Search
15 articles for “titanium dioxide (TiO2)”
-
TiO₂ Nanostructured Material-based Gas Sensor for Detecting Oxygen and LPG Gases
Abstract: This Paper investigates the use of TiO2 nanowires and nanotetrapods on glass and silicon substrates for sensing combustible gases such as LPG (Liquid Petroleum Gas) and Oxygen. The growth of Titanium dioxide (TiO2) nanowires/nanorods/nanotetrapods was investigated using both physical and chemical methods. In thermal evaporation method, both with and without vacuum conditions, was employed to synthesize various TiO2 nanostructures. A vacuum coating machine was utilized to create uniform TiO2 thin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 443–451 Read article
-
Experimental Investigation on Nitrogen Oxides Air Pollutant Reduction Characteristics of Cement Mortar Using Sustainable Photocatalytic Material
Abstract: Emissions of nitrogen oxide (NOx) should be diminished to address the facts of urban air pollution and its health and environmental consequences. This study explores the potential of NOx reduction of photovoltaic pollutants in cement mortar using titanium dioxide (TiO2) as a photovoltaic material. NOx is one of the major pollutants of urban air, related to the problems of smog and acid rain, with serious health hazards. The study focuses …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 · pp. 26–40 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Development of Novel Materials with Photocatalytic Effect
Abstract: For capturing solar energy and for converting it into electric power, it is utmost essential to design materials that can be used for this purpose. Generally, the materials deployed for converting solar energy into electric energy are sensitive to UV-radiation. If the material used for this purpose are sensitive to visible light, it will be the breakthrough research. It has been a challenge to design materials with novelty of being …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 2, 2023 · pp. 25–39 Read article
-
Low density polyurethane based antistatic coating for PU flexible foam for launch vehicles
Abstract: Polyurethane (PU) is a multi functional polymer prepared by using more than two types of monomers. The unique properties of PU come from monomers, thus broadening the applicability of PU in many different sectors. Furthermore, the antistatic property of PU coatings can be improved by the addition of conductive fillers into matrix thus broadening its application in the manufacture of electronic products, aerospace systems and daily necessities and so on. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 25–30 Read article
-
Preparing Chitosan Hybrid Nanocomposites by Novel Additives for Wound Healing
Abstract: Biomaterials made from chitosan have been discovered to be particularly unique marine polysaccharides (or polycarbohydrates) with a wide range of physico-chemical and biological characteristics suitable for biomedicine field. Due to net positive charge of chitosan, it is essentially capable of chemically binding with negatively charged surfaces A biodegradable blend of chitosan nanoparticles (CHT), poly vinyl alcohol (PVA) and polyethylene glycol (PEG) hybridized with metal oxides nanopowders were prepared and used …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 9–23 Read article
-
Effect of Nano-Additives on the Emissions, Performance, and Combustion Characteristics of Syzygium cumini (Jamun) Biodiesel Powered DI Engine
Abstract: Renewable and cleaner diesel engine fuel has received a lot of attention recently as a result of the depletion of fossil resources. To address this issue, biodiesel can be a potential substitute for diesel fuel. The finest B20 Jamun blends were combined with three different types of nanoadditives to create Syzygium cumini (Jamun) biodiesel, which was tested in a naturally aspirated diesel engine. Global researchers are starting to develop new …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 77–82 Read article
-
Effectiveness of PTFE-Based Nano-coatings in Improving Corrosion and Wear Resistance of Stainless Steel
Abstract: Polytetrafluoroethylene (PTFE) has emerged as a highly effective material for enhancing the durability and performance of metal surfaces, particularly in environments requiring superior corrosion resistance and low friction. This study investigates the application of PTFE coatings on various metallic substrates, with a focus on stainless steel and carbon steel, to improve their corrosion resistance, wear protection, and tribological performance. Utilizing advanced deposition techniques such as sol-gel and plasma spray, PTFE …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 32–38 Read article
-
TiO2 Refined Flux Provides Significant Impact on Saw Bead Shape, Particle Size, and Hardness
Abstract: This experiment is very interested in how adding titanium dioxide powder to submerged arc welding on low alloy steel plates affects the bead geometry, grain size, and hardness. The commercial fluxes were combined with powdered titanium dioxide at varying concentrations (2.5%, 5%, 7.5%, 10%, and 12.5%). No changes were made to the welding process parameters despite the variety of welding situations. It has been shown that the inclusion of titanium …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 70–80 Read article
-
Preparation and Characterization of TiO2 Nanoparticles by Green Method
Abstract: In this study, we attempted to synthesize TiO2 nanoparticles utilizing titanium tetrachloride as a precursor and an aqueous extract of Sansevieria plant leaves. Atomic force microscopy (AFM), X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) analysis were used to identify the synthesized TiO2 nanoparticles As per the surface topography, the average diameter of nanoparticles is considered as 67.73 nm. Debye-Scherrer equation was …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 61–67 Read article
-
Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2
Abstract: In this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. Nanoparticles of Al2O3 and TiO2 were characterized by SEM and EDS. The high peaks showed the respective presence of aluminium, oxygen for alumina and titanium and oxygen for titanium dioxide. The two samples of nano-cutting fluids were prepared. Alpha alumina, α-Al2O3 nanoparticles were used for the preparation of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 329–338 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Applications of Nanomaterials in Membrane Separation for Effluent Treatment in the Textile Industry
Abstract: The textile industry makes a significant contribution to economic growth. As the global population continues to increase exponentially, production rates are also on the rise to meet this growing demand. Unfortunately, this surge in production often leads to noncompliance with environmental regulations. While the textile industry supports economic development, it also contributes to serious pollution. Various dyes, such as azo dyes, Congo Red (CR), Crystal Violet, methylene blue, and methyl …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 1–8 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article