Search
37 articles for “tribological performance”
-
Tribological Performance and Wear Coefficient Prediction of AA2024–TiC Composites via Python-Based Machine Learning
Abstract: Determining wear coefficient accurately serves as a critical factor to maximize engineering materials' tribological characteristics. The experiment examines the wear characteristics of TiC-reinforced AA2024 aluminum alloy subjected to different tribological operating conditions. A pin-on-disc tribometer performed wear tests under different conditions of load and TiC weight fraction and sliding speed and duration. ANOVA statistical results show that load intensity and TiC reinforcement density stand out as principal variables that affect …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1099–1112 Read article
-
Fabrication and Assessment of Tribological Performance of Nickel-Graphene-MXene Hybrid Nano-composites
Abstract: As industries such as aerospace, automotive, defence, and electronics demand materials with superior wear resistance, high strength, and thermal stability, traditional metals are reaching their performance limits. Hybrid nanocomposites offer a pathway to meet these stringent requirements. In this study, novel Nickel-Graphene-MXene hybrid nanocomposites were fabricated using a powder metallurgy route, incorporating varying weight percentages (up to 2 wt.%) of MXene and 1 wt.% graphene nanosheets into a nickel matrix …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 780–798 Read article
-
A Critical Analysis of Cold Spray Coatings and its Tribological Performances
Abstract: Coatings are utilized for temperature barrier, protection against corrosion and wear etc. Cold spray is a solid-state processing method that is unique among thermal deposition procedures since it deposits particles at temperatures below their melting point. This technology does not involve particle melting, hence retaining the original properties of the materials. Increased coating strength is achieved by retaining of feedstock powder microstructures and characteristics, which prevents oxide formation and other …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 220–226 Read article
-
Enhanced Mechanical and Tribological Performance of Magnesium–Boron Carbide Composites Fabricated via Stir Casting for Lightweight Structural Applications
Abstract: This study investigates the fabrication and evaluation of properties of magnesium (Mg) matrix composites reinforced with boron carbide (B₄C) for lightweight structural applications. Stir casting was employed to incorporate B₄C particles at varying weight fractions (0%, 3%, 6%, and 9%) into the magnesium matrix. The influence of B₄C on density, porosity, hardness, tensile strength, and wear resistance was systematically examined. Theoretical density increased from 1.74 g/cm³ (pure Mg) to 1.88 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 29–39 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Effectiveness of PTFE-Based Nano-coatings in Improving Corrosion and Wear Resistance of Stainless Steel
Abstract: Polytetrafluoroethylene (PTFE) has emerged as a highly effective material for enhancing the durability and performance of metal surfaces, particularly in environments requiring superior corrosion resistance and low friction. This study investigates the application of PTFE coatings on various metallic substrates, with a focus on stainless steel and carbon steel, to improve their corrosion resistance, wear protection, and tribological performance. Utilizing advanced deposition techniques such as sol-gel and plasma spray, PTFE …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 32–38 Read article
-
Experimental Investigation of Micro-Hardness & Tribological Behavior of Composite Coating for Wear Resistance Application
Abstract: The author effectively created a composite coating with enhanced durability utilizing the HVOF technique in this investigation. The automobile business has encountered fierce worldwide rivalry, rapid technical breakthroughs, and strict regulatory regulations in recent year.. Producers of lubricants, gasoline additives, and worldwide original equipment manufacturers (OEMs) are striving to address the difficulties presented by changing consumer preferences and emerging energy conservation and environmental protection regulations. We have successfully created and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1097–1103 Read article
-
Experimental Analysis of Residual Stress, Micro-Hardness and Corrosion Behavior of HVOF Sprayed Composite Coating
Abstract: The utilisation of non-traditional composite coating materials, enhanced lubrication, and surface geometry optimisation have all contributed to the tribological performance. Piston rings are among the most crucial engine parts since friction causes between 40 and 45 percent of all energy loss. Fuel efficiency, power loss, and exhaust pollutants are all strongly impacted by the piston assembly's tribological performance. The present study's primary goal was to develop composite coating by using …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 77–82 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
A Review on Predicting Wear and Friction of PTFE Composites - Fillers to Machine Learning Models
Abstract: Polytetrafluoroethylene (PTFE) composites, a self-lubricating material with low friction, became an indispensable material in engineering applications where load carrying capacity and wear are crucial. The pure PTFE has poor mechanical strength and wear resistance which can be enhanced by the addition of fillers in appropriate volume fraction. The wear performance is dependent on various factors such as fillers, operating parameters, environmental conditions as well as manufacturing attributes. This makes the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 114–128 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Process Parameters Optimization of Fiber Laser Cladded SS316 Surface Using RSM Analysis
Abstract: This paper presents the laser cladding experiments on the surface of SS316 to study the variations in process parameters, such as scanning speed (100-250 mm/min), laser power (50-250 W), and % volume of B4C (5- 25%) + SS316 powder on the mechanical, metallurgical and tribological performance of the modified surface. A central composite design (CCD) was used to develop the response surface methodology (RSM) to design the experiments and for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 186–201 Read article
-
Red Mud Particles' Impact on the Mechanical Properties and Microstructure of AA6005 Composites for Brake Rotor Applications
Abstract: There is increasing focus on utilizing industrial waste as reinforcement in metal matrix composites, driven by the demand for eco-friendly and cost-effective materials in automotive applications. With an emphasis on their possible use in braking rotors, this study examines how red mud particles affect the microstructure and mechanical characteristics of AA6005 aluminum alloy composites. Red mud, a byproduct of the Bayer process, is a good low-cost ceramic reinforcement because it …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 573–581 Read article
-
Comprehensive Study on the Mechanical And Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement technique. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Recent Progress in Magnesium Hybrid Metal Matrix Composites: Processing, Properties, and Applications
Abstract: Magnesium hybrid composites have emerged as promising materials to meet the growing demands of advanced sectors such as biomedical, aerospace, defense, automotive, electronics, and marine industries. However, the inherent drawbacks of magnesium, specifically low wear resistance, have encouraged scientists to develop magnesium-based MMC with improved mechanical properties and thermal properties. To achieve this, various mixtures of reinforcement are employed. These include ceramics with high strength and wear resistance; solid lubricants …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1287–1301 Read article
-
Tribological Characteristics of Dental Crowns
Abstract: Dental tribology is an emerging field that focuses on improving the design and material choices for artificial dental systems. This paper looks at different dental crown materials, their clinical efficacy and the consequences of tribological wear on teeth due to interfacial movement. Ceramics are commonly utilized in fixed dental restorations because of their superior mechanical and cosmetic qualities, which include exceptional fracture resistance and clinical endurance. Ceramic crowns, often used …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 550–559 Read article
-
Integrating AI and ML in Tribology: A Review of Current Trends and Future Prospects
Abstract: This review paper explores the growing integration of artificial intelligence (AI) and machine learning (ML) within the field of tribology. Tribology, the study of friction, wear, and lubrication, is crucial for Improving the performance and longevity of mechanical systems. This review explores the role of AI and machine learning techniques, including artificial neural networks (ANNs), support vector machines (SVMs), and physics-informed machine learning (PIML)can be used to solve difficult tribological …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 3, 2025 · pp. 56–60 Read article