Search
68 articles for “structural attribute properties”
-
Analysis of Methods of Development, Structure and Properties of Engineered Bamboo Materials
Abstract: Engineered bamboo materials have received much attention in recent years due to their sustainable nature and potential as an alternative to traditional building materials. This article provides a comprehensive analysis of the development methods, structural features and properties of engineered bamboo materials. The introduction sets the stage by explaining the importance of such materials in relation to sustainability and environmental protection. The later analysis presents important research works and classifies …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 14, Issue 1, 2024 · pp. 25–32 Read article
-
Influence of Die Design Parameters and Mechanical Properties of AA5083 Through Equal Channel Angular Pressing Technique
Abstract: Refinement of the grain structure in bulk Materials is achieved using the Equal Channel Angular Pressing process. The material is pass through a die in this procedure that has two channels that meet at a particular angle. Finer grains are formed as a result of the material's deformation when it passes through die. The creation of ultra-fine grains is influenced by a number of die design characteristics. The effects of …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 2, 2024 · pp. 33–47 Read article
-
Optimizing Vehicle Structures Using Functionally Graded Materials of Aluminum and Carbon Fiber Reinforced Polymer Composites
Abstract: This article investigates the optimization of vehicle structures through application of functionally graded materials (FGMs), specifically aluminium and carbon fibre reinforced polymer (CFRP) composites. Such materials, known as FGMs, are characterized by spatial variations in composition and structure designed to improve so-called performance attributes. For the purposes of this research, the material properties of aluminium and CFRP composites are taken to be randomly distributed in thickness direction of a FGM …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 478–489 Read article
-
Demonstrative Research of Group VII Elements of the Periodic Table: Characteristics and Properties of Chemical Behavior
Abstract: The elements in Group VII, commonly referred to as halogens, are non-metals that exhibit similar chemical characteristics and a high level of reactivity, which can be attributed to their electron configuration. This paper seeks to provide an overview of the relationship between the electron structure and chemical behavior of the Group VII elements found in the periodic table. The primary goals include elucidating how the electron configuration influences the physical …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 2, 2025 · pp. 18–26 Read article
-
Enhancing Functional and Structural Properties of Advanced Materials through Scandium-based Nanostructures: Applications in Ceramics, Thermoelectrics, Memory Devices, and High-Strength Alloys
Abstract: This study explores the fabrication and properties of scandium-based nanostructured materials with applications in ceramics, glass, thermoelectric modules, switching devices, and strengthened alloys. Scandium oxide (Sc₂O₃) nanopowders were synthesized using precipitation techniques and subsequently sintered to create transparent ceramics with fine dispersion. Investigations into scandium-doped metallic glasses demonstrated enhanced plastic deformation, with notable tensile plasticity attributed to its unique nanoglass structure. A new scandium-doped thermoelectric material, ZnCdO, was also developed, …
Published in International Journal of Minerals · Vol. 1, Issue 2, 2024 · pp. 14–18 Read article
-
Role of Strontium in Structural and Dielectric characterstics of Barium Titanate
Abstract: Ba₀.₇₅Sr₀.₂₅TiO₃ (BST) compound was synthesized through the conventional solid-state reaction methodology, aimed at investigating its structural, microstructural, and dielectric characteristics. The structural characterization was executed employing X-ray diffraction (XRD), and the resultant diffraction patterns were refined utilizing the Rietveld method, which substantiated the establishment of a single-phase perovskite configuration exhibiting tetragonal symmetry and belonging to the P4mm space group. The refined lattice parameters revealed subtle distortions correlating with the substitution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1157–1163 Read article
-
Comprehensive Evaluation of Quercetin from Bauhinia purpurea for Its Anti-Acne and Anti-Inflammatory Potential, Including Advances in Quercetin-Loaded Nanogel Formulation
Abstract: Acne vulgaris is among the most prevalent chronic inflammatory dermatoses in clinical dermatology, afflicting a substantial proportion of the global adolescent and adult population. Conventional pharmacotherapies — including topical retinoids, benzoyl peroxide, and systemic antibiotics — remain the therapeutic mainstay; however, their long-term utility is progressively undermined by adverse cutaneous reactions, systemic toxicity, and the rising prevalence of antibiotic-resistant Cutibacterium acnes strains. These limitations have intensified scientific interest in plant-derived …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 2, 2026 Read article
-
Comparative Study of Uniform and Non-Uniform Beams Resting on Bi-Parametric Foundation Under Harmonic Load with Time Dependent Boundary Conditions
Abstract: In this study, we investigated uniform and non-uniform damped and time-dependent elastic beams resting on bi-parametric foundation subjected to harmonically varying moving load. The beam properties, including moment of inertia and mass per unit length, were assumed to be either constant or varying with position along the beam span in this study. The solution methods were based on Mindlin-Goodman method, Fourier sine transformation, weighted residual method, integral transformation, and theory …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 1, 2026 · pp. 33–50 Read article
-
Nano- Catalysts for Enhanced Performance in Hydrogenation Reactions
Abstract: The development of nano-catalysts has revolutionized the field of hydrogenation reactions, offering unparalleled efficiency and selectivity. This study explores the synthesis, characterization, and application of novel nano-catalysts designed to enhance hydrogenation processes. By leveraging advanced materials science techniques, we have engineered catalysts with precisely controlled particle sizes, shapes, and surface properties. These nano-catalysts exhibit remarkable activity and stability, attributed to their high surface area-to-volume ratios and unique electronic structures. Our …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 1, 2024 · pp. 22–27 Read article
-
Structural and Optical Properties of Nanocomposites of Polyethylene Oxide Embedded with Nano-ZNO
Abstract: Polymer nanocomposites have attracted significant attention in recent years owing to their unique properties and potential applications in a variety of fields. In this study, PEO-ZnO nanocomposites were prepared with different wt.% (5, 10 and 15) nano-ZnO particles incorporated into PEO matrix by a solution casting method. Structural and Optical properties of PEO-ZnO nanocomposites were studied. X-ray diffraction (XRD) studies suggest the incorporation of ZnO NPs into PEO matrix. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 586–600 Read article
-
A Comparative Analysis of Graphene Based Terahertz Reconfigurable Antennas: A Review
Abstract: In this paper, an overview of various reconfigurable antenna designs based on graphene material utilized for terahertz applications is presented. Terahertz electromagnetic spectrum is the term used to describe the frequency range between 0.1 and 10 THz. A promising material for THz reconfigurable antennas, graphene has a low skin effect and a built-in ability to tune by chemical or electrostatic gating. This study reviews the development of reconfigurable antenna for …
Published in Journal of Polymer & Composites · Vol. 11, Issue 5, 2023 · pp. 44–55 Read article
-
Polymers and Composites in the Design and Construction of Unmanned Aerial Vehicles: A Comprehensive Technical Review
Abstract: The emergence of Unmanned Aerial Vehicles (UAVs) over the last few years has mostly been made possible by breakthroughs in material science. This review is concerned with an overview of some of the polymers and composites that are being commonly used in drone manufacturing in recent times, especially in relation to the influence of material choice on drone performance and capability. It sheds light on the drastic change in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 874–882 Read article
-
SYNTHESIS AND CHARACTERIZATION OF Mn2+ DOPED LiPbX3(X = Cl, Br, I)
Abstract: In this paper the structural, electronic and optical properties of Mn doped Pb based cubic perovskites LiPbX3(X= Cl, Br and I) were studied by wet chemical method (sol gel method). For Mn doped LiPbX3(X= Cl, Br and I) NCs, MnCl2 and PbBr2 were added in molar feed ratio 1.35 mole% and nan crystal were examine with the help of TEM and their structure were confirmed by X-ray diffraction (XRD). Additionally, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 48–54 Read article
-
Green Synthesis and Evaluation of Electronic and Optical Properties of CdS/CdTe Quantum Dots
Abstract: The CdS/CdTe quantum dots (QDs), with altered concentrations of CdS, were synthesized using straightforward precursors through an environmentally friendly green method. The synthesized quantum dots were characterization by UV–visible absorption spectroscopy, Photoluminescence (PL), and Fourier Transform Infrared Spectroscopy (FTIR) to understand their electronic and structural properties. The average particle size is nearly consistent with the values derived from Brus's formula. The UV–visible spectra show a blueshift compared with pure sample, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 185–194 Read article
-
Optimizing Mechanical Properties of Polypropylene Fibre-Reinforced Coconut Shell Concrete
Abstract: This study investigates the impact of polypropylene (PP) fibre reinforcement on the mechanical properties of coconut shell (CS) concrete. The compressive strength of CS concrete is primarily governed by the strength of CS aggregates, with early-age failure attributed to poor bonding and later-stage failure influenced by aggregate strength. The incorporation of PP fibres significantly enhanced compressive, tensile, and flexural strength. At 28 days, compressive strength increased by 1.2–3.45% in CSF …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 6–12 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Histological Effects of the Antibiotic Gentamicin on the Ovarian Tissue of Female White Laboratory Rats
Abstract: This study aimed to evaluate the histological alterations induced by Gentamicin in the ovarian tissue of white laboratory rats. A total of 12 adult female rats were used and randomly divided into two groups, with each group consisting of six animals. The experimental group received Gentamicin at a dose of 120 mg/kg body weight administered as an injection once daily, while the control group received an equivalent volume of normal …
Published in International Journal of Antibiotics · Vol. 3, Issue 1, 2026 · pp. 1–8 Read article
-
A comprehensive study on elemental analysis and sustainable integration of CETP (common effluent treatment plant) sludge as a substitute to sand in concrete
Abstract: This study examines the utilization of sludge from common effluent treatment plants (CETP) as a fractional substitute for sand in M20 concrete mixtures. Its aim is to address disposal challenges associated with CETP sludge while promoting sustainable use of natural resources. The research assesses the structural and microstructural attributes of concrete mixes containing varying percentages of CETP sludge (0%, 10%, 20%, 30%, 40%, and 50%). Tests conducted include compressive, flexural, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 49–59 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article