Search
29 articles for “finned heat exchanger”
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article
-
Enhanced Heat Transfer in Double Pipe Heat Exchanger with Circular Fins Using Copper Nanofluid and Twisted Tape Inserts: A Computational Study
Abstract: The enhancement of convective heat transfer in a double-pipe heat exchanger utilizing circular finned twisted tape inserts and helical screw-tapes with centre rods, in conjunction with copper oxide nanofluid as the heat transfer medium was studied in this project. Computational Fluid Dynamics (CFD) simulations were conducted across Reynolds numbers ranging from 500 to 5000 to analyse heat transfer characteristics. The investigation focuses on Nusselt number improvement and friction factor analysis …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 11–22 Read article
-
Influence of Epoxy-Based Thermally Conductive Polymer Composites on the Thermo-Hydraulic Performance of Finned Helical Coil Heat Exchangers Across Flow Regimes
Abstract: The use of polymer composites in heat exchanger applications has gained increasing attention due to their advantages in weight reduction, corrosion resistance, and design flexibility. However, their relatively low thermal conductivity compared to conventional metallic materials remains a key limitation for efficient heat transfer. In this study, the thermo-hydraulic performance of a finned helical coil heat exchanger is investigated with particular focus on epoxy-based polymer composites reinforced with thermally conductive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 586–602 Read article
-
Design of Evaporator and Condenser for Solar Adsorption Refrigeration System
Abstract: Solar adsorption refrigeration systems provide a promising alternative for sustainable cooling in regions with limited grid access and high solar availability because they can convert low-grade thermal energy into refrigeration without mechanical compression. The performance of such systems depends strongly on the thermal behavior of the evaporator and condenser, since these components govern the refrigerant evaporation rate, condensation effectiveness, and overall cycle stability. This paper presents focus on the design …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 2, 2026 · pp. 1–10 Read article
-
Modeling and Simulation of Feed Forward Temperature Controller with Effect of Higher Gain on Chemical Reactors Heat Exchangers
Abstract: Chemical reactors are widely used in pharmaceutical process industries. The temperature controller design is an essential part of heat exchangers (HE) design for such reactors. The goal of this research is to design and validate the Feed Forward (FF) temperature compensator for the stared tank chemical rectors. The aim is to analyze the impact of high turbulence (Gain) performance on step response. For temperature management, a transfer function (TF) control …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 30–40 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Thermo-Hydraulic Enhancement of Annular Finned Shell-and-Tube Heat Exchangers Using Epoxy-Based Polymer Composites: A Material–Geometry Coupled CFD Investigation
Abstract: Shell-and-tube heat exchangers remain a backbone of industrial thermal systems, yet their performance is often limited by relatively low shell-side heat transfer and the weight and cost associated with conventional metallic components. In this context, the integration of polymer composite materials offers a promising pathway toward lightweight, corrosion-resistant, and performance-tunable heat exchanger designs. The present study investigates the thermo-hydraulic performance of a straight-tube shell-and-tube heat exchanger equipped with annular fins, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 669–684 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article
-
Advancements in Heat Exchanger Design for Improved HVAC System Efficiency
Abstract: Due to their direct impact on usage of energy, operational effectiveness, and environmental sustainability, heat exchangers have become vital components of the air conditioning, ventilation, and heating (HVAC) systems. The growing demand for energy-efficient HVAC solutions has driven extensive research and development efforts aimed at improving heat exchanger performance. Traditional designs, such as shell-and-tube and fin-and-tube heat exchangers, have long been utilized in HVAC applications. Nevertheless, these traditional types frequently …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 1, 2025 · pp. 44–52 Read article
-
Advancements in Waste Heat Recovery from Multistage Air Compressor Operations
Abstract: In industrial production processes, waste heat is an important consequence, especially in sectors that rely significantly on composites and polymers. Frequently, this heat is released into the atmosphere without being captured, which raises operating expenses in addition to wasting potential energy. In these sectors, waste heat recovery, or WHR, has become a key tactic for raising sustainability and energy efficiency. The WHR potential of multistage air compressors—essential parts of industrial …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 29–38 Read article
-
Thermal Performance of Concentrating Solar Panels
Abstract: The study shows a detailed analysis of the thermal performance of concentrating solar panels and the temperature increase due to concentrated solar radiation. This work proposes a configuration to reduce temperature rise, maintain good panel efficiency, and increase output power. The configuration is based on a sandwich structure including a phase change material (PCM), which absorbs the thermal energy excess generated by the concentrated solar radiation onto the PV panel. …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 1–10 Read article
-
Investigating the Influence of Process Parameters on Photochemical Machining of Phosphor Bronze Alloy Microchannels
Abstract: Microchannels are widely employed in microfluidic devices, biomedical systems, and compact heat exchangers, where their functional efficiency depends strongly on surface finish, dimensional control, and edge quality. Traditional machining techniques often face limitations in producing such features with the required precision, prompting the use of advanced micromachining methods. In the present work, photochemical machining (PCM) has been applied to fabricate serpentine-shaped microchannels in phosphor bronze. The study systematically investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 837–846 Read article
-
Experimental Investigation on Heat Transfer Enhancement in Shell and Tube Heat Exchanger Using Graphene Nanofluids
Abstract: The paper focuses on the dispersion of Graphene nanoparticles in a water–ethylene glycol based fluid to investigate their impact on the convective heat transfer performance of the resulting nanofluid. Various concentrations of graphene nanoparticles were prepared, and the nanofluids were subjected to different ultrasonication durations to ensure proper dispersion and stability of the nanoparticles within the base fluid. The study involved extensive experimental evaluation to systematically analyze how the nanoparticle …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 32–38 Read article
-
Modeling of MHD Hybrid Nanofluid Flow with Radiation and Chemical Reaction Effects for Advanced Composite and Energy Applications
Abstract: Hybrid nanofluids reinforced with polymer-based matrices and nanoparticles have emerged as promising working fluids for advanced composite processing and thermal management systems. Their superior thermo-physical properties enable efficient cooling and energy transport, making them suitable for applications in polymer extrusion, composite curing, thermal insulation coatings, solar energy devices, electronic packaging, and nuclear system cooling. In this study, we investigate the heat and mass transfer behavior of magnetohydrodynamic (MHD) hybrid nanofluid …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 648–660 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Waste-Heat Recovery Systems for Sustainable Industrial Energy Management
Abstract: Industrial processes consume vast amounts of energy, often resulting in substantial heat losses to the environment. Waste-heat recovery (WHR) systems provide a viable solution to harness this otherwise lost thermal energy, improving overall energy efficiency, reducing operational costs, and contributing to sustainable industrial practices. This study investigates the design, implementation, and optimization of waste-heat recovery systems across various industrial sectors, including power generation, chemical processing, cement production, and steel manufacturing.The …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 78–84 Read article
-
Land surface dynamics: A Multiphysics Approach to Modeling Mass Transport
Abstract: Land surface dynamics are governed by complex interactions among hydrological, atmospheric, and geomorphological processes that collectively drive the transport of mass across terrestrial environments. Traditional modeling approaches often isolate individual mechanisms, limiting their ability to capture the coupled feedbacks that shape landscape evolution. This study presents a multiphysics framework for modeling mass transport on land surfaces, integrating fluid flow, sediment transport, heat exchange, and chemical reactions within a unified computational …
Published in International Journal of Land · Vol. 2, Issue 2, 2025 · pp. 31–36 Read article
-
Investigating Temperature Effects on Thermal Analysis of Composite Heat Pipes with Diverse Geometrical Configurations
Abstract: As the demand for efficient heat dissipation technologies continues to surge, understanding the intricate interplay between temperature variations and the thermal performance of heat pipes assumes paramount importance. This study investigates the impact of temperature fluctuations on the thermal behaviour of heat pipes with diverse geometric configurations. A comprehensive analysis is conducted utilizing advanced computational simulations coupled with experimental validation techniques. Heat pipes are an innovative heat transfer device with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 20–34 Read article