Search
20 articles for “fumes”
-
Performance of Sisal Fiber Concrete Using Fly Ash and Silica Fume Enhancements
Abstract: The construction industry has advanced significantly in constructing innovative structures using diverse materials. Various waste materials such as fly ash, sawdust, and residues of natural fibers have been utilized in the construction industry. Addressing these concerns requires exploring low-cost, environmentally friendly, and sustainable materials. This paper aims to investigate mixing silica fume, fly ash, and sisal fiber into concrete to address waste disposal and global warming issues while creating stronger …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 63–74 Read article
-
Impact of Composite Materials by Silica Fume and Fly Ash in Cement and Partial Substitution of Fine Aggregate Using Quarry Dust in Steel Fibre Concrete
Abstract: Mineral admixtures can be added to concrete to replace some of the cement, increasing its overall strength. Fly ash (FA) and silica fume (SF) are two often used mineral admixtures. A series of experiments were conducted to investigate the effect of adding varied amounts of fly ash and a consistent amount of silica fume on concrete strength by using the same amount of substitute for cement and the same water-binder …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 139–147 Read article
-
Evaluation of Compressive Strength of Concrete Using Fly Ash, Silica Fume, and Steel Slag as Cementitious and Aggregate Replacements
Abstract: This study comprehensively investigates the influence of supplementary cementitious materials and industrial by-products—specifically fly ash, silica fume, and steel slag—on the compressive strength of concrete. The primary objective is to evaluate the impact of both individual and combined replacements of cement and aggregate components on concrete performance. The research analyzes how varying proportions of these materials affect the strength characteristics of the concrete mixtures. Experimental results demonstrate that increasing the …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article
-
Hybrid Polymer Composites Reinforced with Coconut Shell Fillers and Silica Fume: Synergistic Effects of Industrial By-Products : A Comprehensive Review
Abstract: The increasing requirement of sustainable and high-performance engineering materials has led to increased research in hybrid polymer composites comprising sustainable fillers in the form of renewable biomass or industrial by-products. Among the various bio-fillers that exist, coconut shell filler is gaining much prominence due to its low density, high content of lignin, hardness, and abundance as agricultural waste. Another industrial by-product that is rich in amorphous silica and possesses high …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Enhancing Concrete Performance Through Ternary Mixtures: Utilizing SCBA and Silica Fume for Sustainable Construction
Abstract: This study investigates the effects of incorporating Sugarcane Bagasse Ash (SCBA) and Silica Fume (SF) as supplementary cementitious materials on the properties of concrete. Compressive strength, split tensile strength, and water absorption characteristics of ternary blended concrete mixes containing varying proportions of SCBA and SF were examined at curing periods of 7, 28, and 56 days. The results reveal that up to 15% SCBA replacement and 10% SF addition led …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 1, 2024 · pp. 6–12 Read article
-
Performance Evaluation of Modified Concrete Incorporating Fly Ash, Silica Fume, Rice Husk Ash, and Calcium Nitrate
Abstract: The growing demand for sustainable and high-performance concrete has led to the incorporation of supplementary cementitious materials (SCMs) and chemical admixtures to enhance mechanical and durability properties. This study investigates the effect of 15% fly ash, 10% silica fume, 10% rice husk ash, and 3% calcium nitrate as a partial replacement for cement in M25 and M30 grade concrete. Experimental results demonstrate that the modified concrete exhibited an increase in …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 35–39 Read article
-
Effect of Silica Fume on the Engineering Properties of Fly Ash-Based Geopolymer Concrete Using 100% Recycled Concrete Aggregate
Abstract: Construction and demolition (C&D) waste has generated an enormous amount in developing countries like India due to explosive infrastructures and increasing urbanization, causing numerous concerns regarding the environment and economy. Recycling of aggregate from C&D debris is a beneficial approach to sustainable development and a circular economy. In contrast, numerous drawbacks of the integration of recycled concrete aggregates are due to adhered mortar remaining on their surfaces, reducing the strength …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1316–1325 Read article
-
Performance Evaluation of Concrete with Binary and Ternary Blends of Fly Ash, Silica Fume, and Fiber Reinforcement
Abstract: This study evaluates the effect of ground granulated blast furnace slag (GGBS) as a partial replacement for cement on the mechanical properties of concrete, focusing on compressive and split tensile strength. Concrete mixes were prepared with GGBS replacement levels of 0%, 25%, and 50% and subjected to different curing methods, including water curing, steam curing, and conceal curing. These curing methods were selected to investigate their impact on hydration, strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 40–45 Read article
-
Influence of Cementitious and Aggregate Replacements on the Compressive Strength of Pervious Concrete
Abstract: Pervious concrete is a sustainable construction material designed to enhance stormwater management while maintaining adequate mechanical strength. This study investigates the compressive strength of pervious concrete cubes with various cementitious and coarse aggregate replacements. The research examines the effects of fly ash, silica fume, steel slag, and rubber chips on compressive strength at 7 and 28 days of curing. The results indicate that moderate fly ash replacement enhances compressive strength, …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 9–14 Read article
-
From Waste to Strength: Hybrid Binder Approach for Sustainable M25 Concrete
Abstract: The growing demand for concrete in infrastructure development has led to increased cement consumption, raising serious environmental concerns due to high energy use and carbon dioxide emissions correlated with cement manufacturing. In this context, the use of industrial residues as partial substitutions for cement has achieved deep focus as a sustainable construction strategy. The current investigations experimentally explore the strength and quality performance of concrete produced using a hybrid binder …
Published in Journal of Construction Engineering, Technology & Management · Vol. 16, Issue 1, 2026 · pp. 24–32 Read article
-
Influence of Supplementary Cementitious Materials on Chemical Shrinkage in Cement
Abstract: Chemical shrinkage is the volume reduction observed in cement during early hydration due to chemical reactions, which critically influences the internal stresses, cracking tendencies, and durability of cementitious system. Present study is focused on effect of supplementary cementitious material (SCM) on chemical shrinkage. Dilatometry method is used to assess the impacts of SCMs on chemical shrinkage, in this this study. The research incorporates experiments with laboratory-synthesized cement and three SCMs—fly …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 98–107 Read article
-
Durability Assessment of Self Compacting, Self Curing Concrete Incorporating Crushed Rock Powder and Mineral Admixtures
Abstract: Curing plays a crucial role in achieving the desired strength, characteristics, and durability of concrete. Negligent curing practices can lead to adverse effects on hydration and mechanical properties of concrete. In recent times, self-curing concrete has gained significant attention due to its potential in reducing water loss through the use of self-curing agents. The Present Research study focus on investigation on durability characteristics of self-curing self-compacting concrete using crushed rock …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 25–35 Read article
-
Exploring High-Strength Self-Compacting Concrete: An Investigative Study
Abstract: Presently, Self-Compacting Concrete (SCC) emerges as a cutting-edge variant within the concrete landscape. This type of concrete opens a new horizon in construction industries, as the concrete may flow on its own weight and does not require external vibration for compaction. For this reason, it reduces the labor costs, energy, and time required for placement It has the capability to smoothly spread into the intricate spaces of the formwork and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 20–28 Read article
-
Geopolymer Concrete Composites and its Properties- A Clean and Sustainable Development
Abstract: Production of geopolymer composites, an inventive and environmentally friendly substitute for regular Portland cement concrete, involves the polymerization of several industrial waste materials, including fly ash, powdered granulated blast furnace slag, silica fume, and rice husk ash, using solutions that are very alkaline. Because this technique removes the requirement for calcination, which is a significant contributor of CO2 emissions during the manufacturing of OPC, GPC is more ecologically friendly. Alkaline …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 284–300 Read article
-
Chemical Treatment Methods for Types of Chemical and Environmental Pollution: Review
Abstract: Developed countries have witnessed the industrial revolution and technological advancements, as a result, environmental pollution is steadily increasing, negatively impacting living organisms and life sources. The causes are well known, as are the solutions, but major industrialized nations are procrastinating and postponing implementation of solutions because it reduces their profits. To address chemical pollution: reducing the use of nuclear energy, disposing of chemical waste in proper ways, and focusing on …
Published in Journal of Water Resource Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 53–60 Read article
-
A Comprehensive Review of Concrete Containing Magnetically Treated Water
Abstract: In Present scenario, Construction has benefited greatly from the characteristics of concrete and the magnetism of water. The procedure of permitting water to pass through the magnetic field is part of creating magnetised water, utilizing those properties of concrete that can affect such as compressive strength, workability, porosity, permeability, durability, water absorption capacity, hydration rate and aqueous ratio. Reduced cement usage and improved mechanical and technical qualities of concrete are …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 52–64 Read article
-
Service Life Enhancement: Exploring the Effects of Supplementary Cementitious Materials on RC Structures in Marine and Urban Contexts
Abstract: Reinforced concrete (RC) structures stand as the cornerstone of modern construction due to their cost-effectiveness and widespread availability. The most predeterminant factor for the deterioration of RC structure is due to the corrosion of reinforcement. This review paper comprehensively explores the occurrence and degradation mechanism of reinforced concrete (RC) structures when exposed to adverse environmental conditions, i.e., marine, or urban environments. Corrosion of reinforcement takes place when RC structures are …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 247–258 Read article
-
Analyzing the Performance and the Emission Characteristics of Palladium Catalyst using different blends of Methanol Fuel and Nano Particles of Aluminium and Titanium Oxides
Abstract: The high cost and limited availability of precious metals prompted the automotive industry to explore alternative materials for improving catalytic converter performance. This research focuses on the development and optimization of catalytic converters designed to reduce exhaust emissions, ensuring compliance with market needs and regulatory standards. Specifically, it investigates the three-way catalytic converter in a four-stroke engine utilizing commonly available noble metals, particularly palladium as the catalyst. The best way …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1505–1517 Read article
-
Review on the Effects of Chemical Compounds Toxicity on Workers in Chemical Laboratories.
Abstract: Chemical laboratories are considered high-risk work environments due to the wide range of chemicals that workers handle, which may be toxic, corrosive, or flammable. Improper handling of these substances can lead to serious health problems, ranging from mild irritation to death in cases of exposure to chemical compounds such as phenols and amines, which cause various types of lung and laryngeal cancers and respiratory diseases in laboratory workers who are …
Published in International Journal of Toxins and Toxics · Vol. 3, Issue 2, 2026 · pp. 17–26 Read article