Search
31 articles for “stir-casting process”
-
Experimental Investigations on Aluminium Composites Materials Using Stir Casting Process
Abstract: In physical operations, accoutrements in motorcars and aeronautical machine factors, aluminium and its alloys are extensively used. In this study an effort is made to ameliorate the properties of aluminium essence matrix compound (A356) for manufacturing of machine rudiments taking High Tensile strength, Hardness, Wear resistance and low coefficient of friction, aluminium alloy (A356) reinforced with aluminium oxide, graphite and silicon carbide. In the current work, A356 as base metal …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 302–323 Read article
-
Influence of Tib2 Wt. % on the Microstructural and Mechanical Properties of In-Situ Processed Stir-Cast Metal Matrix Composite of Al-6061
Abstract: Currently, there is an increasing trend in the automotive and aerospace industries towards the adoption of lighter and stronger materials to reduce weight and enhance fuel efficiency. Metal matrix composites must be developed in order to increase the overall performance of automobiles and aircraft as a result of this transition. Among the various composite materials employed, Aluminium Matrix Composites (AMCs) are frequently utilised to meet stringent industrial requirements. The purpose …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 655–661 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Comparative Investigation on Mechanical Properties of AMCs Fabricated through Liquid and Solid-State Fabrication Process
Abstract: This current research work is primarily focused on comparative experimental study on effect of two distinct fabrication process routes i.e. liquid state and solid state process and their corresponding parameters on microstructure and micro-hardness properties of Aluminium matrix composites (AMCs). In this work, AMCs were fabricated by reinforcing Al2O3 powder materials of 5, 10 and 15 wt.% into pure Aluminum (Al) matrix phase through two distinct processes; liquid state (stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 202–215 Read article
-
Utilization Waste Products as Reinforcement in Development of Composite Material: A Review
Abstract: In the modern world, businesses are responsible for producing a diverse range of waste products. Rice husks and eggshells are two examples of wastes that fall into this category. Both of these types of garbage are responsible for contributing to pollution in a variety of distinct ways. Eggshell, which is a common consequence of industrial operations, is one of the most significant contributors to the contamination of soil. This is …
Published in Journal of Polymer & Composites Read article
-
Tribological Study on SiC+Graphene Reinforced Al319 Composite andOptimization of Stir Casting Parameters
Abstract: The aluminium 319 (Al319) is a commonly used material for fabricating automobile components. Due to continuous friction and vibration, those components are subjected to significant wear. Therefore, it is necessary to improve the wear characteristics of this Al319. Hence, in this study Silicon Carbide (SiC) and Graphene nanoparticles (GNPs) are reinforce to Al319 via electro-magnetic stir casting method to optimize wear characteristics without its affecting mechanical properties. Various proposition of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 105–123 Read article
-
Optimizing Parameters for Dry Sliding Wear Control in Stir-Cast AA7050/SiC Composites
Abstract: Using a pin-on-disc tribometer, this study examined the dry sliding wear behavior of AA7050/SiC composites. The production of this metal matrix composite was achieved through the stir-casting process, which involved an initial step of melting the AA7050 alloy, followed by the careful introduction of silicon carbide (SiC) particles, stirring to achieve uniform dispersion, and finally, casting the molten mixture. Wear rate (WR) was determined by three operational parameters: SiC reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1624–1635 Read article
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Experimental Analysis of Mechanical Characteristics of Aluminium Matrix Hybrid Composite Using Seashell Powder And Coconut Shell Powder
Abstract: The purpose of this study is to investigate the manufacturing processes and mechanical properties of composites made of marine shell powder, coconut shell powder, and aluminium. In our project, the MMC was made of aluminium with seashell powder and aluminium with coconut shell powder. A stir casting process fabricated the Composite. The composition of aluminium, seashell powder and coconut shell powder varies. According to the criteria established by the American …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 487–494 Read article
-
Experimental Investigation of Boron Carbide Reinforced Al-Mg-Si Alloy Nano Composites by the Stir Casting Method Using Machine Learning Algorithm
Abstract: For the purpose of this experiment, Al-Mg-Si alloys were manufactured with the use of the stir casting process with a metal mold. The alloys had different weight percentages of nano boron carbide, which ranged from 0 to 4% by weight. The intervals between the percentages were 0.5. Following that, the microstructural and mechanical parameters of the as-cast alloy and the nano composites were compared and contrasted according to ASTM Standards …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1766–1779 Read article
-
Influence of the Load, Sliding Speed, and Weight Fractions on Wear of a Hybrid Aluminium Metal Matrix Composite
Abstract: The vital focus of the research is intended in examining the aspect that impact the rate of wear for a hybrid aluminium metal matrix composite. The percentages of two reinforcements that are employed, the weight, and the sliding speed are the variables taken. The procedure entails employing the vortex-stir casting process to produce the hybrid composite. Utilizing a pin-on-disc apparatus, the fabricated composite materials are evaluated in compliance with the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 188–198 Read article
-
Investigation of Residual Stress, and corrosion behavior of AA6082/Al 2 O 3 /C/ Si 3 N 4 Composite Material
Abstract: The main objective of the current study was to create AA6082/ Al2O3/C/Si3N4 Composite Material by the use of stir casting. The properties of the AA6082/ Al2O3/C/ Si3N4 Composite Material shown a significant improvement, with a micro-hardness rise of 13.5% and a residual stress decrease of 60%. As the testing parameters were increased, the residual stress of the AA6082/ Al2O3/C/ Si3N4 Composite Material rapidly decreased from -65MPa to -15MPa. An electromagnetic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1104–1109 Read article
-
Drilling Parameters Optimization in LM6/B4C/Fly ash Hybrid Composites by Taguchi Technique
Abstract: Aluminium matrix composites (AMCs) are challenging to machine due to its abrasive characteristics. Because of the broad adoption of MMCs, it is vital to create sufficient equipment to facilitate efficient manufacturing. The current study utilizes signal-to-noise ratio (S/N) analysis to determine the ideal machining parameters for drilling AMC’s. The goal with this study is to investigate the effect of feed rate (FR), drill type (D), speed (SS), reinforcing material R …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 890–897 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
An Analysis of Machining Parameters for Metal Matrix Composite
Abstract: The electro-discharge machining analysis of hybrid Composite is presented in this work. Variables are chosen for the input process parameters. The material removal rate is acknowledged as an output parameter, together with the current, graphite and silicon carbide percentage and pulse on time. We used the Taguchi Method to conduct our experiments. To create the theoretical model and look into how process parameters affect the rate at which material is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 76–85 Read article
-
AI-Driven Prediction of Square-Hole Laser Trepanning Performance in AA7075/15%SiC/15% Glass Fiber Hybrid Composites Using Taguchi–ANOVA and Deep Neural Networks
Abstract: Hybrid AA7075 composites reinforced with 15% silicon carbide (SiC) and 15% glass fiber were fabricated via the stir casting technique to improve machining and structural performance. The addition of dual reinforcements into the aluminum matrix was aimed at enhancing hardness, thermal stability, and surface quality during non-traditional drilling operations. Square-hole drilling was performed using a laser trepanning process, and the key responses—hole size accuracy, surface roughness, and taper angle—were systematically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1932–1943 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Improvement of Geometric Tolerances and Mechanical Properties of Aluminum Hybrid Metal Matrix Composites
Abstract: In the field of metal matrix composite materials, there has been a generous thrust towards the development of electrical discharge machining (EDM). In this study, stir casted aluminum hybrid metal matrix composites were successfully machined using EDM by analyzing the input process parameters namely, pulse-on time, peak current, and gap voltage using L27 orthogonal array. The ideal conditions for various output responses such as material removal rate, circularity, and radial …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1583–1592 Read article
-
Enhancements in Titanium Matrix Composites: A Multifaceted Exploration of Various Structural Ceramics Reinforcement
Abstract: This research study delves into the comprehensive exploration of Titanium Matrix Composites (TMCs) reinforced with Silicon Carbide (SiC), Alumina (Al2O3), and Boron Nitride (BN). The investigation is structured into three key phases, each addressing essential aspects of TMCs: Phase 1 involves materials and manufacturing, where TMC coupons were fabricated through the stir casting technique with varying compositions of aluminum and silicon carbide. Phase 2 focuses on characterization and defect detection, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 83–94 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article