Search
1068 articles for “reinforce”
-
Experimental Analysis and Comparison of Lattice Reinforced Beam and Conventional Reinforced Beam
Abstract: The experimental investigation focused on the various types of shear reinforcement in the reinforced concrete beams.Conventional RCC beam and latticed RCC. These two types of shear reinforcement are studied thoroughly; conventional stirrups, welded latticed bars, Beam strength as well as beam deflection are the main parameters in the project that was considered in this study. Shear failure in reinforced concrete beams is one of the most unwanted modes of failure. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 20–23 Read article
-
Performance of Circular Model Footing Resting on Sand Bed Reinforced with Vertical Reinforcement in Dry Condition
Abstract: Soil stabilization is the process of improving the engineering properties of the soil. The good old method of stabilization is by using the chemicals stabilization, whereas the recent method of improving the strength of the soil is by using the vertical reinforced earth. In the present work sand is filled in the 250x250x375 mm MS tank by using sand raining technique at a relative density of 67%. MS circular plate …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 1–9 Read article
-
Comparative Evaluation of Fiber-Reinforced Composite and Elastic Fiber Posts in Reinforcing Peri-Cervical Dentin: an In-Vitro Study
Abstract: This study evaluates the fracture resistance of short-fiber reinforced composite and elastic fiber posts compared to conventional hybrid composites in reinforcing peri-cervical dentin of endodontically treated teeth. Methods: The crowns of thirty single-canal mandibular premolars were resected to achieve a dimension of 4mm from 1mm below the highest point of the proximal cervical line. In Group 1, teeth underwent endodontic treatment with gutta-percha filled up to the cement-enamel junction (CEJ) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 143–149 Read article
-
Effect of Reinforcement on Bearing Capacity of Sand
Abstract: The reinforced earth concept, which is now being evaluated with increased significant encompasses formation of a composite of a soil with tension resistance reinforcing elements such as metallic and nonmetallic strips, bars, rods fibers or nets in the soil. The objective of using the reinforcement is to supress the normal tensile strains in the soil mass through frictional interaction. Flexible nature of reinforced earth mass enables it to withstand large …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 3, 2014 · pp. 8–12 Read article
-
Bond Response of RCC Cube by using Glass Fiber Reinforced Polymer Bar
Abstract: The results of an experimental examination into the flexural and bond characteristics of Glass fibre reinforced polymer material in structural concrete are presented in this paper. In this study, glass fibre reinforced polymer bars of varied diameters were used. The performance of these bars with full and partial steel bar replacement is investigated. The major goal of this inquiry is to use Glass fibre reinforced polymer bars in water retaining …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 1–6 Read article
-
Centrifugal Casting of Nano Crystalline TiB2 Reinforcement Particulate Reinforcement in Al-Alloy Matrix
Abstract: A method of producing Nano size TiB2 particles within an aluminium matrix is the in situ reaction synthesis method, using KBF4 and K2TiF6 potassium based bearing fluxes. The advantages of this in situ reactive process are a small particle size and good particle/matrix interfacial bonding. However, this method is limited to producing low particulate volume percentage material (˂6 vol%). To overcome this limitation, centrifugal casting has been investigated. A series …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 7–13 Read article
-
Optical, Thermal Properties of Cadmium Chloride Reinforced PVA:PVP Blend Films
Abstract: In this study, pure polymer blend film (PVA:PVP) and salt (CdCl2.H2O) reinforced polymer blend films were prepared at different weight ratios (10, 20, 30) wt% using the casting method. The optical and thermal properties of all polymer blend films were studied.The transmittance and absorbance spectra were recorded within the wavelength range (190-1100) nm. The effect of salt weight ratio on the energy gap of salt (CdCl2.H2O) reinforced polymer blend films …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 46–52 Read article
-
Evaluation of Equal Settlements of Geosynthetic Reinforced Piled Embankment
Abstract: Geosynthetic-Reinforced Pile-Supported Embankments (GRPSE) have emerged as an effective alternative to traditional geotechnical methods Constructing of piled embankments on soft soils. Design of pile-reinforced embankments and evaluation of plane of equal settlements is critical in the case of soft soils. If the embankment height exceeds the height of the plane of the equal settlements, settlements cannot be seen on the pavement, otherwise, differential settlements may be observed on the pavement. …
Published in Journal of Structural Engineering and Management · Vol. 9, Issue 3, 2022 · pp. 28–33 Read article
-
Water Hyacinth-Derived Biopolymers as Reinforcements for Sustainable Fiber-Reinforced Polymer Composites
Abstract: Composting has gained significant attention for sustainable waste management and nutrient recycling. This study investigated the efficacy of water hyacinth (Eichhornia crassipes) as a composting material to produce nutrient-rich organic fertilizer. Water hyacinth compost inoculated with nitrogen-fixing (Azotobacter chroococcum) and phosphate-solubilizing bacteria (Pseudomonas putida) exhibited increased nitrogen and phosphorus content compared to uninoculated compost or cattle dung compost. Wheat grown with biofertilizer-enriched water hyacinth compost displayed significantly improved grain yield, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1012–1017 Read article
-
Recent Advancements and Layering Techniques in Nanoparticle-Reinforced Hybrid Composites: A Comprehensive Analysis
Abstract: This review examines the advancements in nanoparticle-reinforced fiber composites, focusing on natural fibers, synthetic fibers, hybrid composites, and fiber metal laminates (FMLs). Nanoparticles such as SiO₂, TiO₂, Al₂O₃, and graphene, introduced at 0.5–3% volume, have significantly enhanced mechanical, thermal, and wear properties. Comparative studies reveal that hybrid composites reinforced with 1–2% nanoparticles show a 20-30% increase in tensile strength and a 15-25% improvement in thermal stability compared to non-reinforced composites. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 83–89 Read article
-
Optimization of Consolidation Temperature and Time for Self Reinforced High-density Polyethylene Composite
Abstract: Demand for high-density polyethylene (HDPE) for industrial production of domestic and commercial commodities has made it necessary to find ways of improving its mechanical properties. A viable approach towards this is the addition of reinforcements such as glass fibers. However, glass fiber reinforced composites suffer limitations because of reduced recyclability, great weight and difficult to thermo-form. In order to improve properties such as specific strength, stiffness and thermoformability of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 1, 2021 · pp. 19–26 Read article
-
Study of Influence of Corrosion and Cracking on Bond Behavior of Reinforced Concrete Member
Abstract: Reinforced concrete, as composite material has occupied special place in the modern construction of different type of structure. Reinforced concrete is inherently durable and near maintenance free construction material. Service life of reinforced concrete structure can be significantly reduced when the corrosion of reinforcing steel is initiated; the product of corrosion expands and occupies greater volume than original volume of steel, eventually causes cracking of concrete. The composite action of …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 58–67 Read article
-
Enhancing Fire Performance of Steel Reinforcement in RCC Structures: A Comprehensive Investigation
Abstract: The assessment, repair, and rehabilitation of fire-damaged structures have become crucial due to the rise in significant building fires.This particular field necessitates proficiency in various domains including concrete technology, material science and testing, structural engineering, and repair materials and processes. Researchers and developers are currently engaged in extensive efforts to tackle the challenges related to improving the fire resistance of steel reinforcement in reinforced concrete (RCC) structures. These endeavors involve …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 33–40 Read article
-
Fabrication and Experimental Investigation on Mechanical Properties of Quartz Particulate Reinforced Aluminium Composite
Abstract: Composites are processed by adding a reinforcement phase in a base metal. The base material is known as a matrix and the constituent that is added is called reinforcement. The matrix acts as a support while the reinforcements attach themselves in their respective positions which results in the synthesis of a material which has different mechanical and thermal properties compared to their raw materials. Since aluminium is used as a …
Published in Journal of Production Research & Management · Vol. 14, Issue 3, 2024 Read article
-
Taguchi Design for Optimization of Reinforcement at Toe area of Carbon Fiber Foot Plate
Abstract: This paper uses the Taguchi method to design experiments to determine the effect of various factors, such as fiber orientation, fiber type, and number of layers, on the reinforcement at the toe area. The experiments are Taguchi method, which allows for identifying the optimal combination of factors that minimize the carried out using a combination of computer simulations and physical tests. The results are analyzed using the variability in the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 115–121 Read article
-
Comparative Study of Corrosion Resisting Behavior of Steel Reinforcement
Abstract: The corrosion of reinforcing steel in concrete had received increasing attention in recent years because of the severe damage to concrete structures. It is so severe that we need a high cost dramatic repair of the structure. The corrosion of reinforcing steel results mainly from the destruction of the protective oxide film by chloride attack or/and carbonation of the concrete. Extensive research into factors contributing to corrosion of reinforcing steel …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 1, 2016 · pp. 28–35 Read article
-
Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage
Abstract: Metal Matrix Composites (MMCs) have been prepared by compo casting method. The effect of matrix material on the wettability/compatibility of refinement with matrix is studied. Silicon and boron ceramic particles were used as reinforcement in aluminum matrices. The study of density, micro-hardness and the tensile strength has been done in order to characterize the same. It is found that Al-SiC MMC shows an increase in density with increasing weight percentage …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 1, 2015 · pp. 1–6 Read article
-
Study Analysis of Nano Particle based Fiber Reinforced Plastics (FRP) Composites
Abstract: Utilization of Fiber reinforced plastics (FRP) composites for development of new and modification of already present structures has increased largely in the past few decades. Fiber Reinforced Polymer composites have many qualities like corrosion resistant, longer life time, less weight, specific stiffness and high strength, are effortlessly built, and can be custom-made to fulfill execution prerequisites [1]. Fiber Reinforced Polymer composites are ordinarily manufactured utilizing a polymer framework, for example, …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 17–22 Read article
-
A brief review on Fiber reinforced polymer made by Fused Deposition Modeling
Abstract: Rapid prototyping (RP) techniques are used to quickly fabricate prototypes directly from CAD data using 3D printing or additive manufacturing. Fused Deposition Modeling (FDM) is one of the popular techniques of RP used to produce polymer parts, but due to limited mechanical properties of purely printed polymer using FDM there is a need developed to produce composites using FDM. The aim of this review article is to analyze the fiber …
Published in Journal of Production Research & Management · Vol. 8, Issue 1, 2018 · pp. 25–28 Read article
-
Comparative Evaluation of the Effect of Adhesive Restorative Techniques on the Reinforcement of Simulated Immature Permanent Teeth: An in Vitro Study
Abstract: The aim of the study was to compare the reinforcement effect of 3 different adhesive restorative techniques on simulated immature maxillary central incisors after apexification. A total of 30 simulated immature permanent maxillary central incisors were randomly assigned into 3 groups (n=10), according to the reinforcing technique used: Group 1: Nanohybrid composite. (Tetric N-Ceram Ivoclar Vivadent), Group 2: Short-fiber reinforced composite (everX posterior GC EUROPE) extended 3mm below CEJ, covered …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 69–75 Read article