Search
60 articles for “single band”
-
Performance Analysis of Single Band PIFA for 4G/LTE Mobile Communication Networks
Abstract: This paper presents a Planer Inverted F Antenna (PIFA) for Fourth Generation (4G) Long Term Evaluation (LTE). The proposed antenna is designed on FR4 substrate and the dimension is 22.5 mm x 18.5 mm x 2.8 mm. The Antenna covers the LTE 40 frequency band application from 2.3–2.4 GHz (resonance at 2.35 GHz). Different performance parameters: return loss, VSWR, radiation pattern, current distribution, gain and efficiency are analyzed. The proposed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 3, 2016 · pp. 1–7 Read article
-
Two Parabolic Shape Microstrip Patch Antenna for Single Band Application
Abstract: AbstractIn this article, a two parabolic shape Microstrip textile antenna has been simulated under CST Software using bending material i.e. Jeans. The dielectric constant of Jeans material is 1.7. For antenna to be wearable, Jeans substrate is used. The return loss of Two Parabolic shaped patch antenna is –43 dB at 7.618 GHz resonant frequency. It covers the bandwidth from 5.386 to 8.971 GHz. In this paper, simulated results like …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 33–36 Read article
-
Comparison of Ultra Wide Band Indoor Multipath IEEE 802.15.3 Channel Model
Abstract: ABSTRACT A very large bandwidth of frequency (3.1–10.6 GHz) has been allocated to UWB systems. A single-band UWB signal propagates differently in the lower and upper bands of the spectrum due to the size of its bandwidth. The lower part of the signal can be obstructed more easily and the man-made interferences are not homogeneously distributed over the whole spectrum. The first experimental results obtained for a UWB channel show …
Published in Journal of Communication Engineering & Systems · Vol. 2, Issue 3, 2012 · pp. 20–25 Read article
-
Wideband Bandstop Filter Using Triangular SRR-DGS
Abstract: This article presents a dumbbell shaped triangular split ring resonator (SRR) in the design of wideband bandstop filter. Initially, a conventional dumbbell shaped triangular defective ground structure (DGS) is used to realize the single bandstop filters at the frequency of 3.55 GHz. This triangular shaped DGS structure is modified to a new structure to realize a wideband bandstop filter characteristics with the frequency range of 3.3 to 4.5 GHz which …
Published in Journal of Electronic Design Technology · Vol. 8, Issue 1, 2017 · pp. 11–16 Read article
-
Circular Antenna with Square Slot at 2.1 GHz for RF Energy Harvesting Applications
Abstract: In this paper, a single band circular antenna loaded with square slots having an application in RF energy harvesting is introduced. Proposed antenna containing of a circular antenna along with square slot loaded inside in the patch. For an antenna design, Computer Simulation Technique (CST) solver simulator was used. The antenna is being fabricated and its characteristics were measured. The band is covering most of the wireless applications. The simulated …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 22–24 Read article
-
Study and Performance Analysis of Orthogonal Frequency Division Multiplexing with Different Modulation for Rayleigh Channel Model
Abstract: AbstractFor the advancement of wireless communication systems, methods such as MIMO, OFDM and integrating them together as MIMO-OFDM are very useful. OFDM is used in numerous wireless transmission standards nowadays. In OFDM, high rate data stream is divided into low-rate streams which are transmitted together over a number of subcarriers. A broadband and frequency-selective channel are transformed into a multiplicity of parallel narrow-band single channels by the OFDM modulation. By …
Published in Journal of Communication Engineering & Systems · Vol. 9, Issue 2, 2019 · pp. 76–80 Read article
-
Characterization of Dielectric Resonator Antenna (DRA) for Broadband Applications: An Overview
Abstract: This article presents a brief review on realization techniques of broadband spectrum using Dielectric Resonators (DRs). Dielectric materials have attractive features in millimeter (mm) wave regions. In this article, attention has been focused on broadband design techniques using DRAs. The dielectric resonators possessing multi-resonant frequencies have been used for the purpose. These multi-resonant frequencies could be merged together to produce the required broadband spectrum. The primary goal of this review …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 6–14 Read article
-
Analysis of N-Slot Loaded Patch Antenna for Tripple Band Operation
Abstract: ABSTRACT In this paper, the analysis of N-slot loaded microstrip antenna having single and double dielectric layer with coaxial feeding is presented using circuit model analysis. The antenna gives triple resonance and the separation between these resonances depends on the dimension of the slot. This antenna gives wide bandwidth for all three resonant frequencies for single dielectric and gives four bandwidths for double dielectric layer. It is observed that the …
Published in Journal of Communication Engineering & Systems · Vol. 2, Issue 3, 2012 · pp. 11–19 Read article
-
Solar Heat Pipe Design and Heat Loss Analysis
Abstract: Abstract: This paper is detailed on the design and heat loss analysis of solar heat pipe. Solar heat pipe is thermal device which use to transfer abundant amount of solar energy to working fluid through very smaller cross section area. Solar heat pipe server so many applications in engineering, i.e., water heating system, aerospace application, refrigeration and air conditioning and process industries. The design of heat tube includes finding diameter …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 24–28 Read article
-
Emission Characteristics Investigation of Single Cylinder VCR Diesel Engine using Calophyllum inophyllum Biodiesel Blends as Fuel
Abstract: This work presents experimental investigation on a single cylinder vertical diesel engine with Calophyllum inophyllum (Undi) biodiesel blends. Experiments were conducted using pure diesel, 25, 50 and 75% blends by varying the compression ratio, and the exhaust emission characteristics obtained using a computerized exhaust gas analyzer are presented here. From the results obtained, it was concluded that the biodiesel blends had equivalent emission characteristics with no modifications in the VCR …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 1, 2016 · pp. 1–7 Read article
-
LTE & 5G NR Carrier Aggregation Network Optimization through Advanced Measurement Configuration
Abstract: The ability to merge numerous frequency carriers—component carriers—to increase transmission bandwidth and throughput speeds over what can be achieved with a single carrier is known as carrier aggregation, and it is a crucial technology in 4G LTE and 5G networks. Cellular devices may attain gigabit data speeds by combining carriers from several frequency bands, such as 600 MHz to mm Wave frequencies, to increase downlink and uplink capacity. This study …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 10, Issue 2, 2023 · pp. 35–45 Read article
-
Effect of Notching on the Return loss of T-shaped Microstrip Patch Antenna for Wireless Communication System
Abstract: AbstractWith the loading of a pair of notches, a T-shaped slot and a pair of rectangular slots, novel bandwidth enhancement of microstrip antenna is demonstrated. The design is fed through a single coaxial probe. The proposed antenna is a modification of a simple T-shaped antenna which provides good radiating characteristics with enhanced bandwidth. The proposed antenna covers the S band and is used for many wireless applications. The proposed antenna …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 2, 2017 · pp. 7–11 Read article
-
Polarization Reconfigurable Antenna: Design and Analysis
Abstract: This paper presents an analysis and design of a polarization reconfigurable microstrip patch antenna fed with single and dual feeds operating at WLAN frequency. For a single feed structure a square patch is designed first and is perturbed for obtaining circular polarization. Using PIN diodes this design can be made to generate different polarizations. In case of a dual feed structure the radiating square patch has dual feeding provision and …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 1, 2015 · pp. 1–8 Read article
-
Review Paper of Designing of CPW Fed Micro-strip Patch Antenna for UWB and Bluetooth Application
Abstract: A compact size coplanar waveguide (CPW)-fed micro strip antenna is proposed for radiation of the frequency spectrums 2.36 to 2.49 GHz (Bluetooth) and 3.1 to 10.6 GHz (UWB-Ultra wideband) covers. Both are unlicensed bands but in UWB band there are two licensed bands i.e. WLAN and Wi-MAX present in the frequency range of 5.12 to 5.825 GHz and 3.4 to 3.7 GHz respectively. In this design we have single CPW-fed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 35–40 Read article
-
Compact Circularly Polarized Patch Antenna with U-Slot and Defected Ground
Abstract: A compact single-feed circularly polarized (CP) patch antenna at L-band is designed. The antenna contains a U-slot and is designed with DGS technique to reduce the size of antenna. With the presence of the U-slot, the antenna fabricated on a high-dielectric-constant (10.2) substrate achieves a reasonable axial-ratio bandwidth. The operating frequency is 1.521 GHz. The measured gain is 2.5 dBi, and bandwidth is 86.8 MHz.
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 16–20 Read article
-
Advanced Liquid Crystal Polymer Substrate for Flexible Antenna Design
Abstract: A type of thermoplastic polymers known as liquid crystal polymers (LCPs) is frequently used to package millimeter (mm)-wave, microwave, and radio frequency (RF) integrated circuits that operate at frequencies as high as 60GHz. LCPs are of prospective relevance as packaging material for advanced circuits at mm-wave frequencies due to their appealing electrical, thermal, and mechanical qualities and comparatively low cost. Flexible and conformal antennas are made possible by LCP's exceptional …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 233–245 Read article
-
Characterizing Electromagnetic Behavior of X-Band Rectangular Waveguide with Convex and Concave Shaped Ridges Using Hp-Finite Element Method
Abstract: In this research study, we explore the behavior of electromagnetic waves as they propagate through ridge waveguides with convex and concave shapes, having both single and double walls. To analyze the waveguide's characteristics, we employ the highly accurate hp-finite element method (hp-FEM). The focus is on investigating the impact of these ridge deformations on cutoff frequencies and bandpass for TE10 and TE20 modes. To benchmark our findings, we compare the …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 1, 2023 · pp. 27–34 Read article
-
A Simplified Indirect Control Scheme for Shunt-active Power Filters
Abstract: This paper presents a simplified indirect control scheme for shunt-active power filters for compensating harmonic currents and improving power factor. The control is based on the simple method for generation of the reference compensating current. The reference compensating current is obtained by subtracting load current from reference source current. PI controller is used to adjust the amplitude of the reference source current that regulates the DC capacitor voltage. Hysteresis band …
Published in Journal of Power Electronics and Power Systems · Vol. 2, Issue 1, 2012 · pp. 1–7 Read article
-
Effect of Annealling on Optical Band Gap of Fe2O3 Thin Films on Amorphos Transparent Glass Substrate by Spray Pyrolysis Method
Abstract: The Fe 2 O 3 thin film has widely used photo-electrochemical cells. In this paper, the optical properties like band gap of thin films is depend on annealed temperature at 100 o C and 200 o C was discussed. The optical property of Fe 2 O 3 are studied by UV- Vis spectroscopy .The optical band gap decreased after increasing annealing temperature. The refractive index of Fe 2 O 3 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 25–29 Read article
-
Signal Transmission in Underwater Using Passive Time Reversal for Single and Multiuser
Abstract: This paper describes passive time reversal communications, which enables multiple users to send information simultaneously to the time reversal array. Experimental results at 3.5 kHz with a 1 kHz bandwidth demonstrate that as many as six users can transmit information over a 4 km range in a 120 m deep water using quaternary phase-shift keying (QPSK) modulation, achieving an aggregate data rate of 6 kb/s. Moreover, the same data rate …
Published in Current Trends in Signal Processing · Vol. 6, Issue 2, 2016 · pp. 49–54 Read article