Search
27 articles for “number of pulses”
-
Number of Laser Pulses Influence on Optical Properties of Pulse Laser Deposited ZnS Thin Films
Abstract: In present work four samples of ZnS thin films deposited on glass substrate using pulse laser deposition method with different number of laser pulses, the effect of the number of laser pulses on the optical properties of ZnS thin films was studied. Q-Switched Nd: YAG laser with the fundamental wavelength 1064 nm, laser pulse energy of 100 mj with fixed pulse repetition rate of 2 Hz were used, and varied …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 1–9 Read article
-
ULTRAFAST LASERS AND ITS USE IN ELECTRONICS INDUSTRY
Abstract: The size of semiconductors and packaged devices continues to shrink enabling the devices to become more compact . This trend requires the deployment of sophisticated equipments with inbuilt lasers that have unique capability to process diverse materials with high precision , but without damaging the electronic components due to heat . There are diverse laser technologies utilising longer pulse width or ultrashort pulse (USP) width that are employed in electronic …
Published in Journal of Semiconductor Devices and Circuits · Vol. 8, Issue 2, 2021 · pp. 34–45 Read article
-
Strength Assessment of RCC Beams Subjected to Corrosion
Abstract: The damage assessment of civil structural members is one of the most important and recently emerging fields in engineering. Deterioration of a structure may occur due to a host of factors such as poor workmanship, improper maintenance, atmospheric effects, accidents, natural calamities. Certain causes like environmental effects, natural calamities cannot be controlled. Therefore, durability of concrete structures especially those exposed to aggressive environments is of great concern. Many deterioration causes …
Published in Recent Trends in Civil Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 139–152 Read article
-
A Transformer-based Multilevel Inverter with Lesser Components
Abstract: This paper presents a multilevel inverter topology with lesser number of components than a conventional multilevel inverter, thereby reducing the overall cost of the same. Here, a nine-level transformer-based multilevel inverter topology is proposed which uses only 8 switches while a conventional transformer-less multilevel inverter uses 16 switches for achieving the same voltage level. The structure consists of a single dc source feeding two standard H-bridges. The process of intermediate …
Published in Journal of Microelectronics and Solid State Devices · Vol. 6, Issue 2, 2019 · pp. 1–12 Read article
-
Performance Evaluation of Single Phase Cascaded Nine Level Inverter using Photovoltaic (PV) SystemPerformance Evaluation of Single Phase Cascaded Nine Level Inverter using Photovoltaic (PV) System
Abstract: Multilevel inverters are considered at present as the state of the art power conversion systems for high power and power quality demanding applications. This paper’s objective is to propose a modified cascaded nine-level inverter topology for a virtually sinusoidal output voltage, less number of power switches, results in decreased complexity and reduced total harmonic distortion (THD). The structure is simple and easy to be extended to higher level but also …
Published in Trends in Electrical Engineering · Vol. 8, Issue 1, 2018 · pp. 30–47 Read article
-
Performance of Offshore Steel Jacket Platforms under Near-source Ground Motion Type Pulses
Abstract: Behaviour of jacket type offshore structures under ordinary ground excitations has already been addressed by a number of researchers. However, their performance under near-source ground excitations has not been particularly addressed in the literature. Records from recent earthquakes, such as the Kobe Japan (1995) and Chi-Chi Taiwan (1999), have revealed that the dynamic excitations in near-source are dominated by a large, narrow band and long period pulse caused by rupture …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 2, 2014 · pp. 17–31 Read article
-
Analysis of Cascaded Multilevel Inverter Induction Motor Drives
Abstract: The goal of this thesis is to use harmonic analysis to learn more about the performance of various cascaded multilevel inverters. To handle the high power demands of large electric drives and utility applications, innovative power electronics converters are required. As a result, in high power and medium voltage conditions, multiple power converter structures have been offered as an option. A multilayer converter not only achieves high power ratings, but …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 3, 2021 · pp. 22–42 Read article
-
Comparison of Symmetrical and Asymmetrical Cascaded H-Bridge Inverter with Single DC Source
Abstract: This paper presents the comparison of traditional cascaded H-bridge inverter with isolated DC sources (symmetrical arrangement) and the proposed cascaded H-bridge inverter with single DC source (asymmetrical arrangement). Also, fundamental switching strategy is used to generate the control pulses. A conventional cascaded H-bridge (CHB) inverter requires ‘n’ numbers of DC sources for 2n + 1 levels. Without requiring transformers, the scheme proposed here allows the use of a single DC …
Published in Journal of Power Electronics and Power Systems · Vol. 2, Issue 1, 2012 · pp. 8–17 Read article
-
Optimization of Machining Parameters of EN-27 Material Using Wire Electric Discharge Machining (WEDM)
Abstract: The optimization of Wire Electrical Discharge Machining (WEDM) parameters for EN-27 alloy steel, a high-strength material widely utilized in mechanical and structural applications, is the subject of this study's methodical analysis. Due to its hardness and poor machinability by conventional methods, WEDM is preferred for achieving precise dimensional accuracy and surface integrity. The primary objective of this work is to enhance machining performance by identifying optimal process parameters influencing Material …
Published in Journal of Production Research & Management · Vol. 16, Issue 1, 2026 · pp. 32–36 Read article
-
Performance Study of Parabolically versus Exponentially Tapered Multimode Interference Coupler
Abstract: ABSTRACT This paper shows mainly the performance study on tapered section of Multimode Interference (MMI) coupler having either parabolic or exponential taper section. The comparative study of the 1 × 2 MMI coupler with proposed structure, such as the normalized width variation, and variation of MMI length are investigated by the 2D finite difference beam propagation method (BPM). We have found that exponential tapered MMI coupler has advantageous compared to …
Published in Trends in Opto-electro & Optical Communication · Vol. 2, Issue 2, 2012 · pp. 8–17 Read article
-
Durability and Non Destructive Test of Hybrid Fibre Reinforced Concrete
Abstract: AbstractAim: This paper presents the strength and performances of steel fibre reinforced concrete (SFRC) and hybrid fibre reinforced concrete (HFRC). The hybrid fibre is considered in the combination of hooked end steel fibres and polypropylenes fibres. Method: To study the durability properties, the fibre content dosage V f ranged from 0.5 to 2.0% of steel fibres, and 0.8SF0.3PP, 0.7SF0.3PP, 0.6SF0.4PP, 0.5SF0.5PP of hybrid fibres. 10 mixes including one control mix …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 31–45 Read article
-
Transient Analysis of a Grid-Connected Hybrid Wind-PV System
Abstract: A new reliable hybrid distributed generation (DG) system based on photovoltaic (PV) and wind driven permanent magnet synchronous generator (PMSG) as sources, with only a boost converter followed by an inverter stage is being developed. The proposed hybrid generator has a PV array being directly connected to the dc link instead of a dc-dc converter. The dc-dc converter varies the dc-link voltage and is placed in between the rectifier fed …
Published in Journal of Power Electronics and Power Systems · Vol. 6, Issue 2, 2016 · pp. 55–63 Read article
-
Establishing Empirical Relationships to Predict Grain Size and Hardness of Pulsed Current Microplasma Arc Welded Inconel 625 Sheets
Abstract: Nickel alloys have gathered wide acceptance in the fabrication of components, which require high temperature resistance and corrosion resistance, such as metallic bellows used in expansion joints in aircraft, aerospace and petroleum industry. In case of single pass welding of thinner sections of this alloy, pulsed current microplasma arc welding was found beneficial due to its advantages over the conventional continuous current process. The paper focuses on developing mathematical models …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 37–47 Read article
-
Review paper on Design and Development of Miniature Moving Magnet Pulse Tube Cryocooler
Abstract: Developing a miniature moving magnet pulse tube cryocooler to address the limitations in existing cryocooler technologies, especially in terms of compactness, lightweight design, durability, and maintenance-free operation, aligns with the demands of modern applications, particularly in space and similar environments. Integrating a miniature compressor and motor is essential for the functionality of the cryocooler. The design should prioritize efficiency and reliability while addressing challenges related to vibrations and maintenance commonly …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 194–205 Read article
-
Optimization of Process Parameters in EDM Machine with AISI 304 Stainless Steel using TOPSIS
Abstract: The effective solution based on TOPSIS approach to determine the optimal process parameters in die sinking electrical discharge machining. Taguchi L9 orthogonal array is used to gather information regarding the process with less number of experimental runs. Experiments have been conducted using three process parameters such as peak current, gap voltage, pulse on time, with three levels are selected to optimize the multiple objectives. AISI 304 stainless steel as a …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 3, 2016 · pp. 33–38 Read article
-
A New Nine Level Hybrid Multilevel Inverter
Abstract: Multilevel inverters (MLI’s) have been used widely for high power and medium power DC-AC conversion. Researchers are working to reduce total effective cost and enhance the working efficiency of the multilevel inverter. This paper presents a new multilevel hybrid inverter which utilizes eight active powers electronics switches along with asymmetric DC voltage source configuration to synthesize 9-level waveform and produces lower total harmonic distortion (THD) profile comparisons to present typical …
Published in Trends in Electrical Engineering · Vol. 6, Issue 1, 2016 · pp. 17–25 Read article
-
A PWM Based Series Compensator for Power System Performance Enhancement
Abstract: Enhancement of power system stability through a relatively new FACTS device named pulse width modulated series compensator (PWMSC) in the transmission line has been investigated in this article. The three-phase PWMSC is realized with a simple pulse width modulated (PWM) AC link converter consisting of four force-commutated switches and a three-phase diode bridge. The PWMSC is modeled as a continuously controllable series capacitive reactance in the transmission line of a …
Published in Journal of Power Electronics and Power Systems · Vol. 6, Issue 1, 2016 · pp. 12–25 Read article
-
Effect of Cell Carrier Loading on Phenol Degradation in Association with Production of Exopolymeric Substances and Biofilm Characteristics during Start up and Steady State in a Pulsed Plate Bioreactor
Abstract: Biodegradation of phenol in a continuous pulsed plate bioreactor (PPBR) using immobilized bacterial cells has been shown to be a highly efficient process. The present paper reports the studies on the effect physical characteristics of biofilm (biofilm thickness, attached dry biomass and biofilm dry density) and chemical characteristics in terms of exopolymers viz. protein, carbohydrate and humic substance produced by Pseudomonas desmolyticum (NCIM 2112) bacterial cells immobilized on granular activated …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 24–30 Read article
-
Single-Phase Two-Stage Multi-Level Inverter Employing Low Number of Switching Devices
Abstract: In recent years, multilevel inverter (MLI) plays a significant role in low or medium voltage applications as a result of generating voltage with reduced harmonic contents. This paper proposes a new version of multi-level inverters (MLI) with reduced switching devices along with reduced harmonics content of output voltage, which results in low switching losses compared with conventional MLI topologies. In addition, the proposed inverter provides low total blocked voltage compared …
Published in Journal of Power Electronics and Power Systems · Vol. 9, Issue 2, 2019 · pp. 22–32 Read article
-
Smart Accident Avoidance System based on Alcohol and Heartbeat Detection
Abstract: AbstractIn our project, we are introducing a new smart system that will detect drunken persons and abnormal condition persons by alcohol sensor and heartbeat sensor. GSM system is used to send a message to the police station and relevant numbers for immediate action. GPS based system is used here to track those cars. Alcohol sensor detects the drunken persons before the ignition of the car, the car’s ignition will immediately …
Published in Journal of Computer Technology & Applications · Vol. 10, Issue 2, 2019 · pp. 27–31 Read article