Search
246 articles for “low density”
-
Production of Floor Tile Using Recycle Low Density Polyethylene And Groundnut Shell as a Filler
Abstract: The production of flow tile using recycled low density polyethylene and groundnut shell as filler with the particle size of 120µm was carried out in this project . 10 pphr of all the fillers were weighed and mixed with recycled low density polyethylene on two roll mill machines. The result on this work showed that on FTIR five functional groups were identified and they are; OH, C-H, CH2/CH3, C-O, C=H. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 1, 2024 Read article
-
STUDIES ON MECHANICAL, OPTICAL AND BARRIER PROPERTIES OF LOW DENSITY POLY ETHYLENE WITH MICRO CLAY
Abstract: LDPE (Low density Poly ethylene) was melt blended with micro clay (0.5, 1, 3 & 5 wt%) by using a twin screw compounding extruder. Tubular blown film was taken using a tubular blown film extruder. Mechanical, optical and barrier properties were evaluated. The following trend was observed as the micro clay concentration was increased: The tensile strength was increased by 18% in machine direction (M/D) and decreased by 36% in …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 23–31 Read article
-
Hybrid effect of nanoperlite and nanoclay on mechanical and rheological properties of low-density polyethylene
Abstract: The effect of two kinds of nanomaterials, nanoclay (NC) and nanoperlite (NP) was studied on morphological, rheological, mechanical and dynamic-mechanical properties of low-density poly ethylene (LDPE). It was found that hybrid nanofiller dispersion in LDPE depended on the type (hybrid or individual form) and in higher extent also on the amount of the nanofiller incorporated. Rheological results revealed that storage modulus and complex viscosity of hybrid nanofiller-filled LDPE nanocomposites increased …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 32–41 Read article
-
Low density polyurethane based antistatic coating for PU flexible foam for launch vehicles
Abstract: Polyurethane (PU) is a multi functional polymer prepared by using more than two types of monomers. The unique properties of PU come from monomers, thus broadening the applicability of PU in many different sectors. Furthermore, the antistatic property of PU coatings can be improved by the addition of conductive fillers into matrix thus broadening its application in the manufacture of electronic products, aerospace systems and daily necessities and so on. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 25–30 Read article
-
Biodisintegrable Low-Density Polyethylene (LDPE)/Sago Starch (SS) Composites for Food Packaging Applications
Abstract: Research scientists are very interested in polysaccharide-filled plastics as a way to create a biodisintegrable polymer composite. The goal of the current study is to employ SS to create a biodisintegrable polymer composite, which could pave the way for a more user-friendly polymer composite in the future. In this study, LDPE/SS biodisintegrable composites were created by physically blending SS and LDPE in a Brabender mixer. The effects of varying the …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 3, 2022 · pp. 1–12 Read article
-
Lipid Profile Analysis in Type 2 Diabetes Mellitus Patients Belonging to Kota South
Abstract: Background: Diabetes mellitus is a category of metabolic disorders marked by persistently high blood sugar levels and abnormalities in the metabolism of fats, proteins, and carbohydrates as a result of deficiencies in the secretion or action of insulin, or both. Diabetic dyslipidemia is characterized by elevated low-density lipoprotein cholesterol (LDL-C), reduced high-density lipoprotein cholesterol (HDL-C), and increased triglyceride (TG) levels. The objective of this study is to assess the lipid …
Published in Research and Reviews : A Journal of Immunology · Vol. 13, Issue 2, 2023 · pp. 38–41 Read article
-
Various Methods For Plastic Waste Pyrolysis To Fuels: A Review
Abstract: The world's decreasing oil reserves and increasing energy demands are pushing experts to explore alternative ways of producing premium oils that can replace fossil fuels. Waste-to-energy recovery, which involves converting waste materials into energy, shows great potential for managing waste. Waste plastics, abundant and with a high combustion heat, are attractive for energy conversion. However, the vast use of plastic products, both industrially and domestically, leads to a surge in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 79–93 Read article
-
Halloysite nanotubes – A novel reinforcing material for future applications
Abstract: The distinctive nano materials such as nano powder, nano fluids, nano tubes, nano rods, nano particles, nano fibres and so forth are used in the field of nanotechnology. These nano materials are toxic in nature so not viewed as safe for people and for nature too. Halloysite nano tubes (HNT) are eco-friendly, naturally occurring cheaply available kaolinite group mineral. HNT incorporated materials have good in strength, thermal resistance and freely …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 34–40 Read article
-
Review of Atorvastatin As A Potent Drug For Cardio-Vascular Disease(CVD)
Abstract: Cardiovascular disease (CVD), particularly atherosclerosis, remains the leading cause of death worldwide, significantly burdening public health, especially in Western societies. Metabolic syndrome and arrhythmic complications further exacerbate cardiovascular morbidity and mortality. Among restorative specialists, statins particularly atorvastatin have gotten to central in both the essential and auxiliary anticipation of coronary heart infection (CHD) due to their strong lipid-lowering properties and additional pleiotropic impacts. Atorvastatin, a selective HMG-CoA reductase inhibitor, not …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 12, Issue 3, 2025 · pp. 8–18 Read article
-
A Review on utilizing waste Polyethylene Terephthalate in composite bituminous mixes
Abstract: Rapid ascend in population growth has led to a corresponding rise in annual Polyethylene Terephthalate waste and others Polymers production. This underscores the urgent necessity to reuse discarded polymers like Polyethylene Terephthalate, Poly Vinyl Acetate, Low Density Polyethylene etc. When discarded polymers isn't recycled, it typically finds its way into landfills, contributes to oceanic garbage patches, or undergoes incineration, each of which poses distinct environmental challenges. Moreover, controlling pollution from …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 10–17 Read article
-
Preparation and Characterization of Polyolefins/Inorganic Nano-Filler Nanocomposites via Melt Extrusion Process
Abstract: This work used the melt-mixing method followed by compression molding to create nanocomposites of polyolefins, such as high-density polyethylene and linear low-density polyethylene, packed with both surface-modified and unmodified nano-calcite. The study examined the effects of varying concentrations of nano-calcite, which had been modified using isopropyl tri-(dioctylpyrophosphato) titanate, on the mechanical properties, morphological characteristics, and flow behavior of the resulting nanocomposites. A corotational twin-screw extruder was utilized to manufacture three …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 3, 2024 · pp. 35–43 Read article
-
Wear Characteristics of Aluminium-Graphite Composites Produced by Stir Casting Technique
Abstract: Metal matrix composites (MMCs) are finding more applications due to their significantly improved properties such as high specific strength, high specific modulus, good damping capacity and good wear resistance compared to unreinforced alloys. In recent years, there has been an increasing interest in composites containing low density and low cost reinforcements. Graphite is one of the most suitable and low density reinforcement available for making light-weight and wear resistant parts …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 13–20 Read article
-
Dyslipidaemia and its Association with Fasting versus Non Fasting Lipid Profile Values
Abstract: Lipid profile is a panel of blood tests used as a screening tool for dyslipidaemia. Dyslipidaemia is defined as disturbances of cholesterol and triglyceride levels and recognized as risk factor for cardiovascular diseases. It includes total cholesterol, low density lipoproteins (LDL), high density lipoproteins (HDL), very low density lipoproteins (VLDL) and triglycerides. This study assesses the prevalence of dyslipidaemia among apparently healthy individuals in physically fit defence service personnel and …
Published in Research and Reviews: A Journal of Medicine · Vol. 10, Issue 2, 2020 · pp. 26–31 Read article
-
A Novel Technique for Improved Recovery of Mg-Analysis of the Microstructure and Physical Properties
Abstract: Aluminium-Magnesium alloys are used widely in industrial applications as well as for the preparation of metal matrix composite because of their low density and high specific strength. Magnesium has a low boiling point and the recovery of magnesium is poor when it is added in pure form particularly as cheaply available turnings to the liquid metal. Magnesium is added to aluminium for increasing its wettability and thus helping in uniformly …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 1, 2013 · pp. 1–7 Read article
-
A Comparative Study of Lipid Profile in Pre-Dialysis and Post-Dialysis End-Stage Renal Disease Patients
Abstract: Background: Chronic kidney disease (CKD) represents a major public health concern in India, with its prevalence increasing at an alarming rate. Individuals with CKD are at a substantially higher risk of developing cardiovascular disease (CVD), which remains the leading cause of mortality in this population. Dyslipidemia is particularly pronounced among patients with end-stage renal disease (ESRD); however, limited data are available regarding the impact of hemodialysis on lipid profile alterations. …
Published in Research and Reviews: A Journal of Medicine · Vol. 16, Issue 1, 2026 · pp. 25–31 Read article
-
Nanocomposites of Polyethylene-Closite 20A: Preparation and Characteristics
Abstract: Low-density polyethylene/closite 20A nanocomposites with different organoclay contents were made in the current study by a melt mixing technique with two different compatibilizers of varying contents: low molecular weight oxidized polyethylene and low molecular weight trimethoxysilyl modified polybutadiene. The inclusion of compatibilizers and concentrations of organoclay were analyzed in relation to the mechanical and thermal properties of the nanocomposites. The dispersibility of the silicate clay in the nanocomposites was investigated …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 1, 2025 · pp. 01–12 Read article
-
Biodegradation of Plastic Waste Using Various Fungal Isolates from Plastic-Polluted Sites in Meerut: Analysis of Polymers and Composites
Abstract: By isolating microorganisms from a dumpsite containing low-density polyethylene (LDPE), the potential for microbial decomposition of plastic waste was studied. Four different strains of Aspergillus niger (fungus) were identified and used to biodegrade plastic waste. The isolated fungal strains included Aspergillus niger, Alternaria, A. fumigatus, A. flavus, and A. luchuensis. Predominant fungal strains, Aspergillus niger and Alternaria, were selected for polyethylene degradation under laboratory conditions. In a controlled shaker culture, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 184–197 Read article
-
Development and Evaluation of Physical and Mechanical Properties on Talc Filled Sisal/Polyester Composites
Abstract: In recent years, research focusing on the use of natural fiber-reinforced composites has been increased and has opened up further industrial possibilities due to advantages of low density, low cost, biodegradability, abundance and renewability proffered by natural fibers. In this research, randomly oriented sisal fiber and talc filler were used to reinforce polyester matrix to produce composites of 3 mm thickness. The composites were fabricated by hand laying technique. Composite …
Published in Emerging Trends in Chemical Engineering · Vol. 5, Issue 2, 2018 · pp. 27–35 Read article
-
Numerical Prediction of Shear Modulus of Multi-Layer PUF Cored Sandwich Composites
Abstract: The present numerical investigation was mainly concerned with the evaluation of apparent shear modulus (Gc) of multi-layered polyurethane foam cored sandwich beams using a novel approach through the medium of general purpose program i.e. FEM/ANSYS. Aiming to the goal, three-point bending analysis was performed on sandwich beam models made up of composite face sheets and multi-layer polyurethane foam cores of different layer densities. Finite element models of sandwich beams were …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 53–61 Read article
-
Screening of Obesity and its Associated Biochemical Markers in North Indian Population
Abstract: The aim of the present study was to explore out the prevalence of biochemical markers, and their connection with obesity in north Indian population. The sample size was 300, between the ages of 10 and 60 years old from all the ethics of north India. The obesity was calculated by body mass index based on the World Health Organization standard. We collected venous blood for biochemical markers investigation (total cholesterol, …
Published in Research and Reviews: A Journal of Health Professions · Vol. 8, Issue 3, 2018 · pp. 51–54 Read article