Search
95 articles for “photovoltaic effect”
-
A Review on Assembly of Solar Electric Vehicle
Abstract: In today’s world, the greenhouse effect is a big concern. Solar energy is a renewable energy source that can be used for thousands of years. In order to keep global warming below 2°C, COP21 convened the Paris Climate Conference 2015 in Paris in 2015, and nearly 190 countries pledged to collaborate on climate change issues. Solar electric vehicles emit no pollutants and are environmentally friendly. Solar energy is a renewable …
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 1, 2022 · pp. 28–31 Read article
-
Degradation in Energy Yield of Solar Photovoltaic Power Plant due to Soiling Effect
Abstract: Renewable energy resources are the future of the world. Solar photovoltaic energy conversion is one such type of clean and sustainable energy resource. Solar photovoltaic power plant’s performance is directly dependent on the sun’s incoming solar radiation availability and its intensity. Solar energy conversion of photovoltaic power plants is limited by local climatic parameters such as temperature, wind, humidity, dust deposition, etc. and geographical factors of latitude, longitude, etc. Accumulation …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 1, 2017 · pp. 6–11 Read article
-
Effect on Temperature and Efficiency on Photovoltaic Module of PV/T System with Water Based Optical Filter
Abstract: Solar radiation has ultraviolet, visible and infrared radiations, in which infrared and ultra-violet part of the solar radiation are mainly responsible for the heating of solar cell. This decreases the efficiency of the solar cell by –0.3 to –0.5% K-1. When we increase the concentration on the solar cell then the heat becomes more prominent and causes the damage of the solar cell, and also decreases the efficiency of solar …
Published in Journal of Electronic Design Technology · Vol. 8, Issue 1, 2017 · pp. 1–6 Read article
-
Effect of Tilt Angle on the Performance of Solar Photovoltaic Power Plant – A Quantitative Approach
Abstract: Solar photovoltaic systems have now become integral part of Indian as well as global power systems. Rooftop and ground mounted solar systems have become very popular across India these days. The ground mounted systems produce large scale power and hence, are used for industrial applications also. This paper presents a detailed analysis of a 100-kW solar photovoltaic system with the different tilt angles taken into consideration for orientation of solar …
Published in Journal of Power Electronics and Power Systems · Vol. 14, Issue 1, 2024 · pp. 12–17 Read article
-
Fabrication of Low-Cost and High-Efficiency Crystalline Silicon Solar Cells Using Polymeric Carrier Selective Contacts
Abstract: Crystalline silicon (c-Si) solar cells are the leading choice in the photovoltaic market due to their dependability and long-term stability, but lowering production costs and increasing efficiency remain key issues. Organic semiconductors use carrier-selective contacts based on doped amorphous silicon layers and transition metal oxides to simplify and lower the production costs of efficient crystalline silicon solar cells. Polymers are rapidly being used in photovoltaics as flexible substrates, photoanode films, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 124–131 Read article
-
Mathematical Modeling of Hybrid PV- Wind Grid Connected Energy System for Improvement in Renewable Energy Applications
Abstract: Presently the world has relied upon petroleum products for energy supply. The overall utilization of non-renewable energy sources (coal, gas and oil) is as yet expanding regardless of the developing worldwide familiarity with the natural effect of non-renewable energy source utilization and of restricted petroleum derivative stores. By and by increment in the cost of oil has been a most significant wellspring of prudent issue on the planet. The creation …
Published in Trends in Electrical Engineering · Vol. 10, Issue 2, 2020 · pp. 21–32 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Cooling test's impact on photovoltaic solar panel systems
Abstract: Temperature changes have a massive effect on the performance of photovoltaic (PV) solar panels that are currently extensively used for the conversion of solar power into electrical energy. The output of solar systems is limited, especially in hot climates, as heating of the panel causes output voltage and efficiency to drop. The paper explores the effects of cooling on the quality and performance of photovoltaic (PV) solar panels. In this …
Published in International Journal of Electronics Automation · Vol. 4, Issue 2, 2026 Read article
-
Computational Modeling of Polymer Semiconductors for Electronic Applications
Abstract: Polymer semiconductors have become important materials in modern electronic applications because they combine semiconducting behavior with mechanical flexibility, low-cost processing, and tunable molecular structure. Their growing use in organic field-effect transistors, organic photovoltaics, organic light-emitting diodes, and flexible sensing devices has increased the need for accurate computational approaches that can predict material properties and device performance before experimental fabrication. This paper reviews the major computational modeling techniques used for polymer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 132–146 Read article
-
Photovoltaic Integrated Electric Vehicles Charging stations for isolated locations
Abstract: Future mobility plans of global countries focus on replacement of IC engines operated mechanism by electrically powered systems. It aims to reduce carbon footprints, improve fuel efficiency and make vehicle systems smarter. A typical electric vehicle is an integration of battery banks, charge management systems, electric motors, power electronic converters, and control mechanisms. The battery bank maintains the supply of energy for the operation of the motor which in turn …
Published in Trends in Electrical Engineering · Vol. 13, Issue 1, 2023 · pp. 1–11 Read article
-
Battery-Less Cost Effective Photo-Voltaic (PV) Smart Grid Scheme of Leading University, Bangladesh
Abstract: This research paper deals with the design and simulation of a cost effective, facile and robust smart photovoltaic system for Leading University Campus, Sylhet, Bangladesh. All electrical loads have been calculated from electrical layout design using AutoCAD. Selected essential loads have also been calculated which is required for redundancy of whole electrical system. Different parameters like power consumption demands, size of the PV modules, inverter sizing, battery sizing, solar charge …
Published in Journal of Power Electronics and Power Systems · Vol. 11, Issue 1, 2021 · pp. 38–48 Read article
-
Accumulation of Energy from Roads
Abstract: The technique of extracting energy through foreign factors is associated with energy harvesting (also termed as power harvesting, energy scavenging, or ambient power). These external sources can be characterised as solar radiation, energetic particles, hydroelectricity, salinity gradient, and change in momentum, often known as ambient energy caught, and preserved using smart materials as transducers, wireless autonomous devices, like those used in wearable electronics and wireless sensor networks. These minerals are …
Published in Trends in Electrical Engineering · Vol. 12, Issue 2, 2022 · pp. 7–12 Read article
-
A Review on Life Cycle Assessment of Solar Photovoltaic Electricity Generation Systems
Abstract: A popular system for calculating the environmental effects of energy systems from conception to death is life cycle assessment, or LCA. As a low-carbon generation technology, solar photovoltaic (PV) systems have fast spread throughout the world. The various PV technologies (monocrystalline, polycrystalline, thin-film), system scales (residential, commercial, utility), industrial locations, balance of system (BOS) configurations, and end-of-life (EoL) scenarios are all covered in this review of published life cycle assessment …
Published in Journal of Control & Instrumentation · Vol. 17, Issue 1, 2026 · pp. 1–6 Read article
-
Experimental Investigation on the Performance of Photovoltaic Panel with and Without Phase Change Material Heat Sink
Abstract: AbstractThe future of solar energy conversion into electricity is one of the recognized classes of technology seeing that abundance of a free and clean source of energy in almost every part of continents. The effect of exceeding in temperature on Photovoltaic (PV) cells remains one of the major disadvantages of this technology. In order to improve the power utilization of the PV panel, it is necessary to maintain cell temperature …
Published in Journal of Thermal Engineering and Applications · Vol. 7, Issue 2, 2020 · pp. 15–23 Read article
-
Modeling of Photovoltaic Module with MATLAB/Simulink
Abstract: Abstract The generation of electrical energy from sunlight is achieved with an interface called photovoltaic (PV) module. The PV module plays a vital role for extracting electrical energy from sunlight, thus its accuracy is most important parameter for consideration while developing mathematical model of PV module. For higher accuracy the single diode model with series and parallel resistors combination is used. For simulating this device in MATLAB/Simulink we need weather …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 1, 2019 · pp. 38–45 Read article
-
Development and Performance Evaluation of GO–ZnO/PU Hybrid Nanocomposite Coatings for Improved Optical Transmission, Cooling, and Self-Cleaning in PV Systems
Abstract: The performance of solar photovoltaic (PV) modules with time is affected by thermal heating, dust buildup, and exposure to ultraviolet (UV) light; as a result, the power loss increases rapidly during the use condition. In this study, a polyurethane (PU) nanocomposite, fabricated with graphene oxide and zinc oxide (GO–ZnO), is invented and examined. Improvements in heat management, light transmission, and dirt resistance are planned for PV glass surfaces. The nanocomposite …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 243–249 Read article
-
Impact of Different Parameters on Photovoltaic Cells - A Study
Abstract: The objective of this study is to find out the impact of different parameters along with effect of environmental conditions on the electrical power generation by PV cells. Photovoltaic is playing an important role to make use of solar energy for electricity generation worldwide. In this study progress in solar photovoltaic technologies including materials for solar cells, efficiency; factor affecting the performance like solar irradiance, accumulation of dust, humidity and …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 8, Issue 3, 2018 · pp. 14–21 Read article
-
Integration of Nanotechnology in Electric Vehical Technology: A Comprehensive Review
Abstract: The integration of nanotechnology in electric vehicles (EVs) heralds significant advancements in energy storage, efficiency, and overall vehicle performance. This paper explores the current state and future potential of nanotechnology applications in EVs, focusing on battery technology, lightweight materials, and energy conversion systems. In battery technology, nanostructured anodes and cathodes, such as silicon nanowires and lithium iron phosphate nanoparticles, enhance energy density and charging rates. Solid-state electrolytes with nanocomposite materials …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 1, 2024 · pp. 29–34 Read article
-
Bismuth-Doped CuGaS₂ Thin Films for Enhanced Photovoltaic and Electrocatalytic Performance
Abstract: This study presents the development and application of bismuth (Bi)-doped CuGaS₂ thin films for enhanced performance in photovoltaic and electrocatalytic systems. Using a cost-effective all-solution processing method, Bi-doped CuGaS₂ chalcopyrite nanocrystals were synthesized and spray-deposited onto molybdenum substrates. The resulting films, with a thickness of approximately 730 nm and grain sizes larger than 400 nm, exhibited superior optical properties and a lower band gap compared to undoped films, making them …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 01–07 Read article
-
PV-Syst based Performance Forecasting of Grid Connected Solar PV System in Indian Scenario
Abstract: The presentation and economy of a solar photovoltaic framework relies upon area and geographic parameters. Anticipating energy productivity is significant for effective arranging and assessment rates. The proposed examination investigates the exhibition assessment of three interconnected geologically associated photovoltaic solar frameworks. In Jaipur, Kolkata and Chennai have been trying a 1 MW solar PV framework for a year. Recreations were performed utilizing PV Syst (a product device created by the …
Published in Trends in Electrical Engineering · Vol. 10, Issue 2, 2020 · pp. 33–39 Read article