Search
59 articles for “polymer gel”
-
Rheological Studies of a Cross-Linked Polymer Gel System
Abstract: The petroleum accumulations are found associated with water and it is rarely obtained without accompanying water production. Water production is a major technical, environmental, and economic challenge associated with oil and gas extraction. Rheological findings are of fundamental importance for the development, manufacture and processing of innumerable products. Polymeric gels exhibit a wide range of rheological properties and they are stable both mechanically and thermally in most cases thus are …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 13–26 Read article
-
A Study on the Effect of Ionic Conductivity on Addition of Salt for Polymer Nanocomposite Gel Electrolyte for Solar Cell Applications
Abstract: AbstractDye sensitized solar cells (DSSC) have attracted greater attention in the recent years because of their relatively high energy conversion efficiency and low cost. In the DSSCs, the electrolytes play a vital role in the determination of the efficiency and long term stability. In this investigation, we report on the synthesis, characterization and conductivity study of polymer nanocomposite gel electrolyte. Cadmium oxide nanoparticles were added into polymer blend of poly …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 8–15 Read article
-
Biodegradable and Natural Fiber-Reinforced Polymer Composites for Advanced Controlled Drug Delivery Systems
Abstract: Polymer-gel forms have gained popularity in medicine as means of medication delivery over the skin. This is so since they enable medications pass the skin more readily. These products allow medicine to be administered without surgery and provide continuous active ingredient supply. They are excellent for long-term therapy for managing conditions that keep resurfacing. From tiny synthetic ones to huge biological ones, polymer gels can store a wide spectrum of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 271–284 Read article
-
Facile Fabrication and Characterization of Novel Sterculia Gum–graft-poly(n-isopropylacrylamide-co-acrylamide) Hydrogel for Efficient Removal of Cationic Dyes from Aqueous Solution
Abstract: Water is indispensable component of life. Contamination of water is a severe problem that affects human health, aquatic vegetation, and fauna. Aside from various effluents, a variety of cationic dyes generated by industrial effluents contributes significantly to water contamination. In this study, a sterculia gum graft-poly(n-isopropylacrylamide-co-acrylamide) hydrogel was made using a graft copolymerization technique with N,N′-methylene-bis-acrylamide as a crosslinker, ammonium persulphate as an initiator, and tetramethylethylenediamine as an accelerator to …
Published in Journal of Polymer & Composites · Vol. 10, Issue 2, 2022 · pp. 29–59 Read article
-
An Overview of the Performance of Eco-friendly Polymers for Improving Oil Recovery from Existing Oil Fields
Abstract: The demand for fossil fuels especially crude oil as well as its price is increasing day by day and have led to the search for newer methods and techniques for oil extraction worldwide and these are collectively known as enhanced oil recovery methods. This paper reviews the present status of the different types of organic and inorganic cross-linked polymers used by the Oil Industry for increasing the oil production. The …
Published in Journal of Petroleum Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 1–15 Read article
-
Determination of Accurate Molecular Weights of Cationic Polyacrylamide Polymers through Advanced Gel Permeation Chromatography Triple Detection Technique
Abstract: AbstractGel permeation chromatography along with refractive index detector or UV detector provides relative molecular weight information along with PDI with respect to standard used. If standards are of different nature than sample such relative results just are used to compare polymers and co-polymers among themselves. These detectors fail to reveal information about other important polymer characters like size of polymer in solution (hydrodynamic volume), branching pattern and intrinsic viscosity which …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 24–28 Read article
-
Properties and Recent Progress in Oxide-Based Thermoelectric Materials
Abstract: Advanced thermoelectric materials that can be used efficiently for energy conversion have received significant research interest for the last decade because of the mounting demand for sustainable and eco-friendly energy technologies. The main advantage of thermoelectric materials is their capability to directly convert the waste heat into electrical energy which makes them highly promising for the recovery of waste heat from industrial processes, automotive systems and power generation applications. Oxide-based …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 2, 2026 Read article
-
Floating In-Situ Gel for Gastric Retention Delivery
Abstract: When taken orally, medications with a limited window of absorption in the gastrointestinal tract (GIT) are typically accessible to the extremities due to the partial release of the active component and the brief residence period at the absorption site. Because they prolong the duration of the drug's presence in the stomach, they are made with high density and have the capacity to swell. Because oral fluids go more quickly through …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 11, Issue 2, 2024 · pp. 24–32 Read article
-
Improving Photocatalytic and Antibacterial Properties of Zein/Polyvinyl Alcohol Polymer Composite Film by Dispersing TiO2 Nano Particles
Abstract: Zein/polyvinyl alcohol/nano-TiO2 composite film was effectively blended using a solution casting method. Mechanical, photocatalytic, and antibacterial properties of the composite film were evaluated. The breaking elongation of the composite film increased up to the maximum loading of 0.4% of nano-TiO2. The humidity and moisture content relationship was estimated with standard modified models of Halsey, Oswin, Chung Pfost, and Henderson. It was found that the Halsey model was the most suitable …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 110–127 Read article
-
Advances in Polymeric In Situ Drug Delivery and Soft Biosensors: Innovations in Biochemical Sensing and Personalized Healthcare
Abstract: Advanced healthcare and personalized medicine are undergoing a transformation thanks to in situ medication delivery systems and biochemical sensor technology. Polymeric in situ drug delivery systems form gels upon administration, releasing medications in a controlled manner and providing benefits such as ease of administration and enhanced patient compliance. Similarly, advancements in soft electronics, including flexible and stretchable biosensors, enable continuous, in situ biochemical monitoring, conforming to complex biological environments like …
Published in International Journal of Cheminformatics · Vol. 2, Issue 1, 2024 · pp. 27–32 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Review on Sustained Released Matrix Tablet
Abstract: Pharmaceuticals often use sustained release dose forms to prolong the therapeutic agent’s presence in the bloodstream and maintain a consistent plasma profile. The matrix governs the drug’s release rate. Hydroxypropyl methyl cellulose, a release retardant, is a key excipient in formulations due to its ability to promote sustained release. Techniques that include wet granulation, direct compression, or the dispersion of solid particles within a porous matrix, integrating polymers, like polymethyl …
Published in Trends in Drug Delivery · Vol. 12, Issue 2, 2025 · pp. 60–69 Read article
-
Peroxide Modification of Polyolefins and Long Chain Branching and Molecular Weight Distribution Comparative Studies Thereof using HTGPC
Abstract: AbstractThe modification of polypropylene by combined use of peroxides and multifunctional components (MFC) is widely carried in order to introduce the long chain branching in the polymer. The presence of long chain branching in the polymer structure have effect on the processability, the melt strength and hence, the end-use of polyolefin polymers. The high temperature gel permeation chromatography (HTGPC) is widely used technique in the estimation of molecular weight, molecular …
Published in Journal of Polymer & Composites · Vol. 4, Issue 1, 2016 · pp. 9–15 Read article
-
Fabrication and Characterization of Diacerein Loaded Nanosponge for Topical Delivery
Abstract: Diacerein, an anti-inflammatory drug, which comes under BCS class II, commonly used in treatment of osteoarthritis has limited by its poor solubility and bioavailability when administered topically. This study aimed to develop and evaluate diacerein-loaded nanosponges gel using varying concentrations of ethyl cellulose and polyvinyl alcohol (PVA) to enhance its delivery. Nanosponges were prepared using an emulsion solvent evaporation technique, with different ratios of ethyl cellulose (0.05-0.250%) and PVA (0.2-0.3%). …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 2, 2025 · pp. 26–46 Read article
-
Gastro Retentive Drug Target System: Its Needs, Advantages, Limitation and Approaches
Abstract: Background: Gastro retentive drug delivery systems (GRDDS) address limitations of oral therapy for drugs with poor solubility, instability at intestinal pH, or narrow absorption windows by prolonging gastric residence and increasing contact with the gastric mucosa. Objectives: To review GRDDS approaches—floating systems, mucoadhesive systems, and super porous hydrogels—with emphasis on formulation strategies and polymer–excipient selection to enhance gastric retention, modulate buoyancy/swelling/adhesion, and ultimately improve oral bioavailability and therapeutic outcomes for …
Published in Trends in Drug Delivery · Vol. 13, Issue 2, 2026 · pp. 47–58 Read article
-
Polymer Electrolytes for Flexible Energy Storage
Abstract: The research explores polymer electrolytes as promising materials for flexible energy storage applications, driven by the growing demand for wearable and portable electronics. Polymer electrolytes, including solid, gel, and composite types, offer key advantages such as mechanical flexibility, lightweight design, and improved safety over traditional liquid electrolytes. This study reviews recent developments in materials like polyethylene oxide (PEO), polyvinylidene fluoride (PVDF), and ionic liquid-based systems, focusing on their ionic conductivity, …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 27–35 Read article
-
Biomedical Approach to Developing and Characterizing Chitosan Nanoparticles Encapsulating Urapidil for Hypertension Management
Abstract: The aim of this study was to create Chitosan Nanoparticles loaded with Urapidil to achieve controlled drug release, enhance solubility, and reduce dosing frequency to improve patient adherence to therapy for hypertension. Urapidil was formulated into nanoparticles via the ionic-gelation method using Chitosan as a polymer, Sodium tripolyphosphate as a cross-linking agent, and filled into hard gelatin capsules after lyophilization. Pre-formulation studies, including melting point analysis and determination of the …
Published in International Journal of Biomedical Innovations and Engineering · Vol. 2, Issue 1, 2024 · pp. 43–51 Read article
-
Comprehensive Evaluation of Quercetin from Bauhinia purpurea for Its Anti-Acne and Anti-Inflammatory Potential, Including Advances in Quercetin-Loaded Nanogel Formulation
Abstract: Acne vulgaris is among the most prevalent chronic inflammatory dermatoses in clinical dermatology, afflicting a substantial proportion of the global adolescent and adult population. Conventional pharmacotherapies — including topical retinoids, benzoyl peroxide, and systemic antibiotics — remain the therapeutic mainstay; however, their long-term utility is progressively undermined by adverse cutaneous reactions, systemic toxicity, and the rising prevalence of antibiotic-resistant Cutibacterium acnes strains. These limitations have intensified scientific interest in plant-derived …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 2, 2026 · pp. 34–46 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Polymer–Gel Composite Phase Change Materials: A Functional Polymer Composite Approach for Solar-Thermal Energy Storage in Building Facades
Abstract: This study investigates polymer–composite phase change materials (PCMs) in the form of polymer–gel hybrids as multifunctional systems for solar–thermal energy storage in building façades. Paraffin- and PEG-based PCMs were embedded into polyurethane and acrylic gel matrices to create shape-stabilized polymer–composites with high PCM loading (70–80 wt%). Differential Scanning Calorimetry (DSC) confirmed distinct melting/freezing transitions at ~56°C (paraffin) and ~42°C (PEG), with enthalpy values of 120–150 J/g, closely matching theoretical predictions, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 36–51 Read article