous Microparticle Suspensions as Working Liquids in the PMMA Microfluidic Devices
Abstract: AbstractPolymethylmethacrylate (PMMA) microfluidic devices have been fabricated by the maskless lithography, hot embossing lithography, drilling and direct bonding technique. The influence of effective viscosity on the speed of surface-driven capillary flow of aqueous microparticle suspensions has been studied. The surface-driven capillary flow of any particular aqueous microparticle suspension is faster in the microchannel of larger channel aspect ratio. Also, the surface-driven suspension flow is faster on the surface of higher …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 1, 2017 · pp. 18–21 Read article
-
Passive Capillary Flow of Aqueous Working Liquids in the SU-8 based Microchannel Bends
Abstract: In this work, total 4 individual SU-8 based microchannel bends are fabricated by maskless lithography and indirect bonding technique. The leakage-free surface-driven capillary flow of aqueous ethanol is recorded by a CMOS camera. Also, the leakage-free surface-driven capillary flow of aqueous isopropyl alcohol (IPA) is recorded by the CMOS camera. This work will be useful in bioengineering applications.
Published in Emerging Trends in Chemical Engineering · Vol. 5, Issue 1, 2018 · pp. 20–22 Read article
-
Experimental Investigations on the Durability of PMMA Microfluidic Devices Fabricated by Hot Embossing Lithography with Plasma Processing for Bioengineering Applications
Abstract: In this research paper, total 1290 individual static contact angles of different working liquids have been measured and recorded on the flat polymethylmethacrylate (PMMA) surfaces. Total 474 individual PMMA microfluidic devices have been fabricated by the maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory and mechanical engineering workshop to determine the durability of these microfluidic devices. Total nine individual working liquids have been used to …
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 3, 2016 · pp. 1–18 Read article
-
Short Review on the Effects of Plasma Processing Techniques in PMMA Microfluidic Device
Abstract: Abstract: The plasma processing techniques are useful for surface modifications on polymer surfaces. The appropriate surface modification alters the level of static contact angles on the polymer surfaces. The surface-driven microfluidic flow of suitable working liquid is sensitive to the static contact angle of microchannel surfaces fabricated by different polymers. Therefore, plasma processing techniques are suitable to vary the flow speed of working liquids in microfluidics. In future, this review …
Published in Recent Trends in Fluid Mechanics · Vol. 6, Issue 1, 2019 · pp. 20–22 Read article
-
Semiconductor Physics and Micron Scale Fluid Mechanics towards the Microelectromechanical Systems Associated with Nanotechnology
Abstract: Interrelations among semiconductor physics, microfluidics, nanofluidics and nanotechnology are briefly described. A single microchannel bend is designed and fabricated by author using the maskless lithography, hot embossing lithography and direct bonding. Dyed water is the selected and prepared working liquid in this work. Surface-driven (passive) capillary flow of working liquid is recorded in the fabricated microchannel bend using a CMOS camera. This work may be useful in applied chemistry.
Published in Research & Reviews : Journal of Physics Read article
-
Microfluidic Flow of the Dyed Aqueous Isopropyl Alcohol in a single SU-8 based Glass Microfluidic Device Fabricated inside the Cleanroom Laboratory
Abstract: A single SU-8 based glass microfluidic device is fabricated by maskless lithography and indirect bonding technique, using author’s own hands-on completely inside the cleanroom laboratory. Dyed aqueous isopropyl alcohol (90% dyed water, 10% isopropyl alcohol) is the prepared working liquid in this work. The surface-driven microfluidic flow of working liquid is recorded by a CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second. The …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 1, 2019 · pp. 10–13 Read article
-
Short Experimental Report on Lithographic Technique in Microfluidics
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is fabricated by the maskless lithography and indirect bonding technique. The sealing by indirect bonding technique is perform during the hard baking in maskless lithography. Dyed ethylene glycol is prepared as the working liquid. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven microfluidic flow of …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 3, 2021 · pp. 1–5 Read article
-
Surface-Driven Capillary Flow on Microchannel Surface Coated with Diamond like Carbon of Nano-scale Thickness towards the Applications in Statistical Features of Fluid Mechanics
Abstract: In this experimental work, polymethylmethacrylate (PMMA) is the chosen polymer as device material to fabricate the microfluidic devices. PMMA is optically transparent polymer which is a facility to record the microfluidic flow of any dyed working liquid inside the fabricated microchannels. Two individual microfluidic devices are fabricated by lithographic techniques. Dyed water is selected and prepared as working liquid. Leakage-free surface-driven capillary flow of dyed water is recorded corresponding to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 8–12 Read article
-
Optical Recording of Surface-Driven Capillary Flow in Straight PMMA Microchannels
Abstract: AbstractIn this experimental work, a total of six individual straight microchannels are fabricated using maskless lithography, hot embossing lithography and direct bonding technique. Polymethylmethacrylate (PMMA) is the selected transparent polymer to fabricate these microchannels facilitating the optical recording of the surface-driven capillary flow of dyed water (working liquid) using a CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second. Dyed water as dyed working …
Published in Trends in Opto-electro & Optical Communication · Vol. 10, Issue 1, 2020 · pp. 24–30 Read article
-
Short Report to Describe the Surface-driven Microfluidic Flow in Fluid Mechanics
Abstract: In this short report, a brief review on surface-driven microfluidic flow is provided. Also, the maskless lithography and indirect bonding technique are used to fabricate a single SU-8 based glass microfluidic device. Dyed ethylene glycol is prepared as working liquid to test the fabricated device. The surface-driven microfluidic flow of dyed ethylene glycol is recorded by a CMOS camera catching 25 frames per second with a corresponding time-scale resolution of …
Published in Recent Trends in Fluid Mechanics Read article
-
Surface-Driven Microfluidic Flow in Fluid Mechanics
Abstract: In this short report, a brief review on surface-driven microfluidic flow is provided. Also, the maskless lithography and indirect bonding technique are used to fabricate a single SU-8 based glass microfluidic device. Dyed ethylene glycol is prepared as working liquid to test the fabricated device. The surface-driven microfluidic flow of dyed ethylene glycol is recorded by a CMOS camera catching 25 frames per second with a corresponding time-scale resolution of …
Published in Recent Trends in Fluid Mechanics · Vol. 8, Issue 3, 2021 · pp. 1–5 Read article
-
Effect of PMMA Micropillars on the Surface-Driven Capillary Flow of Dyed Aqueous Isopropyl Alcohol in PMMA Microfluidic Devices
Abstract: In this work, dyed aqueous isopropyl alcohol [60% isopropyl alcohol (IPA), 40% dyed water] is prepared as the working liquid. The effect of surface modification on the microfluidic flow of aqueous isopropyl alcohol (IPA) is studied in the polymethylmethacrylate (PMMA) microfluidic devices. The effect of surface area to volume ratio on microfluidic flow of aqueous isopropyl alcohol is also studied. The effect of microfluidic friction on microfluidic flow of aqueous …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 44–47 Read article