Search
215 articles for “flexure”
-
Optimization of Tensile and Flexural Properties of PETG Filament in FDM 3D Printing Using Response Surface Methodology
Abstract: Now a days manufacturing trend has been changed from subtractive to additive. In additive manufacturing (3D Printing), layer by layer deposition occurs and final product can be obtained. The main advantages of additive manufacturing is to obtain customized product, complex geometry product. This research investigates the optimization of tensile and flexural Strength of PETG filament in Fused Deposition Modeling (FDM) 3-d printing by using of Response Surface Methodology (RSM). Specimens …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 39–58 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article
-
Structure–Property Correlation of Infill Topology and Density on Tensile and Flexural Performance of FDM-Printed PLA and ABS
Abstract: Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has become a widely adopted manufacturing technology due to its design flexibility, low cost, and capability for rapid prototyping. However, the mechanical performance of FDM-printed components is strongly influenced by internal structural parameters such as infill pattern and infill density, in addition to the intrinsic material behaviour. This study investigates the structure–property relationship between infill topology, density, and mechanical performance of PLA …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 26–37 Read article
-
Flexural Strength and Drilling Parameter of Natural Fiber Composites with Usage of Epoxy Resin
Abstract: An attempt that has been made to take use of the advantages offered by natural composite materials in light of the fast advancement of research and development in this field over the course of the previous two decades, from the laboratory to the factory floor. During the manufacturing process of laminates, polymer matrices are used, while cotton, jute, and sisal are utilised as reinforcing materials. Epoxy resin is used to …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 37–45 Read article
-
Flexural Analysis of Concrete Specimens with Substantial Substitution of Cement by Marble Dust and Scrap Rubber as Fibre
Abstract: Concrete is a crucial material in building and construction. Concrete is becoming more and more in demand every day. Concrete's essential ingredients are running out, therefore we need to find replacements. In addition to providing the necessary strength to the concrete, the replacement materials should also have the properties of the genuine components used in concrete. Typically, compression is where concrete shines, whereas tension and shear are where it falters. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 95–100 Read article
-
Predictive Modeling and Optimization of Tensile and Flexural Strength in FDM 3D Printing Using Decision Trees and Bayesian Optimization.
Abstract: This research investigates predictive modelling and optimization technique for the tensile and flexural strength of PlA (Poly Lactic Acid) in Fused Deposition Modelling (FDM) 3D printing. Employing Decision Trees and Bayesian Optimization enhances comprehension and control of 3D printing process. Precise model predicts PLA material properties based on input parameters. Methodology involves rigorous data preprocessing, encompassing, cleaning, transformation, and normalization. Hyperparameter optimization via grid search systematically explores configurations, optimizing model …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 203–214 Read article
-
Investigating Flexural Behavior in Cyclic Loading of Fly Ash-Based Green Concrete
Abstract: The construction industry is increasingly embracing sustainable materials, and geopolymer concrete (GPC) has emerged as a promising eco-friendly alternative to Ordinary Portland Cement (OPC). Derived from industrial by-products such as fly ash, GPC offers significant environmental advantages by reducing greenhouse gas emissions associated with conventional cement production. This study explores the monotonic and cyclic performance of fly ash-based GPC, with a focus on its mechanical and structural behavior. Key properties, …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 1–5 Read article
-
Comparative Study of Compressive and Flexural Strength of Concrete by Partial Replacement of Cement by Nano Silica Powder in M40 Grade Concrete
Abstract: Concrete, a fundamental building material, traditionally relies on cement as a primary binder. However, the environmental and economic challenges associated with cement production have driven the search for alternative materials that can partially replace cement while maintaining or enhancing concrete's performance. This study focuses on the effects of Nano Silica Powder as a partial substitute for cement in M40 grade concrete, an advanced solution aimed at reducing the carbon footprint …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 18–25 Read article
-
Nano Positioning for Large Scanning Range for XY Mechanism
Abstract: In this study, an XY flexure stage that provides a variety of motion options while reducing incorrect motions is designed and assessed. In the flexure design, the double parallelogram flexure modules are positioned methodically and symmetrically. The performance of the flexure stage is assessed using finite element analysis, and experimental testing is performed to validate the findings. The built-in prototype of the flexure stage has dimensions of 350 mm x …
Published in Journal of Microelectronics and Solid State Devices · Vol. 12, Issue 1, 2025 · pp. 30–35 Read article
-
Performance of GFRP Bars in Flexural Members: A Comparative Study with Metal Bars Using FEA and Experimental Study
Abstract: In recent years, GFRP bars have been introduced as a replacement for metal bars as reinforcement in flexural members. This study evaluates the use of GFRP bars as the main reinforcement in flexural members such as beams through computer simulations and experimental work. A 4-meter beam from a sample structure, analyzed as per IS 875 (1987) Part 2, was considered for the study. This beam was designed considering both metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 262–267 Read article
-
Effect of Hybridization on Tensile and Flexural Strengths of Carbon, Glass and Steel Fiber Composites: A Comparative Study
Abstract: Fiber reinforced polymer composites are widely recognized for their high strength-to-weight ratio, excellent corrosion resistance, and design flexibility making them ideal for various engineering applications. Despite their numerous advantages, traditional composites possess significant limitations such as restricted mechanical performance under diverse loading conditions. To address this, hybrid fiber polymer composites are developed while enhancing material performance. In the present study, synthetic (carbon, glass) and metallic (steel) fiber reinforced composite materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 621–635 Read article
-
Effect of Steel Fibre on the Flexural Strength of Self- Compacting Concrete
Abstract: With the increase in demand in the construction industry Self-Compacting Concrete is becoming more popular due to its versatile nature of improved efficiency. But the SCC possesses some properties which makes it brittle under tensile forces. The behavior of SCC as a structural material can be improved with the addition of Steel Fibres in adequate amount. In fact, the fibre reinforcement mechanism can convert the brittle behavior of concrete into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 230–239 Read article
-
Tensile and Flexural Strength Quantification of Basalt-Reinforced Epoxy Composites Fabricated via Vacuum-Assisted Resin Transfer Molding at Varied Fiber Volume Fractions Description
Abstract: Fiber-reinforced polymer composites have been identified to possess excellent properties that render them very suitable in the aerospace, automotive, marine and renewable energy sectors. However, for the industrially scalable vacuum-assisted resin transfer molding (VARTM) process, optimization of mechanical properties of basalt epoxy composites must be achieved systematically, which means that the effect of the fibre volume fraction(VF) on the mechanical properties of the composite needs to be quantified for different …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Production of Injection Moulded Natural Fiber Reinforced Hybrid Composites and Assessment of Hybridization’s Effect on Mechanical Properties
Abstract: Over the past two decades, rising environmental awareness, public concern over waste, and stricter government regulations have encouraged companies to reduce their reliance on petroleum-based fuels and products. Consequently, there is a clear need to find sustainable, eco-friendly substitutes for the materials currently in use. This shift has renewed attention on renewable resources and sparked wider interest in advanced composites and green materials research. With this in mind, the present …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 246–271 Read article
-
Soil Stabilized Road
Abstract: This research examines the suitability of soil-stabilized roadways for light vehicular movement, offering an economical and practical alternative for areas with limited infrastructure development. Stabilizing soil involves improving its engineering properties by incorporating additives such as cement, lime, or other binding materials. Through stabilization, the treated soil can achieve a compressive strength of approximately 5 N/mm², or 500 tonnes per square meter (t/m²), which is sufficient to support loads imposed …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 38–42 Read article
-
Flexural Vibration of Non-Uniform Beam on Bi-Parametric Foundation Under Harmonic Moving Load with Non-Classical Boundary Conditions
Abstract: The dynamic response to harmonically varying moving loads of non-uniform elastic beam resting on bi-parametric foundation with non-classical boundary condition, time dependent in particular is examined in this paper. Here, the beam is considered non-uniform, with the moment of inertia and the distributed mass varying continuously along the span L as functions of the position 𝑥. In order to guarantee a more stable structure and a reduce risk of resonance, …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 28–42 Read article
-
Investigating the Functionality of Graphene Fiber Reinforced Plastic (GFRP) Laminates
Abstract: The increased adaptability and usefulness of glass-fiber reinforced polymer has led to its widespread adoption. GFRP laminates can be improved by including filler materials to improve their already impressive set of qualities. The demand for the research and development of advanced composites with enhanced properties has never been greater, and this is especially true for composites that are lightweight but have enhanced tensile and flexural qualities. An example of a …
Published in Journal of Polymer & Composites · Vol. 11, Issue 6, 2023 · pp. 1–9 Read article