Search
59 articles for “flexural design”
-
Soil Stabilized Road
Abstract: This research examines the suitability of soil-stabilized roadways for light vehicular movement, offering an economical and practical alternative for areas with limited infrastructure development. Stabilizing soil involves improving its engineering properties by incorporating additives such as cement, lime, or other binding materials. Through stabilization, the treated soil can achieve a compressive strength of approximately 5 N/mm², or 500 tonnes per square meter (t/m²), which is sufficient to support loads imposed …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 38–42 Read article
-
Nano Positioning for Large Scanning Range for XY Mechanism
Abstract: In this study, an XY flexure stage that provides a variety of motion options while reducing incorrect motions is designed and assessed. In the flexure design, the double parallelogram flexure modules are positioned methodically and symmetrically. The performance of the flexure stage is assessed using finite element analysis, and experimental testing is performed to validate the findings. The built-in prototype of the flexure stage has dimensions of 350 mm x …
Published in Journal of Microelectronics and Solid State Devices · Vol. 12, Issue 1, 2025 · pp. 30–35 Read article
-
Evaluating the behavior of Concrete after addition of stone dust to steel fiber reinforced concrete
Abstract: In contemporary construction practices, the utilization of concrete has become indispensable for various civil engineering projects worldwide. Concrete, augmented with both natural and artificial fibers, plays a crucial role in bearing compressive loads and efficiently transferring structural loads to the reinforcement and foundation. The current research delves into exploring the transformative effects of different mix designs, incorporating varying percentages of steel fibers, on the behavior of concrete. The study encompasses …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 12–19 Read article
-
Effect of Span, Load Intensity, and Beam Geometry on Stress and Deflection Behavior of RCC Beams
Abstract: This study investigates the influence of variations in beam geometry, span, load intensity, and permissible stresses on the structural behavior of reinforced concrete beams. Using classical bending and shear stress formulations, the effects of a 20% increase in key parameters were analytically evaluated. Results indicate that a 20% increase in beam span leads to a proportional 20% increase in beam depth, whereas a 20% increase in beam width or permissible …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 1, 2026 · pp. 9–22 Read article
-
Conducting an Experimental Study on the Behavior of Concrete Involves Partially Substituting Coarse Aggregate with Waste Granite Tiles and Fine Aggregate with Quartz Sandstone Powder
Abstract: In agricultural nations where cement is generally utilized, the high and consistently inflating cost of cement has made development over the top expensive. Removal of strong waste materials is an extraordinary worry in urban communities from one side of the planet to the other. A portion of these waste materials are not biodegradable, which frequently prompts removal emergency and natural contamination. Numerous endeavors are being made for the reusing of …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 26–34 Read article
-
Sustainable High-Strength Concrete: A Study on M60 Mixes with Alccofine as Supplementary Cementitious Material
Abstract: Concrete, which combines cement, water, aggregates, and admixtures to create a flexible material that solidifies into stone-like strength, is the foundation of contemporary building. Because of its versatility, it can be used for anything from pavements to skyscrapers, but typical mixes require large amounts of cement, which increases manufacturing costs and CO2 emissions. This study investigates the use ofAlccofine 1203, a powder made from ultrafine slag, as a partial substitute …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 33–41 Read article
-
Structure–Property Correlation of Infill Topology and Density on Tensile and Flexural Performance of FDM-Printed PLA and ABS
Abstract: Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has become a widely adopted manufacturing technology due to its design flexibility, low cost, and capability for rapid prototyping. However, the mechanical performance of FDM-printed components is strongly influenced by internal structural parameters such as infill pattern and infill density, in addition to the intrinsic material behaviour. This study investigates the structure–property relationship between infill topology, density, and mechanical performance of PLA …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 26–37 Read article
-
In-depth Evaluation of the CBR Method in Flexible Pavement Design
Abstract: The California Bearing Ratio (CBR) value of the subgrade is a crucial parameter utilized in the design of flexible pavements, as recommended by the Indian Roads Congress (IRC). The choice of materials used in constructing the pavement can significantly influence its overall design and performance. Pavements play an essential role in ensuring traffic flows smoothly, safely, and efficiently. Generally, pavements are categorized into two types: flexible and rigid. Flexible pavements …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 1–6 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Strength Enhancement of Concrete with Nano-Based Admixtures
Abstract: The integration of advanced nanomaterials such as nano-silica and nano-clay has emerged as a highly promising and innovative technique to significantly enhance the mechanical characteristics and long-term durability of conventional concrete. In this comprehensive study, the effects of nano-modification on various concrete properties, including workability, compressive strength, split tensile strength, and flexural behavior, were thoroughly evaluated through a systematic experimental program. A series of concrete mix designs incorporating varying proportions …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Optimization of Tensile and Flexural Properties of PETG Filament in FDM 3D Printing Using Response Surface Methodology
Abstract: Now a days manufacturing trend has been changed from subtractive to additive. In additive manufacturing (3D Printing), layer by layer deposition occurs and final product can be obtained. The main advantages of additive manufacturing is to obtain customized product, complex geometry product. This research investigates the optimization of tensile and flexural Strength of PETG filament in Fused Deposition Modeling (FDM) 3-d printing by using of Response Surface Methodology (RSM). Specimens …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 39–58 Read article
-
Dual Nozzle 3D Printing of Basalt Fiber–Reinforced Polymer Composites
Abstract: Additive manufacturing or 3Dprinting involves building a three-dimensional object by layering materials based on a computer-created design. Generally, 3D printing using single nozzle process where as strength, quality, wastage, and post reinforcement are drawback of this system. To eliminate and to enhance strength, precise control of fiber reinforcement, good bonding, no need of secondary reinforcement the dual nozzle 3D printing is an emerging additive manufacturing technique. In this process the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 620–630 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article
-
Effect of Hybridization on Tensile and Flexural Strengths of Carbon, Glass and Steel Fiber Composites: A Comparative Study
Abstract: Fiber reinforced polymer composites are widely recognized for their high strength-to-weight ratio, excellent corrosion resistance, and design flexibility making them ideal for various engineering applications. Despite their numerous advantages, traditional composites possess significant limitations such as restricted mechanical performance under diverse loading conditions. To address this, hybrid fiber polymer composites are developed while enhancing material performance. In the present study, synthetic (carbon, glass) and metallic (steel) fiber reinforced composite materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 621–635 Read article
-
Strengthening of RC Structures Using CFRP-Near Surface Mounted Technique
Abstract: This study reviews the literature on fiber-reinforced polymers (FRP) and their applications in near-surface mounted (NSM) applications. Since fiber-reinforced polymer (FRP) composites outperform many conventional steel reinforcing methods in terms of quality, they are nearly entirely dependent on advanced concrete technology. Many structures that will still be in use two decades from now have already been constructed. A portion of these structures must undergo enhancements or be replaced, as they …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 304–313 Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
Investigation of Mechanical Properties of Hollow Bricks Incorporating Aerated Aggregates: A Polymer-Cement Composite Approach
Abstract: The rapid advancement of construction technologies has necessitated the development of lightweight, thermally efficient, and sustainable building materials. Hollow bricks, due to their inherent voids, offer substantial reductions in dead load and enhanced insulation properties. However, their mechanical performance often falls short when compared to conventional solid bricks. To address this limitation, this study explores the synergistic integration of aerated aggregates and polymer-cement composites (PCCs) in hollow brick production. Aerated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 92–105 Read article
-
Recent Advances in Polymer Analysis and Characterization Techniques for High-Performance Materials
Abstract: Polymers play a vital role in various fields, from biomedical engineering to energy storage. Developing high-performance polymers requires a deep understanding of their structure, properties, and behavior. This review paper delves into recent advancements in polymer analysis and characterization techniques. This paper is a comprehensive bibliometric analysis which investigates the research landscape of geopolymer concrete incorporating construction and demolition waste (CDW) by analyzing 389 publications from the Web of Science …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 76–93 Read article
-
Performance of GFRP Bars in Flexural Members: A Comparative Study with Metal Bars Using FEA and Experimental Study
Abstract: In recent years, GFRP bars have been introduced as a replacement for metal bars as reinforcement in flexural members. This study evaluates the use of GFRP bars as the main reinforcement in flexural members such as beams through computer simulations and experimental work. A 4-meter beam from a sample structure, analyzed as per IS 875 (1987) Part 2, was considered for the study. This beam was designed considering both metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 262–267 Read article