Search
42 articles for “energy dispersive spectroscope”
-
Effects of Nano B4C Addition on the Solidification Behavior of Al-2219 Alloy Composites
Abstract: The inclusion of nano B4C particulates in Al-2219-Nano B4C alloy was investigated to understand their impact on hardness and wear characteristics. 500 nm-sized nano B4C particulates are used as reinforcements for structures in the Al2219 alloy matrix. The nanocomposites were fabricated using the two-stage liquid stir melt method with varying weight percentages (2, 4, 6, and 8 wt. %) of Nano B4C in the Al-2219 alloy matrix. Renewable energy dispersive …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 31–38 Read article
-
Synthesis and Applications of Copper- Doped Pyridine Precipitate
Abstract: A metal organic nonlinear optical single crystal, copper doped pyridine material, was created at room temperature using the slow evaporation solution growth technique (SEST). The developed material's crystalline nature was revealed by a powder X-ray diffraction (XRD) analysis. Single crystal XRD study shows that the material synthesized possesses monoclinic system of cell parameters, a = 11.44 Å, b = 7.92 Å, C = 11.74 Å and alpha and gamma is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 51–60 Read article
-
Catalyst-Driven Degradation and Failure Analysis of Intergranular Cracking in 316H Studded Pipes under Refinery Heat Recovery Conditions
Abstract: A failure analysis investigation was carried out on a high-temperature studded pipe used in a convection module for heat recovery in an oil and gas refinery application after leakage was detected during pre-commissioning hydrotesting. The investigated pipe was manufactured from AISI 316H austenitic stainless steel, and carbon steel studs had been joined to its outer surface by high-frequency resistance welding. Two leaks were reported in the pipe under investigation, and …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Properties and antimicrobial activity of bacterial nanocellulose composite incorporated with silver nanoparticles based on green synthesis
Abstract: Green silver nanoparticles (AgNPs) synthesized using medical plant extracts as capping and reducing agents demonstrate broad applicability in addressing the threat posed by infections. In this study, we present a sustainable, low-toxicity, and cost-effective bacterial nanocellulose composite with silver nanoparticles based on green synthesis that uses Origanum vulgare as a reducing agent due to numerous biological components. The formation of AgNPs in composite and morphological properties was analyzed using scanning …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 323–328 Read article
-
Synthesis and Structural Characterization of Nanocrystalline CeO2 and Ce0.95Cu0.05O2 Solid Solution Catalysts: Properties and Applications
Abstract: The main study and the development of CeO2 and Cu-doped CeO2 nanocrystals containing transition- metal species are of crucial importance for understanding the preparation and fabrication of CeO2 and Cu-doped CeO2 nanoparticles by solution combustion technique to taken glycine as fuel. The structural properties of Ce1-xCuxO2 nanocrystals were examined by investigating the influence of cerium dioxide and Cu dopant ions. The CeO2 single-phase cubic system was successfully incorporated with Cu …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 3, 2024 · pp. 29–38 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Electrospun Antibacterial Polymer Composite Scaffolds Incorporating Silver Nanoparticles for Enhanced Wound Healing
Abstract: The present study focuses on the synthesis and characterization of electrospun polycaprolactone (PCL)/chitosan nanofiber scaffolds incorporated with silver nanoparticles (AgNPs) to enhance antibacterial activity and biological performance. Uniform nanofibers with controlled morphology were fabricated using electrospinning, and different AgNP concentrations were introduced to investigate their influence on fiber structure, antimicrobial response, and cellular interactions. Scanning electron microscopy (SEM) revealed that increasing AgNP content resulted in well-distributed fibers with reduced diameters, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1025–1051 Read article
-
Microstructure Analysis and Material Properties of Weld Slag as Fine Aggregate in Concrete
Abstract: To reduce the amount of river sand used, researchers and engineers have developed their own solutions. The well-known technique of submerged-arc welding can create high-quality welds in a variety of thicknesses for ferrous, stainless, and even some non-ferrous metals. The procedure involves an electric current flowing constantly between a welding wire and the work piece, creating an arc. In submerged arc welding, the shielding flux is transformed into slag during …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 13–18 Read article
-
Enhancement of Mechanical Properties in Eutectic Al-Si Alloy Matrix Composites Reinforced with Kyanite and Graphite via Stir Casting
Abstract: The purpose of this work is to enhance the mechanical performance of a eutectic Al–Si alloy by incorporating hard ceramic (kyanite) and soft solid lubricant (graphite) reinforcements using a liquid-state stir casting route. Metal matrix composites were fabricated with kyanite contents of 2, 4, and 6 wt.% and a constant 2.5 wt.% graphite. Their microstructures and mechanical properties were systematically evaluated. The microstructure was examined using optical microscopy and energy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 90–100 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Synthesis and Structural Characterization of Nanocrystalline CeO2 and Ce0.95Cu0.05O2 Solid Solution Catalysts Properties and its Applications
Abstract: The Main study and the development of CeO2 and Cu doped CeO2 nanocrystals containing transition-metal species are of crucial importance for understanding the preparation and fabrication of CeO2 and Cu doped CeO2 nanoparticles by solution combustion technique to taken glycine as fuel. Here, we have investigated the effect of Cerium dioxide and Cu dopant ions on the structural properties of Ce1-xCuxO2 nanocrystals (NCs) synthesized via co-precipitation technique. XRD results confirmed …
Published in Journal of Catalyst & Catalysis Read article
-
Experimental Studies on the Mechanical and Microstructural Properties of Sustainable Concrete Incorporating Palm Oil Industrial Waste
Abstract: Diving into the world of concrete, normal concrete is widely used in construction but poses environmental challenges due to significant carbon dioxide emissions from cement production. Incorporating oil palm shells (OPS) and palm oil fuel ash (POFA) into concrete offers a sustainable alternative, utilizing waste products from the palm oil industry and reducing environmental impact. Experimental studies have examined the use of OPS and POFA as partial replacements for coarse …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 19–40 Read article
-
Combustion Synthesis and Comprehensive Characterization of Pure and Ni-Doped CuFe₂O₄ Nanoparticles for Functional Composite Applications
Abstract: The CuFe2-xNixO4 (x = 0, 0.1, 0.3, and 0.5) nanoparticles were synthesized using a combustion method and comprehensively characterized to understand their suitability for polymer-based composite applications. X-ray diffraction confirmed the formation of a single-phase spinel ferrite structure with crystallite sizes of 20–30 nm. Energy-dispersive X-ray spectroscopy verified the successful incorporation of Ni ions into the CuFe₂O₄ lattice, while FE-SEM analysis revealed uniformly dispersed nanoscale particles desirable for composite reinforcement. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Influence of Gd Doping in Structural, Morphological and Optical Properties of Zno Nanostructures Synthesised Via Sol-Gel Processes
Abstract: In this study, nanocrystalline Zn1-xGdx (x=0.0 and 0.03) samples were synthesised via the Sol-gel combustion process. An array of analytical techniques was employed to examine the prepared samples to determine their different physical features. For both pristine and Gd-doped samples, the crystal symmetry is hexagonal with the P63mc space group which is verified via the Rietveld refinement analysis of X-ray diffraction (XRD) data. The atoms' bond length Zn-O and bond …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 219–225 Read article
-
Effect of Bismuth doping on Thiourea crystals : A NLO Material
Abstract: Single crystals of pure and thiourea-substituted bismuth were successfully grown using the slow evaporation solution growth technique at ambient temperature. The impact of thiourea doping on the crystal properties was thoroughly investigated. Solubility tests for the grown samples were conducted at various temperatures, providing crucial data on the dissolution characteristics. Structural characterization of these crystals was performed using single crystal X-ray diffraction (XRD), confirming their crystalline nature. Energy-dispersive X-ray spectroscopy …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 10–16 Read article
-
Integrative Machine Learning Approaches for Predicting the Rheological Behaviour of Soft Magnetorheological Elastomers
Abstract: Magnetorheological Elastomers (MREs) are advanced composite materials known for their ability to alter mechanical properties under external magnetic fields, making them highly valuable in adaptive damping systems, vibration control, and smart devices. The accurate prediction of rheological behavior in soft MREs remains a significant challenge due to the complex interplay between material composition and magnetic fields. To address this challenge, this study employs a multi-pronged approach that integrates traditional material …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1083–1096 Read article
-
Green Fabrication of Glutaraldehyde-Crosslinked Chitosan/PVA Biocomposite for Heavy Metal Removal from Wastewater
Abstract: Chitosan (CS) and Polyvinyl alcohol (PVA) are polymers that possess biodegradable, biocompatible, and non-toxic properties, making them suitable for wastewater treatment applications. The primary objective of this research is to chemically modify chitosan in a novel manner to enhance its ability to remove hexavalent chromium Cr(VI) from aqueous solutions. In this study, a composite material was synthesized by crosslinking PVA and CS with glutaraldehyde (GA), resulting in the formation of …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 59–83 Read article