Search
143 articles for “electrodes”
-
Advanced Polymer Nanocomposite EEG Electrodes for Enhanced Epileptic Seizure Detection: A Comparative Analysis
Abstract: Electroencephalography (EEG) has been very important in the detection of epileptic seizures so as to enable successful diagnosis, surveillance and therapy of epilepsy. Nevertheless, EEG electrodes based on traditional metals may be limited due to high or high contact impedance, lack of biocompatibility, discomfort to patients and prone to motion artifacts, which interfere with signal quality and diagnostic adequacy. The recent progress in material science has resulted in coming up …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 Read article
-
Assessment of Carbon Fibre (CF) and Carbon Nanotube (CNT) as Supercapacitor Electrode on Surface Activated Nickel Foam
Abstract: In present paper, an attempt has been made to compare the potential of two different carbon-based materials, Carbon Fibre (CF) and Carbon Nanotubes (CNT), as electrode materials. These two materials are compared against each other in terms of their dimensions, volume of deposition on Nickel foam and their performance under Cyclic Voltammetry (CV). It was observed that owing to the dimensions of the depositing material, CNT (nano-sized carbon) electrode reflected …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 2, 2023 · pp. 10–14 Read article
-
Multiphysics Optimization of Polymer–Metal Hybrid Electrode Geometry in Electrostatic Precipitators for Enhanced Particle Collection Efficiency
Abstract: Electrostatic precipitators (ESPs) remain one of the most effective technologies for controlling fine particulate emissions in industrial exhaust systems. However, their performance is strongly influenced by electrode geometry and material characteristics, which govern electric field distribution, corona stability, and particle migration behaviour. In this study, a comprehensive numerical investigation is carried out to optimize electrode geometry using a multiphysics modelling framework, while introducing a novel polymer–metal hybrid design to enhance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 701–716 Read article
-
IoT-Connected Transparent Conductive Polymer–Silver Nano-Wire Electrodes for Real-Time Performance Monitoring of Flexible Solar Panels
Abstract: Flexible photovoltaic technologies have emerged as promising energy harvesting solutions for wearable electronics, portable power systems, and Internet of Things (IoT)-enabled smart devices. However, the limited mechanical durability of conventional transparent conductive electrodes and the lack of integrated real-time monitoring restrict their long-term reliability. This study presents an IoT-connected transparent conductive polymer–silver nanowire (PEDOT:PSS–AgNW) hybrid electrode for flexible solar panels, combining high optoelectronic performance with continuous wireless performance monitoring. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 1–18 Read article
-
Simulation of Electrostatic Microactuator with Two-Sided Electrodes
Abstract: Microcantilevers are the basic MEMS structures, which can be used as both sensors and actuators. The objective of this work is to study the concept of two-way deflection of the cantilever due to applied voltage and the ground. The proposed work is carried out by using Comsol/Multiphysics software which is based on the finite element method (FEM). The proposed work is modeled and simulated by selecting electromechanics as the physics …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 1, 2015 · pp. 10–15 Read article
-
Acetoxylation of o, m Cresol by Electrochemical Process at Graphite Electrode
Abstract: Electrochemical processes remain unique because of the nature of specific products formed and their mode of formation in which current is a reactive input in place of redox reagents. The high yields of the products can be obtained by designing and optimizing the electrolysis. The ordinary chemical procedures are multi-staged and may result poor yields. Therefore the best way for minimizing the pollution is transformation of conventional chemical processes to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 13–21 Read article
-
Comparative Study of Machining Parameters on Electrical Discharge Machining of Inconel 718 using Copper and Copper-Tungsten Electrode
Abstract: The present scenario in all the manufacturing industries is to make a priority list to cope up the challenges imposed by the superior materials like alloys, ceramics and composite materials which have difficulty in machining. In this study, comparison of experimental results which is found by optimization of machining parameters on material removal and tool wear rate along with two different electrodes material such as copper and copper tungsten for …
Published in Trends in Electrical Engineering · Vol. 8, Issue 2, 2018 · pp. 46–53 Read article
-
Fabrication and Study of Multiwall Carbon Nanotube based capacitor electrodes for Energy Storage Applications
Abstract: Current supercapacitors gift numerous wonderful boundaries that critically inhibit the performance,power, and electric capacitance of strength garage devices. Supercapacitors gift an thrilling prospect that has infinite packages in renewable strength garage and cutting-edge day digital devices. In current years thethrilling improvement of carbon nanotubes (CNTs) has offered a bonus in electrode improvement. CNTs, but useful for his or her improved electrode floor place, have extreme boundaries concerning conductivity and electrode …
Published in Journal of Semiconductor Devices and Circuits · Vol. 8, Issue 3, 2021 · pp. 56–60 Read article
-
Super Ni 718 Machinability Investigation on Electrical Discharge Machining Using Hybrid Al 7(075+178) Electrode Under Abrasive Assisted Dielectric
Abstract: As aluminum alloy is the lightest metal and has the best mechanical qualities among metal, it has proven to be a perfect choice for strututal industry, particularly in the aerospace sector.7xxx alloys from the Al alloy family are widely used in aviation constructions due to their outstanding processing, welding efficiency, great specific strength & stiffness, and high toughness. The two aluminum alloys that are most frequently used in airplane structures …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1–17 Read article
-
Growth of Cu2O on TCO by SILAR method acts as an alternative buffer electrode layer towards the development of organic solar cell
Abstract: In many types of optoelectronic devices, layer of PEDOT: PSS is sandwiched between the indium-tin oxide (ITO) electrode and the active layer. Buffer PEDOT: PSS provides a well- defined work function which is higher than that of ITO (4.2eV), it smooths the ITO surface and so avoids shorts, and it also protects the active layer from ingress of indium or oxygen, leading to longer device lifetimes. The role of PEDOT: …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 20–27 Read article
-
Effect of Annealing Temperature on the Structural, Morphological and Electrochemical Properties of Ruthenium Oxide Electrodes
Abstract: Transition metal oxide thin films are in great demand for a variety of technical applications, Ruthenium oxide is one of them having distinct structural, optical, chemical, and electrical properties. The structural and morphological characterization of Ruthenium oxide thin film electrodes created using the sol-gel spin coating process is covered in this work. For annealing, temperatures between 200°C and 900°C were employed. To examine electrochemistry, cyclic voltage measurement and chronopotentiometry were …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 15–24 Read article
-
The Impact of Distinct Dopant Elements (Cu and Al) on the Electrochemical Characteristics of MgO Thin Films Formed Using the Electrodeposition Technique
Abstract: By using an aqueous electrodeposition technique, copper (Cu) and aluminum (Al) doped magnesium oxide (MgO) thin films were created. We examined how the dopant elements affected the electrochemical characteristics of MgO thin films deposited on stainless steel (SS) substrates in the current study. We annealed the MgO-based films at 450◦C. The MgO films doped with Cu and Al have been determined by X-ray diffraction (XRD) results. Cyclic voltammetric analyses (CV), …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 2, 2023 · pp. 12–17 Read article
-
Polymer Waste-Derived Activated Carbon from PET for High-Efficiency Supercapacitor Electrodes
Abstract: The exponential increase in plastic waste, particularly Polyethylene Terephthalate (PET)—a polymer characterized by its repeating aromatic terephthalate units and ester linkages—has escalated into a global environmental crisis. This study details a low-cost synthesis of porous carbon materials derived from waste PET via pyrolysis followed by chemical activation with calcium hydroxide (Ca(OH)2). During pyrolysis, the PET polymer chains undergo thermal degradation, where the aromatic rings in the backbone serve as precursors …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1419–1447 Read article
-
Experimental Investigation on Mechanical Characterization of Electrodeposited Shot Peened Copper Coated and Un-Coated Mild Steel
Abstract: The fatigue strength of fabricated copper coating on mild steel specimens under repeated loading and the overall number of cycles to failure has been investigated. The specimens of copper coating on mild steel substrate are fabricated by using an electro deposition shot peening method. The hardness behaviour of fabricated specimens studied and the experimental work has been carried out by using Vickers Micro Hardness under the load of 20N force. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 279–288 Read article
-
Electrodeposition and Magnetron Sputtering of Rhenium Coatings on Carbon-Carbon Composites for Enhanced Corrosion Resistance and Structural Integrity
Abstract: It is well known that tailored materials are gaining in-roads to aviation and other manufacturing industries where stringent requirements are to be met, due to high temperature erosion, which is a problem. In order to counter these issues, materials which can resist a very high temperature are to be sought. One of the several methods to combat this high temperature issue is to provide a metallic refractory material coating on …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 35–44 Read article
-
A Review on Shielded Metal ARC Welding
Abstract: Shielded metal arc welding (SMAW) is the world's most popular welding process. In this process consumable electrode is used for generating arc. The electrode is coated with a shielding flux. The flux melts with the electrode metallic core, forming gas and slag, shielding the arc and the weld pool. The flux cleans the metal surface and protects the molten metal from oxidation and stabilizes the arc. The molten electrode metal …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 1–5 Read article
-
Smart Cardiazmo Implemented Using Internet of Things
Abstract: In this research, we present a system that uses sensors to identify a person's heart rate utilizing heartbeat sensing even if they are at home. The idea is to detect a heart attack early enough that the patient can receive medical help within the first few hours. As a result, his or her chances of survival are considerably increased. Here we use the AD8232 sensor for the cardiography of the …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 9, Issue 3, 2021 · pp. 35–48 Read article
-
Na-Air Battery: The Battery of the Future—A Review
Abstract: Metal-ion batteries came into the limelight with the invention of Zn-ion battery as early as 1878, but its commercial viability came into picture in 1990 and lithium-ion cell in 1977. Since then, a number of metals have been experimented upon and similar rechargeable secondary storage batteries like Al-ion, Na-ion, Sn-ion, Mg-ion, K-ion have been developed. In this type of battery, electrochemical dynamics involves the movement of only one kind of …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 3, 2024 · pp. 1–19 Read article
-
Synthesis of A Supercapacitor Based on Nanomaterials
Abstract: Demand for various energy storage technologies in electronic and electrical devices continuously goes on increasing. In that context, objective of this research work is to develop and test an electrode of a energy storage module (supercapacitor) using nickel hydroxide and carbon-based nanocomposite materials. Electrochemical performance of electrode is enhanced by optimizing synthesis parameters and designing the electrochemical cell. Conventional and all solid-state supercapacitors are developed with notable electrochemical performance. Pure …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 24–39 Read article
-
Experimental Investigation on Machining of AISI 1045 Stainless Steel by using Cryogenic Cooling of Micro EDM Drilling Process
Abstract: In this experimental work, the cryogenic cooling of the Micro-EDM (µEDM) drilling process for improving the performance and quality of micro holes. The controllable parameters such as the current (Ip), pulse on time (Ton), Pulse off time (Toff) and gap voltage (Vg) were chosen for further investigation. The Taguchi L27 orthogonal array is preferred to achieve the best experimental runs. Case hardened AISI 1045 stainless steel is selected to perform …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 21–37 Read article